Announcement

Collapse
No announcement yet.

Small tings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Small tings

    Hi great plugin :-)
    Connected my ipace.
    Seem like there are some data that do not update or a wrong hope it is ok I report it here:

    In homeseer I get this:
    State Of charge rate 0,8 %/hr

    on my app it is 8%/hr (and that is correct)

    -----------

    Latitude 0,000000000000000° Yesterday 16.51.21
    Longitude 0,000000000000000° Yesterday 16.51.21
    Speed 0 km/hr Yesterday 16.51.21
    Heading 0,00°

    The above data does not seem to update at all.
    Best,
    Jakob Sand, I automate everything!

    #2
    Hi! Off course it is ok to report here, this is the forum for the JLR plugin.

    The location is not working on the I-Pace. I have seen it working on other JLR models but not the I-Pace. The data is in the API but it's not being used for some reason. For location data, you can use the Trips data which does contain the last known location. Unfortunately there is no live location data available for the I-Pace.

    I will check the SOC rate next time I charge the car to see if there is a calculation error.
    stefxx

    Comment


      #3
      I believe I have found the issue. Both "State of charge rate" and "Charging rate" are currently incorrect.

      Can you test beta 4.0.8.1 to see if that fixes it for you? If so, I will publish a release version next week.
      stefxx

      Comment


        #4
        Will try.
        Do you think you could also make a notification if password/login is failing and maybe even a device that shows connection and last updated status?
        I punched in the wrong PW and god locked out of JLRs website for 5 mins on all apps.
        Best,
        Jakob Sand, I automate everything!

        Comment


          #5
          The "Vehicle status poll frequency (default 15)" what unit is that? Seconds or Minutes?
          Same goes for all the other setitngs.

          Best,
          Jakob Sand, I automate everything!

          Comment


            #6
            Time is in seconds. Will make that more clear in future versions.

            I will also look at failed logins, time permitting.

            Thanks!
            stefxx

            Comment


              #7
              Seems like the beta crashes. Will try to revert to the gold
              Best,
              Jakob Sand, I automate everything!

              Comment


                #8
                Seems like the plugin is getting locked out:
                GetToken failed: The remote server returned an error: (423) Locked. - System.Net.HttpWebResponse




                Best,
                Jakob Sand, I automate everything!

                Comment


                  #9
                  Beta works for me. Any error message?
                  stefxx

                  Comment


                    #10
                    Installed version .9
                    Now nothing works...
                    It just keep crashing:

                    10/03/2022 20.50.37 HomeSeer Info Plugin JaguarLandRover with instance Jaguar Land Rover has connected. IP:127.0.0.1:60797
                    10/03/2022 20.50.36 HomeSeer Warning I/O interface Jaguar Land Rover is down, executable is not running, restarting ...
                    10/03/2022 20.50.19 HomeSeer Info Plugin Jaguar Land Rover with ID: JaguarLandRover and Instance: has disconnected
                    10/03/2022 20.50.06 HomeSeer Starting Plug-In Plugin Jaguar Land Rover started successfully in 22 milliseconds
                    10/03/2022 20.50.06 Jaguar Land Rover Info Initialization of Jaguar Land Rover version 4.0.9.0 complete
                    10/03/2022 20.50.06 HomeSeer Starting Plug-In Initializing plugin Jaguar Land Rover ...
                    10/03/2022 20.50.06 HomeSeer Starting Plug-In Jaguar Land Rover loaded in 15087 milliseconds
                    10/03/2022 20.49.52 HomeSeer Info Plugin JaguarLandRover with instance Jaguar Land Rover has connected. IP:127.0.0.1:60773
                    10/03/2022 20.49.51 HomeSeer Warning I/O interface Jaguar Land Rover is down, executable is not running, restarting ...
                    10/03/2022 20.49.33 HomeSeer Info Plugin Jaguar Land Rover with ID: JaguarLandRover and Instance: has disconnected
                    10/03/2022 20.49.21 HomeSeer Starting Plug-In Plugin Jaguar Land Rover started successfully in 22 milliseconds
                    10/03/2022 20.49.21 Jaguar Land Rover Info Initialization of Jaguar Land Rover version 4.0.9.0 complete
                    10/03/2022 20.49.21 HomeSeer Starting Plug-In Initializing plugin Jaguar Land Rover ...
                    10/03/2022 20.49.21 HomeSeer Starting Plug-In Jaguar Land Rover loaded in 15033 milliseconds
                    10/03/2022 20.49.06 HomeSeer Info Plugin JaguarLandRover with instance Jaguar Land Rover has connected. IP:127.0.0.1:60760
                    10/03/2022 20.49.05 HomeSeer Warning I/O interface Jaguar Land Rover is down, executable is not running, restarting ...
                    10/03/2022 20.48.48 HomeSeer Info Plugin Jaguar Land Rover with ID: JaguarLandRover and Instance: has disconnected
                    10/03/2022 20.48.35 HomeSeer Starting Plug-In Plugin Jaguar Land Rover started successfully in 21 milliseconds
                    10/03/2022 20.48.35 Jaguar Land Rover Info Initialization of Jaguar Land Rover version 4.0.9.0 complete

                    Best,
                    Jakob Sand, I automate everything!

                    Comment


                      #11
                      Sorry, in the 4.0.9.0 release version I added a reference that is only available in HS4 4.2.9.0 or above.

                      So you can upgrade to the new HS4 version here: https://forums.homeseer.com/forum/hs...0-is-available

                      Or install the JLR 4.0.9.1 beta plugin that removes this reference and works on your current version of HS4.

                      Thanks!
                      stefxx

                      Comment


                        #12
                        will upgrade. Thx
                        Best,
                        Jakob Sand, I automate everything!

                        Comment

                        Working...
                        X