Using HS2 moving from a mainly X10 network to an Insteon Network.
I have a electrical plug in the Garage (currently an X10 plug).
To test the Insteon plug and the HS2 event, I have a test event that when the X10 plug A6 is turned ON (another for OFF), then it turns the Insteon Plug (top receptacle .. \14) ON (or OFF).
This works fine when you turn ON and OFF A6 in say .. 10-15 second intervals, however if you turn ON A6 and leave it ON .. the X10 A6 plug stays ON .. but between 2-4 minutes, the Insteon \14 plug turns OFF automatically.
I have detailed HS2 logging enabled and there is no log entry of a "\14 OFF" command only the ones that where driven by the A6 "ON" or "OFF".
If you go to the HS2 Status page, \14 shows as "ON" (yet its real status is "OFF" both by the light that is in the plug and the status light on the plug being RED).
I have scoured the Events to ensure that there is only the "ON" and "OFF" events that even refer to A6 or \14 ..
This issue can be repeated ..
Does anyone have thoughts of what is going on .. or how I can further diagnosis and remedy?
Don
I have a electrical plug in the Garage (currently an X10 plug).
To test the Insteon plug and the HS2 event, I have a test event that when the X10 plug A6 is turned ON (another for OFF), then it turns the Insteon Plug (top receptacle .. \14) ON (or OFF).
This works fine when you turn ON and OFF A6 in say .. 10-15 second intervals, however if you turn ON A6 and leave it ON .. the X10 A6 plug stays ON .. but between 2-4 minutes, the Insteon \14 plug turns OFF automatically.
I have detailed HS2 logging enabled and there is no log entry of a "\14 OFF" command only the ones that where driven by the A6 "ON" or "OFF".
If you go to the HS2 Status page, \14 shows as "ON" (yet its real status is "OFF" both by the light that is in the plug and the status light on the plug being RED).
I have scoured the Events to ensure that there is only the "ON" and "OFF" events that even refer to A6 or \14 ..
This issue can be repeated ..
Does anyone have thoughts of what is going on .. or how I can further diagnosis and remedy?
Don