Hi All,
I have been getting a strange behavior on a GE in-wall Z-Wave outlet that controls a hydronic heater fan. It is supposed to turn on when the thermostat calls for heat in my garage. For the last few months it has been hit or miss and when I catch it not working I command it on then it works for awhile then repeat.
I suspected the outlet to be the culprit so tonight I replaced it with a brand new one I had in my box of goodies but the new one (exact model) will include but immediately say "Unknown Status" and it is a dead node. I have repeatedly excluded and included the device to no avail. All other nodes work including the devices on my other controllers.
I am at a lost and now i am not sure that this is a device issue but do not know what else to suspect as the rest of the system is working as it should.
Here is what I get on the log. Did this three times without any response from device.
Anyone run into this before and what should I be looking at next?
My system is HS3 on a 2016 Windows Server, 3 controllers, 230+ devices
I have been getting a strange behavior on a GE in-wall Z-Wave outlet that controls a hydronic heater fan. It is supposed to turn on when the thermostat calls for heat in my garage. For the last few months it has been hit or miss and when I catch it not working I command it on then it works for awhile then repeat.
I suspected the outlet to be the culprit so tonight I replaced it with a brand new one I had in my box of goodies but the new one (exact model) will include but immediately say "Unknown Status" and it is a dead node. I have repeatedly excluded and included the device to no avail. All other nodes work including the devices on my other controllers.
I am at a lost and now i am not sure that this is a device issue but do not know what else to suspect as the rest of the system is working as it should.
Here is what I get on the log. Did this three times without any response from device.
Dec-01 6:24:50 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:24:45 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:22:32 PM | Z-Wave | Getting association information for Node 32 Z-Wave Sigma Switch |
Dec-01 6:22:27 PM | Z-Wave | Getting association information for Node 32 Z-Wave Sigma Switch |
Dec-01 6:22:12 PM | Z-Wave | Getting association information for node 32 |
Dec-01 6:21:56 PM | Z-Wave | Node 32 is a Z-Wave Plus node. Retrieving ZWPlus Info... |
Dec-01 6:21:56 PM | Z-Wave Warning | Error getting version information for node 32, Send failed. |
Dec-01 6:21:22 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:21:17 PM | Z-Wave Warning | Failed to get Association Group Count information for device Node 32 Z-Wave Sigma Switch |
Dec-01 6:21:12 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:21:07 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:21:02 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:20:57 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:20:52 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:20:47 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:20:42 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:20:41 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:41 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:40 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:40 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:40 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:40 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:39 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:20:37 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to On (255) by/from: CAPI Control Handler |
Dec-01 6:16:21 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:16:16 PM | Z-Wave Error | Failed sending Z-Wave command to device: Node 32 Z-Wave Sigma Switch |
Dec-01 6:16:14 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to On (255) by/from: CAPI Control Handler |
Dec-01 6:16:10 PM | Device Control | Device: Node 32 Z-Wave Sigma Switch to Off (0) by/from: CAPI Control Handler |
Dec-01 6:15:50 PM | Z-Wave | Getting association information for Node 32 Z-Wave Sigma Switch |
Dec-01 6:15:45 PM | Z-Wave | Getting association information for Node 32 Z-Wave Sigma Switch |
Dec-01 6:15:14 PM | Z-Wave | Node 32 is a Z-Wave Plus node. Retrieving ZWPlus Info... |
Dec-01 6:15:14 PM | Z-Wave Warning | Error getting version information for node 32, Send failed. |
Dec-01 6:14:28 PM | Z-Wave | Done. Node 32 Added. |
My system is HS3 on a 2016 Windows Server, 3 controllers, 230+ devices