RK15 ok i am going to need you to send some command with Packet Sender. sorry to be a pain
if works should set red to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 FF 00 00 00 00 F0 0F 2F"
if works should set red to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 FF 00 00 00 F0 0F 2F"
if works should set warm white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 FF 00 0F 0F 4E"
if works should set cool white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 00 FF 0F 0F 4E"
if works should set warm white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 FF 0F 0F 4E"
can you just tell me if any work, i suspect both 1, 3, 4 should work for you, if so will require one more bulb type to be created in app if none work then i think the v8 firmware will be offering something else additional and i will have to see if i can purchase a device. but i don't have the same available for same in the UK. I do have however
https://www.amazon.co.uk/Equivalent-...agic+Home+Bulb
which hopefully with a later version i may hit the same issue. but if you can let me know the results above before i purchase a bulb i don't need
if works should set red to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 FF 00 00 00 00 F0 0F 2F"
if works should set red to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 FF 00 00 00 F0 0F 2F"
if works should set warm white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 FF 00 0F 0F 4E"
if works should set cool white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 00 FF 0F 0F 4E"
if works should set warm white to 100%
packetsender -xtw 500 <bulb IP> 5577 "31 00 00 00 FF 0F 0F 4E"
can you just tell me if any work, i suspect both 1, 3, 4 should work for you, if so will require one more bulb type to be created in app if none work then i think the v8 firmware will be offering something else additional and i will have to see if i can purchase a device. but i don't have the same available for same in the UK. I do have however
https://www.amazon.co.uk/Equivalent-...agic+Home+Bulb
which hopefully with a later version i may hit the same issue. but if you can let me know the results above before i purchase a bulb i don't need
Comment