Hi Everyone,
I have completed the installation of 120 or so WD200's in a clients home. I have two things I would appreciate assistance with.
First:
I am experiencing an issue with dimming, when I hold down or up the dimmer paddle, the amount of dimming is not going up or down.
Here is the on function for one of the lights. Does the dimmer's function need to be something other than on? Diagnostics is at the bottom of this post.
Second:
I want to have it so that all dimmers have the LED colors behave the same way. With one click = white, two click = blue, three click = red, four click = yellow.
Is their an easy way to do this instead of having to do an if statement event for each dimmer's scene? Something like this:
if all dimmers status = scene 0 then set color = white
or if any device status = scene 02 then set color = blue
or if any device status = scene 03 then set color = red
or if any device status = scene 04 then set color = yellow
Thanks in advance for your time and expertise everyone. Please stay safe and healthy.
Gary
Diagnostic Info:
HomeSeer Version: HS3 Pro Edition 3.0.0.548
Operating System: Microsoft Windows Server 2016 Standard - Server
System Uptime: 2 Days 1 Hour 42 Minutes 0 Seconds
IP Address: 192.168.1.11
Number of Devices: 319
Number of Events: 109
Available Threads: 1022
HSTouch Enabled: False
Event Threads: 0
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed:
Enabled Plug-Ins
1.0.7301.4588: HS-WD200 Idle Light Colors
0.0.0.48: Pushover 3P
3.0.2.0: Z-Wave
I have completed the installation of 120 or so WD200's in a clients home. I have two things I would appreciate assistance with.
First:
I am experiencing an issue with dimming, when I hold down or up the dimmer paddle, the amount of dimming is not going up or down.
Here is the on function for one of the lights. Does the dimmer's function need to be something other than on? Diagnostics is at the bottom of this post.
Second:
I want to have it so that all dimmers have the LED colors behave the same way. With one click = white, two click = blue, three click = red, four click = yellow.
Is their an easy way to do this instead of having to do an if statement event for each dimmer's scene? Something like this:
if all dimmers status = scene 0 then set color = white
or if any device status = scene 02 then set color = blue
or if any device status = scene 03 then set color = red
or if any device status = scene 04 then set color = yellow
Thanks in advance for your time and expertise everyone. Please stay safe and healthy.
Gary
Diagnostic Info:
HomeSeer Version: HS3 Pro Edition 3.0.0.548
Operating System: Microsoft Windows Server 2016 Standard - Server
System Uptime: 2 Days 1 Hour 42 Minutes 0 Seconds
IP Address: 192.168.1.11
Number of Devices: 319
Number of Events: 109
Available Threads: 1022
HSTouch Enabled: False
Event Threads: 0
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed:
Enabled Plug-Ins
1.0.7301.4588: HS-WD200 Idle Light Colors
0.0.0.48: Pushover 3P
3.0.2.0: Z-Wave
Comment