Announcement

Collapse
No announcement yet.

door window sensors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    door window sensors

    So these are what I have.. i have a possible defective one. i replaced the battery but it still is giving an error as im not home to give the error. but biggest thing is the plastic back broke where screws mount it so dont mind replacing with the same one...

    but what wireless door/window yous guys using?

    https://www.surveillance-video.com/s...-29-319-5.html
    HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

    HS - HS3 Pro Edition 3.0.0.435

    Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

    Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

    #2
    Originally posted by TeleFragger View Post
    So these are what I have.. i have a possible defective one. i replaced the battery but it still is giving an error as im not home to give the error. but biggest thing is the plastic back broke where screws mount it so dont mind replacing with the same one...

    but what wireless door/window yous guys using?

    https://www.surveillance-video.com/s...-29-319-5.html
    What error?
    Sure it's not a tamper alarm? The Tamper switches on these corrode after so many years and they're a pain to get working again. I just jumper them out.

    Z

    Comment


      #3
      Originally posted by vasrc View Post

      What error?
      Sure it's not a tamper alarm? The Tamper switches on these corrode after so many years and they're a pain to get working again. I just jumper them out.

      Z
      thx.. i yanked powwr and battery. let it reset. powered on. set date and time. im in!!!!
      HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

      HS - HS3 Pro Edition 3.0.0.435

      Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

      Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

      Comment


        #4
        Yes, I had the same issue with the tamper. If it's the issue, it will come back. I bought a bunch of Interlogix NX-650's and just replace as needed.

        Comment


          #5
          Originally posted by mattm55 View Post
          Yes, I had the same issue with the tamper. If it's the issue, it will come back. I bought a bunch of Interlogix NX-650's and just replace as needed.
          yeah it didnt say Tamper.. it said Supervisory and wouldnt go away. Still may buy one as the back where the screws hold it to the sliding glass is broken and barely held on at this point..

          HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

          HS - HS3 Pro Edition 3.0.0.435

          Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

          Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

          Comment


            #6
            Supervisory from my experience was a problem with bad caps after a battery replacement. Another reason I bought a bulk amount. I think you could tell by the color of the caps if I remember correctly. My experience with the sensors is good except for the occasional Tamper, Supervisory(battery low or changes) and 1 completely dead sensor. I even had a hardwired switch go bad a few months ago.

            Comment


              #7
              Originally posted by mattm55 View Post
              Supervisory from my experience was a problem with bad caps after a battery replacement. Another reason I bought a bulk amount. I think you could tell by the color of the caps if I remember correctly. My experience with the sensors is good except for the occasional Tamper, Supervisory(battery low or changes) and 1 completely dead sensor. I even had a hardwired switch go bad a few months ago.
              yeah i gotta order one... this one went and tripped again. plus as i stated, the back is broken and its hard to mount now.
              HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

              HS - HS3 Pro Edition 3.0.0.435

              Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

              Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

              Comment


                #8
                so you have listed that you bought nx-650's... are the nx-656 just a newer model?
                HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

                HS - HS3 Pro Edition 3.0.0.435

                Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

                Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

                Comment


                  #9
                  No. That looks like its a "glass" sensor and is different. The NX-650's (window frame mount) are around $15-$25 ea. I think I bought 20 from a fleaBay sale for something like $150. My NX-650's are backed up by motions so glass breakage isn't my worry. I also have 360 coverage of IP cams. YMMV

                  Comment


                    #10
                    Originally posted by mattm55 View Post
                    No. That looks like its a "glass" sensor and is different. The NX-650's (window frame mount) are around $15-$25 ea. I think I bought 20 from a fleaBay sale for something like $150. My NX-650's are backed up by motions so glass breakage isn't my worry. I also have 360 coverage of IP cams. YMMV
                    crap... bought them... oh well... LOL
                    HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

                    HS - HS3 Pro Edition 3.0.0.435

                    Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

                    Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

                    Comment

                    Working...
                    X