Announcement

Collapse
No announcement yet.

Vista Alarm Zone Faults triggering events

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #16
    Here is after clearing bypasses, it has not picked up on those zones as faulted yet.

    Code:
     
8/28/2010 5:25:29 PM Vista Alarm Sending {code}+1 
8/28/2010 5:25:32 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:25:32 PM  Vista Alarm  [000101010000--------],040,[f70f00040040010c08020000000000],"****DISARMED****Hit * for faults" 
8/28/2010 5:25:32 PM  Vista Alarm  Zone changed. Set device %10 to Value=Normal 
8/28/2010 5:25:32 PM  Vista Alarm  Zone changed. Set device %18 to Value=Normal 
8/28/2010 5:25:32 PM  Vista Alarm  Updated Cleared Zones, System is Faulted 
8/28/2010 5:25:32 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:25:32 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS B " 
8/28/2010 5:25:38 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:25:38 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:25:38 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:25:38 PM  Vista Alarm  [000100010000--------],040,[f70f00040040000c08020000000000],"****DISARMED****Hit * for faults" 
8/28/2010 5:25:44 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:25:44 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:25:45 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:25:45 PM  Vista Alarm  [000100010000--------],040,[f70f00040040000c08020000000000],"****DISARMED****Hit * for faults" 
8/28/2010 5:25:52 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:25:52 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:25:53 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:25:53 PM  Vista Alarm  [000100010000--------],040,[f70f00040040000c08020000000000],"****DISARMED****Hit * for faults" 
8/28/2010 5:26:00 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:26:00 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:26:06 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:26:06 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:26:07 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:26:07 PM  Vista Alarm  [000100010000--------],040,[f70f00040040000c08020000000000],"****DISARMED****Hit * for faults"

    Comment

      #17
      i assume you have the vista 128 option selected in the plugin Config page.

      does the * key get sent if you change the vista model to the 20p option
      Mark

      HS3 Pro 4.2.19.5
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
      Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

      Comment

        #18
        Well it sent one as soon as I changed it to a 20p. But then later it did not send it. After turning off the monitor and turning it on again it still did not send the '*'.

        Code:
        8/28/2010 5:53:14 PM  Vista Alarm  Settings page submitted 
8/28/2010 5:53:14 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:53:14 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:53:20 PM  Vista Alarm  Sending * 
8/28/2010 5:53:20 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:53:20 PM  Vista Alarm  [000000010000--------],040,[f70f00040040000c08020000000000],"****DISARMED****Hit * for faults" 
8/28/2010 5:53:22 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:53:22 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:53:29 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:53:29 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:53:38 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:53:38 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:53:51 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:53:51 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:02 PM  Vista Alarm  Zone changed. Set device %18 to Value=Fault 
8/28/2010 5:54:02 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:02 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000008020000000000],"FAULT 018 LOFT WINDOW " 
8/28/2010 5:54:04 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:04 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:09 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:09 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000c08020000000000],"****DISARMED**** ZONES FAULTED " 
8/28/2010 5:54:11 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:11 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:17 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:17 PM  Vista Alarm  [000000010000--------],004,[f70f00040004000008020000000000],"FAULT 004 HOUSE KITCHEN DOOR " 
8/28/2010 5:54:17 PM  Vista Alarm  Zone changed. Set device %18 to Value=Normal 
8/28/2010 5:54:17 PM  Vista Alarm  Updated Cleared Zones, System is Faulted 
8/28/2010 5:54:20 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:20 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:27 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:27 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:32 PM  Vista Alarm  Zone changed. Set device %18 to Value=Fault 
8/28/2010 5:54:32 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:32 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000008020000000000],"FAULT 018 LOFT WINDOW " 
8/28/2010 5:54:34 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:34 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:39 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:39 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000c08020000000000],"****DISARMED**** ZONES FAULTED " 
8/28/2010 5:54:41 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:41 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:46 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:54:46 PM  Vista Alarm  [000000010000--------],004,[f70f00040004000008020000000000],"FAULT 004 HOUSE KITCHEN DOOR " 
8/28/2010 5:54:48 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:48 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:54:55 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:54:55 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:55:08 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:55:08 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000c08020000000000],"****DISARMED**** ZONES FAULTED " 
8/28/2010 5:55:08 PM  Vista Alarm  Zone changed. Set device %18 to Value=Normal 
8/28/2010 5:55:08 PM  Vista Alarm  Updated Cleared Zones, System is Faulted 
8/28/2010 5:55:14 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:55:14 PM  Vista Alarm  [000000010000--------],004,[f70f00040004000008020000000000],"FAULT 004 HOUSE KITCHEN DOOR " 
8/28/2010 5:55:18 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:55:18 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:55:20 PM  Vista Alarm  Closed COM port 8 
8/28/2010 5:55:20 PM  Vista Alarm  Monitor terminated... 
8/28/2010 5:55:23 PM  Vista Alarm  Opened COM port 8 
8/28/2010 5:55:23 PM  Vista Alarm  Sent cmd: V 
8/28/2010 5:55:23 PM  Vista Alarm  Found the AD2USB on COM port 8 running firmware version V2.1f.0d 
8/28/2010 5:55:23 PM  Vista Alarm  Monitor started... 
8/28/2010 5:55:25 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:55:25 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:55:32 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:55:32 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N " 
8/28/2010 5:55:36 PM  Vista Alarm  Processing msg on Partition 1 
8/28/2010 5:55:36 PM  Vista Alarm  [000000010000--------],018,[f70f00040018000c08020000000000],"****DISARMED**** ZONES FAULTED " 
8/28/2010 5:55:38 PM  Vista Alarm  Ignoring Message 
8/28/2010 5:55:38 PM  Vista Alarm  [000100010000--------],0cc,[f700000000cc000c08020000000000],"SYSTEM 1 STATUS N "

        Comment

          #19
          Thanks Mitch,

          the 20p has a different msg setup so 128 msgs are not going to process correctly.

          you can switch back to the 128 option
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment

            #20
            Mitch,
            can you give the build 1.1.13 on the following thread a try and see if it fixes the problem

            http://forums.homeseer.com/showthrea...082#post935082

            please post feedback on the other thread.
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment

            Previous 1 2 template Next
            Working...
            X