Announcement

Collapse
No announcement yet.

Nano Dimmer Switch2 - No status in Homeseer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nano Dimmer Switch2 - No status in Homeseer

    Hi All,

    Need some help. I have the Aeotec Nano Dimmer installed in a double light switch. I can't get switch 2 status to show up in homeseer. Does anybody know how I can do this?
    Current Config below:

    Click image for larger version

Name:	S2.png
Views:	65
Size:	102.4 KB
ID:	1305573

    I have set the following z-wave parameters :
    Parameter 80 = 3
    Parameter 81= 1
    Parameter 82 = 1
    Parameter 120 = 1
    Parameter 121 = 1
    Parameter 123 = 1
    Parameter 124 = 2
    Parameter 249 = 0

    I have set the following Associations in homeseer:
    Group 1 = Homeseer (ID:1)
    Group 2 = Homeseer (ID:1)
    Group 3 = Homeseer (ID:1)
    Group 4 = Homeseer (ID:1)

    The nano dimmer is wired as follows:
    RED wire is back to load
    BLACK wire is common going to both switches
    ORANGE wire is going to switch 1
    GREEN wire is going to switch 2
    Click image for larger version

Name:	dimmerwiring.png
Views:	35
Size:	43.1 KB
ID:	1305574

    Nano Dimmer Information below:

    Click image for larger version

Name:	nanodimmerinfo.png
Views:	37
Size:	103.4 KB
ID:	1305575
Working...
X