Release 4.1.16.0, 25-02-2024
- New: IP address override
- Imp: Device naming
- Fix: Duplicate feature names for Smile P1
- Fix: “Do not set Image directly” error
- New: Support for the Jip, Koen and Aqara Smart Plug
- Fix: Watt unit switching
- Imp: Minor fixes and stability improvements
- Fix: Duplicate Watts features
- New: Energy Logging and Graphing for Smile P1 v2 and v3
- New: Energy Logging and Graphing for Stretch v2 and v3
- New: List of all Stick devices for easier troubleshooting
- Fix: Anna presets (firmware 4.019)
- Fix: HS4 Energy Logging setting
- Fix: Stick devices no longer updating
- New: Categories
- Fix: Watt Hours updates (Stick)
- Fix: Manual On/Off (Stick)
- Fix: Unresponsive device after Node ID change (Stick)
- Fix: Do not overwrite names of existing devices/features
- New: Settings from version 4.0.0.x are now being migrated
- New: Status feature for Circles (Stick)
- More stable switching of Circles (Stick)
- Initial HS4 version
- Note: Scan status no longer provided (Stretch 2 and 3)
- Fixed IP discovery in setup
- Added support for Anna 3.1.16 firmware
- Added support for Smile P1 v3
- Status values between 0.00 and 1.00 are now being displayed as %
- Added support for Adam firmware 3.x
- Added Adam “regulation mode control”
- Added battery status support (supported devices connected to Adam only)
- New: Support for Tom
- New: Support for Floor (experimental)
- Fixed: Adam device icons
- Fixed: Support for latest Adam firmware (avoid XML null errors)
- Fixed: Log device updates (again)
- Improved: Multiple stick support (Linux)
- Fixed: Log device updates
- Fixed: Crash when changing system date/time
- Fixed: Crash on serial read error (Linux)
- Fixed: Duplicate log entries
- Improved: Serial port handling and disconnect/reconnect
- New: Support for the Plug connected to the Adam
- Fixed: Unable to control Stick devices after upgrade
- Fixed: Stick devices unresponsive after a multi-instance upgrade
- Changed: Version 4 and higher are no longer free
- Removed: Script functions (use hs.DeviceValue etc instead)
- Removed: Plugwise specific events (use regular event triggers instead)
- Removed: Total usage device (use a Smile P1 for real total usage)
- Stick:
- New: Unlimited number of Sticks supported
- Setup improved
- New: Status indication if the accompanying process is started
- Improved: More logging options
- Improved: Communication with the stick
- Removed: Offline check for Scan and Switch devices (they do not report their status on a regular interval)
- Improved: Detection of devices (especially battery powered devices)
- Removed: Manual adding of devices
- Changed: HomeSeer devices are "Z-Wave" style with a root device and all device values are stored in separate child devices.
- Changed: Online/Offline status is moved to the root device
- Stretch:
- New: Unlimited number of Stretch gateways supported
- Setup improved
- New: Network address discovery added
- New: Status indication if the accompanying process is started
- Improved: More logging options
- New: Stretch 3.0 support added.
- Improved: Stealth (M) modules are now working as expected
- New: Scan, Sense and Switch modules support added
- New: Switch can be configured to use all four buttons independently
- Adam:
- New: Support for the Adam gateway
- New: Unlimited number of Adam gateways supported
- New: All information from the Adam is available, with specific functions for thermostat values, offsets, relays, presets and buttons.
- New: Lisa support
- Koen, Tom, Floor and Plug have not been tested and most likely not (completely) work as expected, if at all.
- Anna:
- New: Support for the Anna thermostat
- New: Unlimited number of Anna thermostats supported
- New: All information from the Anna is available, with specific functions for thermostat values, offsets, relays, presets and buttons.
- Smile P1:
- New: Unlimited number of Smile P1 meters supported
- Setup improved
- New: Network address discovery added
- New: Status indication if the accompanying process is started
- Improved: More logging options
- Various stability improvements
- Fixed: Crashes when using Windows 10
- Fixed: Interval setting
- Fixed: Crashes when Smile P1 fails to retrieve data
- New: Retries for non-responsive devices (configurable, stick devices only)
- New: "Unknown" status for non-responsive devices (configurable, stick devices only)
- Improved: "Last Change" date/time behavior (required HS4 build 194 or higher, WARNING: this might impact events that trigger on the last update field):
- If "Do not update device last change time if device value does not change" is disabled, it will update on both status change and power usage update
- If "Do not update device last change time if device value does not change" is enabled, it will only update on status change, not on power usage update
- Fixed: Debug logging to file on Linux
- Improved: Removed unnecessary polling (usage data twice as fast!)
- Fixed: Event not triggering when a condition is set
- Fix: Crash on corrupt XML received (again)
- New: Exclude from total device added
- Fixed: Crash on corrupt XML received
- Initial features
- Runs without Plugwise Source
- Support for Plugwise Circle
- Support for Plugwise Stealth
- Support for Plugwise Sense
- Support for Plugwise Scan
- Support for Plugwise Switch
- Support for Plugwise Smile P1
- Support for Plugwise Stretch
- Support for Energy charting
- Support for HS3 Windows and Linux
- Support Multi instances
- Support Remote instances