X10 mistaken identity

[cjin]

I am really puzzled by my X10 Leviton 4 button keypad... I created 4 devices in HS, keypad 1 = code I1, keypad 2=code I2 etc. When sending commend from HS to the keypad everything behaves as expected. When operate the keypad manually, log in HS seems normal (did I miss something in the log below?) but no matter which number keypad you press, it always changes keypad 1 devise in HS. For example, if you press keypad 2, keypad 2 device in HS doesn't change, but keypad 1 device in HS does.

Here are some logs:

----- HS turns on keypad 1, keypad 1 responds normally -------
Nov-25 9:19:26 PM Device Control Device: First Floor Family Room Family Rm Keypad 1 to On (100) by/from: CAPI Control Handler
Nov-25 9:19:26 PM X10 INFO SendX10: I1 Cmd: 2 Dim: 0 Data1/2: 0/0
Nov-25 9:19:26 PM X10 INFO Output Dequeue: $>28001I01I01 D1#
Nov-25 9:19:26 PM X10 INFO Output Dequeue: adr
Nov-25 9:19:26 PM X10 INFO Output Dequeue: $>28001IONION 49#
Nov-25 9:19:26 PM X10 INFO Output Dequeue: cmd2
Nov-25 9:19:27 PM X10 INFO Raw Poll: 76767.131166 - $<2800! I01I01 IONIONAB#
Nov-25 9:19:27 PM X10 INFO InParsed(0): $<2800! I01I01 IONIONAB#
Nov-25 9:19:31 PM X10 INFO ProcessX10: $<2800! I01I01 IONIONAB#

----- HS turns on keypad 2, keypad 2 responds normally -------
Nov-25 9:29:21 PM Device Control Device: First Floor Family Room Family Rm Keypad 2 to On (100) by/from: CAPI Control Handler
Nov-25 9:29:21 PM X10 INFO SendX10: I2 Cmd: 2 Dim: 0 Data1/2: 0/0
Nov-25 9:29:21 PM X10 INFO Output Dequeue: $>28001I02I02 D3#
Nov-25 9:29:21 PM X10 INFO Output Dequeue: adr
Nov-25 9:29:21 PM X10 INFO Output Dequeue: $>28001IONION 49#
Nov-25 9:29:21 PM X10 INFO Output Dequeue: cmd2
Nov-25 9:29:24 PM X10 INFO Raw Poll: 77364.8950916 - $<2800! I02I02 IONIONAD#
Nov-25 9:29:24 PM X10 INFO InParsed(0): $<2800! I02I02 IONIONAD#
Nov-25 9:29:28 PM X10 INFO ProcessX10: $<2800! I02I02 IONIONAD#

----- Manually turns on keypad 1, keypad 1 device in HS turns on -----
Nov-25 9:31:29 PM X10 INFO Raw Poll: 77489.3028992 - $<2800! I01I01 IONIONAB#
Nov-25 9:31:29 PM X10 INFO InParsed(0): $<2800! I01I01 IONIONAB#
Nov-25 9:31:33 PM X10 INFO ProcessX10: $<2800! I01I01 IONIONAB#
Nov-25 9:31:33 PM X10 INFO Callback: Dev= I1, HC= I, Cmd= 2, 0/0

---- Manually turns on keypad 2, keypad 1 device in HS turns on despite log shows I2 address ----
Nov-25 9:36:02 PM X10 INFO Raw Poll: 77762.136313 - $<2800! I02I02 IONIONAD#
Nov-25 9:36:02 PM X10 INFO InParsed(0): $<2800! I02I02 IONIONAD#
Nov-25 9:36:06 PM X10 INFO ProcessX10: $<2800! I02I02 IONIONAD#
Nov-25 9:36:06 PM X10 INFO Callback: Dev= I2, HC= I, Cmd= 2, 0/0

[mfisher]

How did you create devices 2, 3 and 4 in HS3, did you create new devices or did you copy the 1st device then change the settings? If you created these by copying a device I would recommend deleting these and recreating them from scratch using these instructions: https://forums.homeseer.com/forum/li...very-important

What version of the HS3 HomeSeer X10 plugin are you using?
What OS (Windows or Linux) are you running HS under?

[TeleFragger]

which keypad is it?

[cjin]

How did you create devices 2, 3 and 4 in HS3, did you create new devices or did you copy the 1st device then change the settings? If you created these by copying a device I would recommend deleting these and recreating them from scratch using these instructions: https://forums.homeseer.com/forum/li...very-important

What version of the HS3 HomeSeer X10 plugin are you using?
What OS (Windows or Linux) are you running HS under?

Thank you! This is exactly my problem. I created device 2,3,4 by copying device 1 then change their code. Delete then recreate devices from scratch fixed this problem.



Sent from my iPad using Tapatalk

[TeleFragger]

Thank you! This is exactly my problem. I created device 2,3,4 by copying device 1 then change their code. Delete then recreate devices from scratch fixed this problem.



Sent from my iPad using Tapatalk

yeah x10 is picky.. just like motion sensors.. if you check off virtual device, it gets rid of the on off button in hs.. its virtual and motion who cares... breaks device..or used too as i havent tried in a while

[mfisher]

Thank you! This is exactly my problem. I created device 2,3,4 by copying device 1 then change their code. Delete then recreate devices from scratch fixed this problem.



Sent from my iPad using Tapatalk

Great, glad this resolved your issue!