Supported hardware by Modbus PI

[John245]

The purpose of this thread is to list (in alphabetical order) all hardware supported by the Modbus PI. You will get an idea of hardware available on the market. If you use hardware in combination with the Modbus PI and it is not listed, please add as much as possible information and I will update the list.

Nibe Modbus 40 communication module
Manufacturer: Nibe
Device type: Communication module
Model: Modbus 40

Test results:
Tested with: Modbus PI v3.7.5894.16328 (serial RTU master); Nibe F1245-10 PC (FW 7113R3)
Functionality tested: read-out Holding Registers; write to Holding Registers

Limitations:
Function 0x2B not supported by Modbus PI

Notes:
Simultaneously up to 53 addresses tested (with a poll interval of 5 minutes)


SunMaster to Modbus-RTU converter
Manufacturer: CEL-MAR
Device type: Converter
Model: ADA-4040-PC3
Firmware: 008
CPU version: 002
Link: http://cel-mar.pl/en/rs485rs422_rs48....htm?idk=1#poz

Test results:

Tested with: Modbus PI v3.7.5894.16328 (serial RTU master); Mastervolt XS2000 FW 4.00; Mastervolt ES 3.6 TL FW 3.01
Functionality tested: read-out Input Registers; read-out Holding registers

Limitations:
- None (all functionality as described in the manual tested)

Notes:
- None

KOICONTROL system
Manufacturer: Koitronics
Description: Monitoring of water values (pond)
Device type: NA
Model: NA


Test results:

Tested with: Modbus PI v3.7.5907.32639 (IP RTU master);
Functionality tested: low alarms; high alarms; setting low- and high alarm setpoints; read-out values; reset alarm; general alarm

Limitations:
- None (all functionality as described in the manual tested)

Notes:
- None

---
John