Announcement

Collapse
No announcement yet.

Osram Lightify + Hue + Jowi Hue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • w.vuyk
    replied
    I received them, but was out for a long weekend. Will check them soon

    Wim

    Leave a comment:


  • Huntsvegas
    replied
    Wim,

    Sent two emails with log files. Let me know if you don't get them. Thanks in advance for any help.
    -Alan

    Leave a comment:


  • w.vuyk
    replied
    Go to the configuration page and enable the options detailed logging and save to file on the loggings tab.

    This will create a file "JowiHue.log" in the logs directory of the Homeseer installation directory. Then stop the plugin and delete the device for the strip.
    After that start the plugin, it shoud then recreate the device.

    Please send the log created to w dot vuyk at upcmail dot nl? I can then check if errors are logged in the detailed log? do not post the log on this forum.

    Thanks,

    Wim

    Leave a comment:


  • Huntsvegas
    replied
    Checking the logs, there was no error when adding. Usually verbose logs were actually kind of skimpy:
    Apr-18 11:56:43 AM JowiHue Scanning New lights started. If New lights are found the plugin will add them automatically
    Apr-18 11:56:58 AM JowiHue Devices added for new light Light 1
    Perhaps I can remove the light and try a re-add. Is there a setting to make the logs more verbose?

    Leave a comment:


  • w.vuyk
    replied
    The LEDVANCE range does not really follow the standard ZigBee specs. In this case I do not see the modelid in the object info, so the plugin cannot match it.

    I think the plugin might even have thrown an error while trying to add the light? Can you still check your HS3 logs for that (filter it so it will go back to the time you added the bulb)?
    The plugin should have been able to recognise the color functions based on the type, but it might have thrown an error before that....


    Wim

    Leave a comment:


  • Huntsvegas
    replied
    I just tried to add a Lightify SMART+ ZigBee RGBW light strip (Sylvania model
    73661)
    via Jowihue and it added as a single light without color controls. Any suggestion on how to have it show up properly with color controls? Here is the object info from JowiHue:

    **************************** Object info *****************************
    {
    "type": "Color dimmable light",
    "name": "Light 1",
    "swversion": "00102055",
    "uniqueid": "f0:d1:b8:00:00:00:75:d2-01",
    "manufacturername": "LEDVANCE",
    "state": {
    "on": false,
    "bri": 0,
    "hue": 10922,
    "sat": 254,
    "xy": [
    0.700587,
    0.29929
    ],
    "ct": 370,
    "alert": "none",
    "effect": "none",
    "colormode": "xy",
    "reachable": true
    },
    "etag": "1dcd7777b1c83e67d9b74a0bbeef74fe",
    "hascolor": true
    }
    ************************* End Object info ***************************

    Leave a comment:


  • Richel
    replied
    Originally posted by w.vuyk View Post
    One extra question.. did you restart the plugin or HS between removing the Ikea bulb and adding the sengled? My feeling says that if you did not do that, the plugin migh fail... not sure but it would be very helpfull if you can confirm this
    Wim:
    I don't think that I restarted either.
    Elliott

    Leave a comment:


  • w.vuyk
    replied
    One extra question.. did you restart the plugin or HS between removing the Ikea bulb and adding the sengled? My feeling says that if you did not do that, the plugin migh fail... not sure but it would be very helpfull if you can confirm this

    Leave a comment:


  • Richel
    replied
    Originally posted by w.vuyk View Post
    Elliot,

    Thanks. Is it possible that you had removed an Ikea some time before adding the Sengled? Maybe it took over the id in deCONZ and does the plugin some old info on this... will have to check if that could be the cause
    Yes, I did remove an Ikea bulb, which was not working (after I dropped it). Elliott

    Leave a comment:


  • w.vuyk
    replied
    Elliot,

    Thanks. Is it possible that you had removed an Ikea some time before adding the Sengled? Maybe it took over the id in deCONZ and does the plugin some old info on this... will have to check if that could be the cause

    Leave a comment:


  • Richel
    replied
    Originally posted by w.vuyk View Post
    Eliott,

    Could you check the properties of the new device/JowiHue tab and post the json that is on the bottom of that page? Sounds weird if it reports Ikea for sengled. Do you also have kea in your configuration or nothing at all?
    I hope this is what you want. I have 16 bulbs: 6 Osram Lightify; 9 Ikea Tradfri; 1 Sengled.
    **************************** Object info *****************************
    {
    "etag": "9102a48a23285194b01ec29242894b75",
    "hascolor": false,
    "type": "Dimmable light",
    "name": "Sengled (Light 16)",
    "modelid": "E11-G13",
    "swversion": "00000009",
    "uniqueid": "b0:ce:18:14:03:15:69:71-01",
    "manufacturername": "sengled",
    "BridgeSerial": "00212EFFFF027B73",
    "id": "16",
    "ref": 0,
    "RefBri": 0,
    "RefHue": 0,
    "RefSat": 0,
    "RefCT": 0,
    "RecoverUnreachable": false,
    "SuspectAfterDeRegistration": false,
    "state": {
    "on": false,
    "bri": 255,
    "alert": "none",
    "reachable": true
    }
    }
    ************************* End Object info ***************************

    Leave a comment:


  • w.vuyk
    replied
    Eliott,

    Could you check the properties of the new device/JowiHue tab and post the json that is on the bottom of that page? Sounds weird if it reports Ikea for sengled. Do you also have kea in your configuration or nothing at all?

    Leave a comment:


  • Richel
    replied
    Originally posted by cowinger View Post

    That is most interesting. I am on deconz 39 because they said 40 had problems. I have 2 sengled element plus adj white bulbs and they have a grey stripe.

    Are you on 39 or 40?

    What are all the types of sengled bulbs do you have, any like mine?
    I'm on version 2.0.05.39 of deConz. I did finally find the Sengled in HomeSeer. However, the "Device Type (String)" was brought in as "TRADFRI bulb E12 W op/ch 400lm." It is definitely not a TRADFRI, but Sengled "Element Classic Bulb, Model: E11-G13WA1." deConz has it as it correctly and adds that it is version 9.

    Elliott

    Leave a comment:


  • cowinger
    replied
    Originally posted by Richel View Post

    Wim:

    Thanks. Yes, I routinely restart the plugin when I do not find the device after it has scanned for a new devices. I restarted deConz, too, and now I see the light bulb icon as being the same as any light bulb; namely, it has a yellow bar at the left and it is now connected with lines, including a green one to the controller icon.
    Elliott
    That is most interesting. I am on deconz 39 because they said 40 had problems. I have 2 sengled element plus adj white bulbs and they have a grey stripe.

    Are you on 39 or 40?

    What are all the types of sengled bulbs do you have, any like mine?

    Leave a comment:


  • w.vuyk
    replied
    That is a surprise... maybe it is a newer model that supports routing? Good news, but did it also proceed to the plugin? Appearantly deCONZ did not get the basic cluster completed, so maybe now it is also forwarded?

    Wim

    Leave a comment:

Working...
X