Announcement

Collapse
No announcement yet.

Vista 128bpT

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #16
    I have both the interface address and the single partition set to 18, and I can arm and disarm the system successfully from Homeseer. Just can't get the software to parse the faults (which gets displayed on the panel device in the device list).

    FWIW, I also do not have an emulate LRR checkbox.

    Comment

      #17
      Ah, did you create zone devices via the plugin? the plugin needs these hs devices to track the messages from the panel/ad2usb
      Mark

      HS3 Pro 4.2.19.5
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
      Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

      Comment

        #18
        I did. The zone devices on my keypad all start with a Z (i.e. Z1, Z2, ..., Z23), but I created all of them matched to the drop-down numbers available. See sample screenshot.
        Attached Files

        Comment

          #19
          can you redo the previous screen shot and include the hs Address column and display all the devices associated with the plugin
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment

            #20
            i saw the full pic. Zone 1 and 2 are updating. is there anything different on the Advanced tab on these devices versas the others? i dont know why the others arent updating
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment

              #21
              With debug mode on, please post a fault msg for zone 2 and zone 14. i need to see if they are different somehow
              Mark

              HS3 Pro 4.2.19.5
              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

              Comment

                #22
                Jun-07 1:25:19 PM Vista Alarm [00000301100000000A--],002,[f71700040002030028020000000000],"FAULT 002 FRONT GARAGE DOORS "
                Jun-07 1:25:19 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:19 PM Vista Alarm MessageKey=FAULT-2
                Jun-07 1:25:19 PM Vista Alarm Zone changed. Set device Vista Zone 2 to Value=Fault
                Jun-07 1:25:19 PM Vista Alarm Setting System to Faulted
                Jun-07 1:25:19 PM Vista Alarm Setting Partition 1 to Faulted
                Jun-07 1:25:17 PM Vista Alarm [10000001100000003A--],003,[f71700040003001c28020000000000],"****DISARMED**** READY TO ARM "
                Jun-07 1:25:17 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:17 PM Vista Alarm MessageKey=****DISARMED**** READY TO ARM 1
                Jun-07 1:25:17 PM Vista Alarm Setting System to Disarmed-Ready
                Jun-07 1:25:17 PM Vista Alarm Zone changed. Set device Vista Zone 2 to Value=Normal
                Jun-07 1:25:17 PM Vista Alarm Clearing all zones for Ready mode.
                Jun-07 1:25:17 PM Vista Alarm Setting Partition 1 to Disarmed-Ready
                Jun-07 1:25:16 PM Vista Alarm [00000001100000000A--],002,[f71700040002000028020000000000],"FAULT 002 FRONT GARAGE DOORS "
                Jun-07 1:25:16 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:16 PM Vista Alarm MessageKey=FAULT-2
                Jun-07 1:25:14 PM Vista Alarm [00000001100000003A--],002,[f71700040002000c28020000000000],"****DISARMED**** ZONES FAULTED "
                Jun-07 1:25:14 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:14 PM Vista Alarm MessageKey=****DISARMED**** ZONES FAULTED 1
                Jun-07 1:25:14 PM Vista Alarm [00000301100000000A--],002,[f71700040002030028020000000000],"FAULT 002 FRONT GARAGE DOORS "
                Jun-07 1:25:14 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:14 PM Vista Alarm MessageKey=FAULT-2
                Jun-07 1:25:14 PM Vista Alarm Zone changed. Set device Vista Zone 2 to Value=Fault
                Jun-07 1:25:13 PM Vista Alarm [00000001100000000A--],003,[f71700040003000028020000000000],"FAULT 003 MUD ROOM MOTION "
                Jun-07 1:25:13 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:13 PM Vista Alarm MessageKey=FAULT-3
                Jun-07 1:25:13 PM Vista Alarm Setting System to Faulted
                Jun-07 1:25:13 PM Vista Alarm Setting Partition 1 to Faulted
                Jun-07 1:25:09 PM Vista Alarm [10000001100000003A--],022,[f71700040022001c28020000000000],"****DISARMED**** READY TO ARM "
                Jun-07 1:25:09 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:09 PM Vista Alarm MessageKey=****DISARMED**** READY TO ARM 1
                Jun-07 1:25:02 PM Vista Alarm [10000001100000003A--],022,[f71700040022001c28020000000000],"****DISARMED**** READY TO ARM "
                Jun-07 1:25:02 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:25:02 PM Vista Alarm MessageKey=****DISARMED**** READY TO ARM 1
                Jun-07 1:25:02 PM Vista Alarm Setting System to Disarmed-Ready
                Jun-07 1:25:02 PM Vista Alarm Clearing all zones for Ready mode.
                Jun-07 1:25:02 PM Vista Alarm Setting Partition 1 to Disarmed-Ready
                Jun-07 1:24:58 PM Vista Alarm [00000001100000000A--],022,[f71700040022000028020000000000],"FAULT 022 FAMILYROOM MOTION "
                Jun-07 1:24:58 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:24:58 PM Vista Alarm MessageKey=FAULT-22
                Jun-07 1:24:58 PM Vista Alarm Setting System to Faulted
                Jun-07 1:24:58 PM Vista Alarm Setting Partition 1 to Faulted
                Jun-07 1:24:54 PM Vista Alarm [10000001100000003A--],014,[f71700040014001c28020000000000],"****DISARMED**** READY TO ARM "
                Jun-07 1:24:54 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:24:54 PM Vista Alarm MessageKey=****DISARMED**** READY TO ARM 1
                Jun-07 1:24:54 PM Vista Alarm Setting System to Disarmed-Ready
                Jun-07 1:24:54 PM Vista Alarm Clearing all zones for Ready mode.
                Jun-07 1:24:54 PM Vista Alarm Setting Partition 1 to Disarmed-Ready
                Jun-07 1:24:52 PM Vista Alarm [00000001100000000A--],014,[f71700040014000028020000000000],"FAULT 014 OFFICEMOTION "
                Jun-07 1:24:52 PM Vista Alarm Processing msg on Partition 1
                Jun-07 1:24:52 PM Vista Alarm MessageKey=FAULT-14
                Jun-07 1:24:52 PM Vista Alarm Setting System to Faulted
                Jun-07 1:24:52 PM Vista Alarm Setting Partition 1 to Faulted

                Comment

                  #23
                  please review the zones you created. i think created two different entries under Zone 2 (dev 787, 788). this is not supported. the plugin should have prevented this but this maybe causing the problem
                  Mark

                  HS3 Pro 4.2.19.5
                  Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                  Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                  Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                  Comment

                    #24
                    Ok. I have now deleted the two zones that had duplicates (leaving one device for each of my zones). Should that correct or should I delete the whole thing and rebuild it?

                    Comment

                      #25
                      NM. I restarted the plugin and it kicked in. It appears to be working! Thank you for all of the help!

                      Jeff.

                      Comment

                        #26
                        I spoke too soon. Triggers are only available through zone 17, leaving 18-35 off the list. Is there some limit?

                        Comment

                          #27
                          no limit. the plugin isn't loading 18-35 at startup. enable debug, and restart the plugin and see if there are any errors in the startup log. check the zone 18 device to make sure it looks like the others (see the configuration and advanced tabs)
                          Mark

                          HS3 Pro 4.2.19.5
                          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                          Comment

                            #28
                            That did it. I deleted 18 (dining room glass break sensor) and the rest loaded. I'm not sure why that's not working, there wasn't a dupe.

                            Comment

                              #29
                              Originally posted by subtle View Post
                              That did it. I deleted 18 (dining room glass break sensor) and the rest loaded. I'm not sure why that's not working, there wasn't a dupe.
                              was there an error in the startup log? if so, can you post it

                              glad you got it working
                              Mark

                              HS3 Pro 4.2.19.5
                              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                              Comment

                                #30
                                Jun-07 5:02:21 PM Vista Alarm Error: System.ArgumentException: Item has already been added. Key in dictionary: 'Dining Dining Room Glass' Key being added: 'Dining Dining Room Glass' at System.Collections.SortedList.Add (System.Object key, System.Object value) [0x00043] in <3833a6edf2074b959d3dab898627f0ac>:0 at HSPI_VistaAlarm.VistaAlarmClass.LoadZonesSorted () [0x0012b] in :0 [3.0.1.0]

                                Thank you for all the help!

                                Comment

                                Previous 1 2 template Next
                                Working...
                                X