Announcement

Collapse
No announcement yet.

30 Second Delay

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • joegr
    replied
    Originally posted by rmuziani View Post
    That might work, but I am still on 2.0
    It's the same thing. Create an event that is manual with conditions. Then do run event with 30 second delay from the first event. Switch to advanced view if that is not already selected, then put a check in the box for "<input class="formcheckbox" checked="" value="TRUE" name="evCheckConditions" type="checkbox"> Run Only If Conditions are TRUE (Applies to all RUN EVENT actions in this event.)"

    Leave a comment:


  • mnsandler
    replied
    Originally posted by rmuziani View Post
    That might work, but I am still on 2.0
    post your question in the hs2 forum and see what you get back

    Leave a comment:


  • rmuziani
    replied
    That might work, but I am still on 2.0

    Leave a comment:


  • mwaite
    replied
    Originally posted by mnsandler View Post
    In HS3 there is an advanced option (click airplane) to display the option which requires the conditions to be try before the second event runs. check the box!
    Well OK! I never knew that was there! (actually I never had a need to run an event from an event in HS3 before , very useful!)

    Leave a comment:


  • mnsandler
    replied
    if this doesn't do it, please explain what you are trying to do; there is probably another way

    Leave a comment:


  • mnsandler
    replied
    In HS3 there is an advanced option (click airplane) to display the option which requires the conditions to be tested before the second event runs. check the box!
    Last edited by mnsandler; August 9, 2015, 08:19 AM.

    Leave a comment:


  • mwaite
    replied
    Originally posted by mnsandler View Post
    you probably need two events. one to start an event with a 30sec delay after the On or Off, then a second action to call the second event with the condition you want to check.

    you might get other suggestions in the hs general forum.
    I thought about that solution as well, but correct me if I'm wrong, when you tell an event to run another event, does it not bypass the conditions on the second event and just run the actions?

    Leave a comment:


  • mnsandler
    replied
    you probably need two events. one to start an event with a 30sec delay after the On or Off, then a second action to call the second event with the condition you want to check.

    you might get other suggestions in the hs general forum.

    Leave a comment:


  • rmuziani
    replied
    Thanks. That I know and the condition is already setup. My question is how do I make the event wait 30 sec. before checking the condition?

    Leave a comment:


  • joegr
    replied
    You can trigger a delayed event that checks the condition.

    Leave a comment:


  • rmuziani
    started a topic 30 Second Delay

    30 Second Delay

    How can I set up an event with conditions "device on or off" but I need it to wait 30 seconds before checking the condition? The event is triggered from Insteon Door Sensor
Working...
X