Announcement

Collapse
No announcement yet.

Goto Partition 0 & 1 loop

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Goto Partition 0 & 1 loop

    Mark,

    A secondary issue to the custom message thread, I have noticed something goes bonkers and I start getting this repeating series of entries in the log. Disarming both partitions seems to stop/clear the condition/behaviour. I toggled debug off so in the log snippet you'll have debug code and then the last bit is without debug. Maybe more of alarm issue than plug-in.

    -r


    Sep-22 1:59:40 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:38 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:38 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:36 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:33 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:33 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:31 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:29 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:29 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:27 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:24 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:24 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:22 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:20 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:20 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:18 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:16 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:16 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:14 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:11 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:11 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:09 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:07 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:07 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:05 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:59:03 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:59:03 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:59:01 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:58:58 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:58:58 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:58:56 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:58:54 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:58:54 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:58:52 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:58:50 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:58:50 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:58:48 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:58:45 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:58:45 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:58:43 PM Vista Alarm Sending Display Faults command to alarm
    Sep-22 1:58:41 PM Vista Alarm Sending Goto Partition 1 command to alarm
    Sep-22 1:58:41 PM Vista Alarm Sending Goto Partition 0 command to alarm
    Sep-22 1:58:39 PM Vista Alarm Sending *
    Sep-22 1:58:39 PM Vista Alarm Settings page submitted
    Sep-22 1:58:37 PM Vista Alarm Sending [code]+*1
    Sep-22 1:58:36 PM Vista Alarm !Sending.done
    Sep-22 1:58:36 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
    Sep-22 1:58:36 PM Vista Alarm Processing msg on Partition 2
    Sep-22 1:58:36 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
    Sep-22 1:58:36 PM Vista Alarm [0001010111000000----],1c0,[f740000000c001002a0200000d0000],"Log-on to P1 Part. 1 Complete"
    Sep-22 1:58:36 PM Vista Alarm Ignoring Message
    Sep-22 1:58:36 PM Vista Alarm MessageKey=Log-on to P1 Part. 1 Complete 0
    Sep-22 1:58:36 PM Vista Alarm !Sending.done
    Sep-22 1:58:36 PM Vista Alarm [0001000111000000----],002,[f74f0400100280002a020000000000],"ALARM 02 DELAYEDENTRY DOOR "
    Sep-22 1:58:36 PM Vista Alarm Processing msg on Partition 1
    Sep-22 1:58:36 PM Vista Alarm MessageKey=FAULT-2
    Sep-22 1:58:36 PM Vista Alarm !Sending.done
    Sep-22 1:58:36 PM Vista Alarm !Sending.done
    Sep-22 1:58:36 PM Vista Alarm [0001000110000000----],0c0,[f74f040010c0800c28020000000000],"P1 DISARMED ZONES IN ALARM "
    Sep-22 1:58:36 PM Vista Alarm Processing msg on Partition 1
    Sep-22 1:58:36 PM Vista Alarm MessageKey=P1 DISARMED ZONES IN ALARM 1
    Sep-22 1:58:36 PM Vista Alarm Sending [code]+*0
    Sep-22 1:58:34 PM Vista Alarm Sending *
    Sep-22 1:58:32 PM Vista Alarm Sending [code]+*1
    Sep-22 1:58:32 PM Vista Alarm !Sending.done
    Sep-22 1:58:32 PM Vista Alarm [0001010111000000----],0c0,[f740000000c001002a020000000000],"Log-on to P1 Part. 1 Complete"
    Sep-22 1:58:32 PM Vista Alarm Ignoring Message
    Sep-22 1:58:32 PM Vista Alarm MessageKey=Log-on to P1 Part. 1 Complete 0
    Sep-22 1:58:32 PM Vista Alarm [0001010111000000----],0c0,[f740000000c001002a020000000000],"Log-on to P1 Part. 1 Complete"
    Sep-22 1:58:32 PM Vista Alarm Ignoring Message
    Sep-22 1:58:32 PM Vista Alarm MessageKey=Log-on to P1 Part. 1 Complete 0
    Sep-22 1:58:32 PM Vista Alarm !Sending.done
    Sep-22 1:58:32 PM Vista Alarm [0101000110000000----],116,[f71000002016800c2c0200000d0000],"P2 ARMED AWAY ** ALL SECURE **"
    Sep-22 1:58:32 PM Vista Alarm Processing msg on Partition 2
    Sep-22 1:58:32 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
    Sep-22 1:58:32 PM Vista Alarm !Sending.done
    -Rick

    #2
    what vista panel do you have?

    and what plugin version were you running prior to upgrading to .33?
    Mark

    HS3 Pro 3.0.0.534
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
    Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

    Comment


      #3
      Vista 40, not sure I can answer the versions question. My backup NAS is offline and I don't know why yet.
      -Rick

      Comment


        #4
        with a vista 40, the plugin is trying to get the panel to display the faulted zones when it sees a panel message that contains "ZONES FAULTED".

        Can you enable debug mode and see if you capture a log when the plugin has trouble getting the panel to display the faults? it would be around a plugin msg like the following:

        Sep-22 1:59:36 PM Vista Alarm Sending Display Faults command to alarm
        Mark

        HS3 Pro 3.0.0.534
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
        Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

        Comment


          #5
          Mark,

          Log attached. Arm the alarm, upon faulting a zone, allow the alarm to activate siren, then enter disarm code. I did take the plug-in out of debugging mode after capturing all of the normal dialog from plugin to the endless loop.

          -r
          Attached Files
          -Rick

          Comment


            #6
            do you have the Vista 40 selected within the plugin?

            what is the vistamodel= in the [general] section of the vistaalarm.ini?
            Mark

            HS3 Pro 3.0.0.534
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
            Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

            Comment


              #7
              Attached Files
              -Rick

              Comment


                #8
                lets just work on the goto 0 & 1 issue on this thread and hold off on the other issue until later

                does your vista 40 display panel messages like the following when it asks you to Hit * to display faults? if not, what do they look like

                3/9/2012 1:44:15 PM Vista Alarm [000100011000--------],004,[f70f0c001004800c28020000000000],"****DISARMED****Hit * for faults"
                3/9/2012 1:46:04 PM Vista Alarm [000100011000--------],011,[f70f0c001011800c28020000000000],"****DISARMED**** ZONES FAULTED "
                Mark

                HS3 Pro 3.0.0.534
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                Comment


                  #9
                  Not really certain to what condition you want the panel in. In this case here are the messages with just a fault and the alarm is disarmed.


                  Sep-24 2:01:41 PM Vista Alarm [0001000110000000----],002,[f74f04001002800028020000000000],"FAULT 02 DELAYEDENTRY DOOR "
                  Sep-24 2:01:41 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:41 PM Vista Alarm MessageKey=FAULT-2
                  Sep-24 2:01:39 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:39 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:39 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  Sep-24 2:01:35 PM Vista Alarm [0001000110000000----],102,[f74f04001002800c280200000d0000],"P1 DISARMED ZONES FAULTED "
                  Sep-24 2:01:35 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:35 PM Vista Alarm MessageKey=P1 DISARMED ZONES FAULTED 1
                  Sep-24 2:01:33 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:33 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:33 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  Sep-24 2:01:29 PM Vista Alarm [0001000110000000----],002,[f74f04001002800028020000000000],"FAULT 02 DELAYEDENTRY DOOR "
                  Sep-24 2:01:29 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:29 PM Vista Alarm MessageKey=FAULT-2
                  Sep-24 2:01:27 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:27 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:27 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  Sep-24 2:01:23 PM Vista Alarm [0001000110000000----],002,[f74f04001002800c28020000000000],"P1 DISARMED ZONES FAULTED "
                  Sep-24 2:01:23 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:23 PM Vista Alarm MessageKey=P1 DISARMED ZONES FAULTED 1
                  Sep-24 2:01:21 PM Vista Alarm [0101000110000000----],116,[f71000002016800c2c0200000d0000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:21 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:21 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  Sep-24 2:01:17 PM Vista Alarm [0001000110000000----],002,[f74f04001002800028020000000000],"FAULT 02 DELAYEDENTRY DOOR "
                  Sep-24 2:01:17 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:17 PM Vista Alarm MessageKey=FAULT-2
                  Sep-24 2:01:15 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:15 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:15 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  Sep-24 2:01:11 PM Vista Alarm [0001000110000000----],002,[f74f04001002800c28020000000000],"P1 DISARMED ZONES FAULTED "
                  Sep-24 2:01:11 PM Vista Alarm Processing msg on Partition 1
                  Sep-24 2:01:11 PM Vista Alarm MessageKey=P1 DISARMED ZONES FAULTED 1
                  Sep-24 2:01:10 PM Vista Alarm Settings page submitted
                  Sep-24 2:01:09 PM Vista Alarm [0101000110000000----],016,[f71000002016800c2c020000000000],"P2 ARMED AWAY ** ALL SECURE **"
                  Sep-24 2:01:09 PM Vista Alarm Processing msg on Partition 2
                  Sep-24 2:01:09 PM Vista Alarm MessageKey=P2 ARMED AWAY ** ALL SECURE ** 2
                  -Rick

                  Comment


                    #10
                    I think this is what you are after

                    ep-24 2:34:45 PM Vista Alarm Sending [code]+*1
                    Sep-24 2:34:45 PM Vista Alarm !Sending.done
                    Sep-24 2:34:45 PM Vista Alarm !Sending.done
                    Sep-24 2:34:45 PM Vista Alarm [0001030110000000----],002,[f74f04001002030c28020000000000],"P1 DISARMED Hit * for faults"
                    Sep-24 2:34:45 PM Vista Alarm Processing msg on Partition 1
                    Sep-24 2:34:45 PM Vista Alarm MessageKey=P1 DISARMED Hit * for faults 1
                    Sep-24 2:34:45 PM Vista Alarm Sending [code]+*0
                    Sep-24 2:34:43 PM Vista Alarm Sending *
                    Sep-24 2:34:41 PM Vista Alarm Sending [code]+*1
                    -Rick

                    Comment


                      #11
                      I posted 3.0.0.34 in the beta section of the updater. please upgrade and retest according to your post #5 above.
                      Mark

                      HS3 Pro 3.0.0.534
                      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                      Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                      Comment


                        #12
                        Goto issue seems to be resolved with beta.

                        -rick
                        -Rick

                        Comment


                          #13
                          Originally posted by rmorton27 View Post
                          Goto issue seems to be resolved with beta.

                          -rick
                          thanks for reporting back. the issue was related to the 'hit * to show faults' msg. the plugin was incorrectly responding to a message and causing the Gotos.
                          Mark

                          HS3 Pro 3.0.0.534
                          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                          Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                          Comment

                          Working...
                          X