Hi, I just purchased and installed the EnvisaLink 3 with HS3 on Windows.
Installation went well, all seems to be working as expected, zones are activating etc as I open & close doors, etc...
Here are my questions in regards to the attached screenshot:
1. What exactly is "Arm Zero Entry Delay" Does it mean:
Armed Stay with Zero Entry Delay, or
Armed Away with Zero Entry Delay, or
does it add Zero Entry Delay to a previously set 'Armed Stay' command ?
I'm scared to try it. Don't want to set off the alarm if I'm inside and its arms as away when the motion sensor sees me.
2. Why does the 'User Access' device have a '? Unknown' as the status? The password to the Envisalink 3 is set properly, and the zones show correct status as things change, therefore the access seems to work properly? Is there something wrong it's trying to tell me? There's no errors in the log and I've got logging set to 'Error'.
Other Questions not related to the screenshot:
3. Is there a way to set a static IP address in the Envisalink 3 without re-configuring my DHCP server to server only the IP address I want it to have?
4. My Envisalink 3 has Firmware Version: 01.07.88. Is there a later version? Didn't see anything in the support section of the Eyezon website related to software, or upgrades. I'm wondering if an upgrade will solve the IP addressing issue.
5. I'm not exactly sure of the benefit of having the alarm users tied to the HomeSeer users? Whats the benefit? Is there any additional functionality supplied by doing that?
Thanks in advance for the assistance,
Victor
Installation went well, all seems to be working as expected, zones are activating etc as I open & close doors, etc...
Here are my questions in regards to the attached screenshot:
1. What exactly is "Arm Zero Entry Delay" Does it mean:
Armed Stay with Zero Entry Delay, or
Armed Away with Zero Entry Delay, or
does it add Zero Entry Delay to a previously set 'Armed Stay' command ?
I'm scared to try it. Don't want to set off the alarm if I'm inside and its arms as away when the motion sensor sees me.
2. Why does the 'User Access' device have a '? Unknown' as the status? The password to the Envisalink 3 is set properly, and the zones show correct status as things change, therefore the access seems to work properly? Is there something wrong it's trying to tell me? There's no errors in the log and I've got logging set to 'Error'.
Other Questions not related to the screenshot:
3. Is there a way to set a static IP address in the Envisalink 3 without re-configuring my DHCP server to server only the IP address I want it to have?
4. My Envisalink 3 has Firmware Version: 01.07.88. Is there a later version? Didn't see anything in the support section of the Eyezon website related to software, or upgrades. I'm wondering if an upgrade will solve the IP addressing issue.
5. I'm not exactly sure of the benefit of having the alarm users tied to the HomeSeer users? Whats the benefit? Is there any additional functionality supplied by doing that?
Thanks in advance for the assistance,
Victor
Comment