I was interested in setting up BLE scanning with a spare ESP32 I had laying around.
Walking through the setup, we are told to enter the command (or similar depending X,X):
"ScannerLocation 1,10,20"
This command doesn't seem to do anything:
Furthermore, I've got the ESP32 configured as documented (AFAIK), but I do not see anything scan related. I appear to be using the same binaries as in Figure 43 of the guide;
By way of comparison, I am not seeing the /CONFIG echo.
Thanks!
Walking through the setup, we are told to enter the command (or similar depending X,X):
"ScannerLocation 1,10,20"
This command doesn't seem to do anything:
Code:
20:09:30 HTP: Console 20:09:33 CMD: ScannerLocation 1,10,20 20:09:33 RSL: Group 0, Index 1, Command SCANNERLOCATION, Data 1,10,20 20:09:33 MQT: BLE-Scan/1/stat/RESULT = {"Command":"Unknown"}
Code:
00:00:00 CFG: Loaded from flash at 0, Count 39 00:00:00 APP: Boot Count 27 00:00:00 APP: Set Baudrate to 115200 00:00:00 Project sonoff esp32_BLEScan-1 (Topic BLE-Scan, Fallback BLEScan_1-ESP32, GroupTopic BLE-Scanners) Version 5.12.0c-STAGED 00:00:00 CFG: Saved to flash at FFFFFFFF, Count 40, Bytes 1680 00:00:00 WIF: Attempting connection... 00:00:00 WIF: Connecting to AP1 IOTGroup in mode 11 00:00:01 WIF: Connected 00:00:01 DNS: Initialized 00:00:01 HTP: Web server active on BLE-Scan-2700.local with IP address 192.168.1.81 00:00:01 APP: (UTC) Sun Aug 9 15:17:41 2020, (DST) Sun Aug 9 15:17:41 2020, (STD) Sun Aug 9 15:17:41 2020 20:17:43 HTP: Main Menu 20:17:43 MQT: Attempting connection... 20:17:43 MQT: Connected 20:17:43 MQT: BLE-Scan/1/tele/LWT = Online (retained) 20:17:43 MQT: BLE-Scan/1/cmnd/POWER = 20:17:43 MQT: Subscribe to BLE-Scan/1/cmnd/# 20:17:43 MQT: Subscribe to sonoffs/1/cmnd/# 20:17:43 MQT: Subscribe to cmnd/BLEScan_1-ESP32/# 20:17:43 MQT: BLE-Scan/1/tele/INFO1 = {"Module":"WEMOS","Version":"5.12.0c","FallbackTopic":"BLEScan1","GroupTopic":"BLE-Scanners"} 20:17:43 MQT: BLE-Scan/1/tele/INFO2 = {"WebServerMode":"Admin","Hostname":"BLE-Scan-2700","IPAddress":"192.168.1.81"} 20:17:43 MQT: BLE-Scan/1/tele/INFO3 = {"RestartReason":"12"} 20:17:45 HTP: Console 20:17:52 MQT: BLE-Scan/1/tele/STATE = {"Time":"2020-08-09T20:17:52","Uptime":"0T00:00:12","Wifi":{"AP":1,"SSId":"IOTGroup","RSSI":100,"APMac":"22:3C:E8:81:4C:85"}})
Thanks!
Comment