Announcement

Collapse
No announcement yet.

Double entries

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Double entries

    This is the second device this has happened to. The first one was the Qubino switch with temp sensor. The temp sensor gets recorded twice.
    Now the Aeotec energy meter shows two entries for each variable. That's 16 entries where there should be 8.

    The common denominator is either HS (this happens under HS3 and HS4) or the z-wave PI. Besides not logging at all, what would be the best way to get this resolved?

    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central kW Hours 2 Set to 2.526 (2.526 kW Hours)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central kW Hours 2 Set to 2.526 (2.526 kW Hours)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central kW Hours 1 Set to 3.307 (3.307 kW Hours)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central kW Hours 1 Set to 3.307 (3.307 kW Hours)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central Watts 2 Set to 166.88 (166.88 Watts)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central Watts 2 Set to 166.88 (166.88 Watts)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central Watts 1 Set to 396.861 (396.861 Watts)
    7/09/2020 03:53:47 Legacy-Plugin Z-Wave Device: Controls Command Central Watts 1 Set to 396.861 (396.861 Watts)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Amperes 2 Set to 1.686 (1.686 Amperes)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Amperes 2 Set to 1.686 (1.686 Amperes)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Amperes 1 Set to 3.856 (3.856 Amperes)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Amperes 1 Set to 3.856 (3.856 Amperes)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Volts 2 Set to 124.449 (124.449 Volts)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Volts 2 Set to 124.449 (124.449 Volts)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Volts 1 Set to 124.449 (124.449 Volts)
    7/09/2020 03:53:41 Legacy-Plugin Z-Wave Device: Controls Command Central Volts 1 Set to 124.449 (124.449 Volts)

Working...
X