Announcement

Collapse
No announcement yet.

Concord Plugin not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Concord Plugin not working

    Hello,
    I've been using the Concord plugin 3.0.1.11 for over 8 months without any issues. Today, I updated the plugin to 3.1.13.2 and all problems started. It is not connecting to my panel, it displays "Comm Port Initialized. NOT Connected to Concord Panel" in the plugin configuration when I click connect. Tried many times restarting the server, the Concord security panel and the plugin, same problem, and when I click on Retrieve Zones, it creates a new set of incomplete devices, and says no zones found.

    I restored my Homeseer to my previous backup to get the 3.0.1.11 plugin, but now same problem. Cannot get this to work. Been on this all day long.

    Here is the log on startup:
    11/12/2015 5:09:47 PM ~!~Info~!~Plugin CONCORD has connected. IP:127.0.0.1:49256
    11/12/2015 5:09:47 PM ~!~CONCORD~!~---------------------------------------------------
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Initializing Concord, Vers:3.0.1.11
    11/12/2015 5:09:47 PM ~!~CONCORD Info~!~Initializing Concord DB
    11/12/2015 5:09:47 PM ~!~CONCORD Error~!~An unexpected error occurred in the InitConcord() function/subroutine: [System.TypeInitializationException: The type initializer for 'HSPI_CONCORD.dbModule' threw an exception. ---> System.DllNotFoundException: Unable to load DLL 'sqlite3': The specified module could not be found. (Exception from HRESULT: 0x8007007E) at System.Data.SQLite.UnsafeNativeMethods.sqlite3_config_none(S QLiteConfigOpsEnum op) at System.Data.SQLite.SQLite3.StaticIsInitialized() at System.Data.SQLite.SQLiteLog.Initialize() at System.Data.SQLite.SQLiteConnection..ctor(String connectionString, Boolean parseViaFramework) at System.Data.SQLite.SQLiteConnection..ctor() at HSPI_CONCORD.dbModule..cctor() --- End of inner exception stack trace --- at HSPI_CONCORD.dbModule.InitDB() at HSPI_CONCORD.devModule.InitConcord()]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Control]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Configuration]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Configuration]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [LogPage]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [/html/CONCORD/Concord_help.htm]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [HelpPage]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Check/Init Triggers
    11/12/2015 5:09:47 PM ~!~CONCORD~!~---------------------------------------------------
    11/12/2015 5:09:47 PM ~!~Plug-In~!~Finished initializing plug-in CONCORD
    11/12/2015 5:09:47 PM ~!~Info~!~Plugin HSTouch Server has connected. IP:127.0.0.1:49258
    11/12/2015 5:09:47 PM ~!~CONCORD Error~!~Error in PluginProc: Value cannot be null.Parameter name: source

    Here is my configuration:
    Current Date/Time: 11/12/2015 5:16:46 PM
    HomeSeer Version: HS3 Pro Edition 3.0.0.208
    Operating System: Microsoft Windows 7 Home Premium - Work Station
    System Uptime: 0 Days 0 Hours 7 Minutes 8 Seconds
    Number of Devices: 109
    Number of Events: 194

    Enabled Plug-Ins
    3.0.0.28: ADIO-100
    3.0.1.11: CONCORD
    3.0.0.75: HSTouch Server
    3.0.1.25: Z-Wave

    Attached are the screen shots with the devices when it "worked" and the new devices it creates that are not working. As you can see, the devices being created are individual vs together and these are zones with no assigned devices to them.

    Any help will be appreciated!
    Attached Files

    #2
    Originally posted by Varouj View Post
    Hello,
    I've been using the Concord plugin 3.0.1.11 for over 8 months without any issues. Today, I updated the plugin to 3.1.13.2 and all problems started. It is not connecting to my panel, it displays "Comm Port Initialized. NOT Connected to Concord Panel" in the plugin configuration when I click connect. Tried many times restarting the server, the Concord security panel and the plugin, same problem, and when I click on Retrieve Zones, it creates a new set of incomplete devices, and says no zones found.

    I restored my Homeseer to my previous backup to get the 3.0.1.11 plugin, but now same problem. Cannot get this to work. Been on this all day long.

    Here is the log on startup:
    11/12/2015 5:09:47 PM ~!~Info~!~Plugin CONCORD has connected. IP:127.0.0.1:49256
    11/12/2015 5:09:47 PM ~!~CONCORD~!~---------------------------------------------------
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Initializing Concord, Vers:3.0.1.11
    11/12/2015 5:09:47 PM ~!~CONCORD Info~!~Initializing Concord DB
    11/12/2015 5:09:47 PM ~!~CONCORD Error~!~An unexpected error occurred in the InitConcord() function/subroutine: [System.TypeInitializationException: The type initializer for 'HSPI_CONCORD.dbModule' threw an exception. ---> System.DllNotFoundException: Unable to load DLL 'sqlite3': The specified module could not be found. (Exception from HRESULT: 0x8007007E) at System.Data.SQLite.UnsafeNativeMethods.sqlite3_config_none(S QLiteConfigOpsEnum op) at System.Data.SQLite.SQLite3.StaticIsInitialized() at System.Data.SQLite.SQLiteLog.Initialize() at System.Data.SQLite.SQLiteConnection..ctor(String connectionString, Boolean parseViaFramework) at System.Data.SQLite.SQLiteConnection..ctor() at HSPI_CONCORD.dbModule..cctor() --- End of inner exception stack trace --- at HSPI_CONCORD.dbModule.InitDB() at HSPI_CONCORD.devModule.InitConcord()]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Control]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Configuration]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [Configuration]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [LogPage]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [/html/CONCORD/Concord_help.htm]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Registering webpage [HelpPage]
    11/12/2015 5:09:47 PM ~!~CONCORD~!~Check/Init Triggers
    11/12/2015 5:09:47 PM ~!~CONCORD~!~---------------------------------------------------
    11/12/2015 5:09:47 PM ~!~Plug-In~!~Finished initializing plug-in CONCORD
    11/12/2015 5:09:47 PM ~!~Info~!~Plugin HSTouch Server has connected. IP:127.0.0.1:49258
    11/12/2015 5:09:47 PM ~!~CONCORD Error~!~Error in PluginProc: Value cannot be null.Parameter name: source

    Here is my configuration:
    Current Date/Time: 11/12/2015 5:16:46 PM
    HomeSeer Version: HS3 Pro Edition 3.0.0.208
    Operating System: Microsoft Windows 7 Home Premium - Work Station
    System Uptime: 0 Days 0 Hours 7 Minutes 8 Seconds
    Number of Devices: 109
    Number of Events: 194

    Enabled Plug-Ins
    3.0.0.28: ADIO-100
    3.0.1.11: CONCORD
    3.0.0.75: HSTouch Server
    3.0.1.25: Z-Wave

    Attached are the screen shots with the devices when it "worked" and the new devices it creates that are not working. As you can see, the devices being created are individual vs together and these are zones with no assigned devices to them.

    Any help will be appreciated!
    Stop the plugin, and then copy your System.Data.SQLite.dll from the /bin directory to the /bin/CONCORD directory and start the plugin again.

    Send me your HS startup log for the Concord plugin then.
    I'll PM you my email address.

    The updated plugin should have done all of that for you, but it may have missed a step due to permissions.

    Z

    Comment


      #3
      just had the same issue... sorry but glad you posted this...

      I renamed my old hs install folder.. installed .218 .. (not in sig yet but old is)

      and concord plugin failed....
      HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

      HS - HS3 Pro Edition 3.0.0.435

      Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

      Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

      Comment


        #4
        Originally posted by TeleFragger View Post
        just had the same issue... sorry but glad you posted this...

        I renamed my old hs install folder.. installed .218 .. (not in sig yet but old is)

        and concord plugin failed....
        Turn off existing plugin, then reinstall.
        Post the HS log of the Concord plugin startup if that doesn't resolve the issue.

        Z

        Comment


          #5
          Originally posted by vasrc View Post
          Turn off existing plugin, then reinstall.
          Post the HS log of the Concord plugin startup if that doesn't resolve the issue.

          Z
          thx.. I was just posting saying it fixed my issue...

          thx!!!!
          HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

          HS - HS3 Pro Edition 3.0.0.435

          Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

          Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

          Comment

          Working...
          X