problem x10 plugins with ti103

[betheclub99]

my problem in the log message appear: Error in Ti103.CommThreadLoop():Fonction incorrecte
What is the problem?
Thank you...

[mfisher]

What is HS trying to do with X10 at the time this error occurs? Are you controlling a device from the UI, controlling a device from an event, receiving X10 data or ??

[betheclub99]

i control the device (appliance module x10)
After sunset i run event (Open light) (Switch on , B1, C1 and D1 module appliance).

[mfisher]

Does the event run and do the controlled devices switch on?
Is this the only X10 related event that causes the error?
Can you please post a screen shot of the event(s)?

[betheclub99]

no the event no run, no device switch on or off
i dont not if other event cause problem
I supposed this event cause problem not sure.
Last day this event execute normaly 16:04 and run at 16h39 ?

[betheclub99]

[lhfarm]

I have a log full of the same errors.

Date/time=12/2/2020 6:48:36 AM Eastern Standard Time
Version=HS4 Pro Edition 4.1.9.0 (Windows)
License=Registered
License ID=
MyHS Subscription=Basic
MyHS Subscription Backup Interval=No Backup
MyHS Subscription Max Cameras=1
Confguration File=C:\Program Files (x86)\HomeSeer HS3\Data\HomeSeerData.json
In Virtual Machine=No MFG: dell inc.
Antivirus=Norton Security Online Norton Security Online Windows Defender Norton Security Online
OS=Microsoft Windows 10 Pro - Work Station
OS Version=10.0.19041
Uptime=1 Day 20 Hours 36 Minutes 32 Seconds
User/Access=bt (Admin)
Lan IP=192.168.1.40 (HS4)
WAN IP=68.50.58.72 ()
Device Count=342
Event Count=138
Last Event Ran=Weather : Weather page test, Ran at 12/2/2020 6:47:25 AM
# of unique event scripts=1
Connected Speaker Clients=HS4 (192.168.1.)ESKTOP-IQDE7FK, HS4 (192.168.1):RASPBERRYPI
Processor:=Intel64 Family 6 Model 42 Stepping 7 at 3.17 GHz
Modules/Threads=130 Modules, 98 Threads
Available Threads=1023
System Load=166 Processes, 4% Load
Free/Total Memory=12.15 GBytes / 15.88 GBytes (76% free)
Free/Total Virtual Memory=14.36 GBytes / 18.26 GBytes (79% free)
HomeSeer Memory Used=110 Mbytes
Plugin Memory Used=10 EXE Plug-Ins using 427 Mbytes
Plugins Installed=Arduino Plugin 1.0.0.131,BLMediaPlayer 3.0.15.0,EasyTrigger 3.0.0.71,HSBuddy 3.18.721.0,Nest 3.0.0.34,Ultra1Wire3 3.0.7364.22993,UltraGCIR3 3.0.6551.16959,weatherXML 3.0.1.19,X10 3.0.0.46,Z-Wave 3.0.2.261

[mfisher]

betheclub99 A few questions:

1. What OS are you running HS under?
2. Which version of HS are you running?
3. Which version of the X10 plugin are you running?

lhfarm Thanks for reporting this issue as well and for the HS 'About' info, it's super helpful.

1. What action(s) in HS seem to trigger this error?
2. Does controlling a device from the HS U/I work properly?

[betheclub99]

i running HS4 with edge

[lhfarm]

betheclub99 A few questions:

1. What OS are you running HS under?
2. Which version of HS are you running?
3. Which version of the X10 plugin are you running?

lhfarm Thanks for reporting this issue as well and for the HS 'About' info, it's super helpful.

1. What action(s) in HS seem to trigger this error?
2. Does controlling a device from the HS U/I work properly?

I've installed v3.0.0.50 and will monitor.

Barry

[betheclub99]

before sunset,
difficult to control device in this event, yes. Probably noise
the noise no cause error in log...

[betheclub99]

just device D1
thank you for help
I am a programmer analysis, it is possible to help you
sorry for bad engliah

[lhfarm]

I've installed v3.0.0.50 and will monitor.

Barry

No new messages since I did the install. Thanks.

[betheclub99]

Last time to long error 1 december and no event run before error generate

[betheclub99]

is possible the error not generate by event?
just problem with ti103?