Announcement

Collapse
No announcement yet.

S6 UltraCID3 on Win 10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ralnet
    replied
    I have the plugin working on com port 7 of my S6 controller. Could not get the modem to connect on com port 6. I will look at that issue later as that IU s not an issue with the plugin. Thank you

    Leave a comment:


  • ralnet
    replied
    Thanks I will report results when I complete the troubleshooting process.

    Leave a comment:


  • Ultrajones
    replied
    There is a section within the UltraCID3 HSPI User's Guide that walks you through the troubleshooting process. In summary, you'll connect to your modem via PuTTYTel, then issue the commands the plug-in does, then call your phone to see if caller Id is being reported.

    Regards,
    Ultrajones

    Leave a comment:


  • ralnet
    started a topic S6 UltraCID3 on Win 10

    S6 UltraCID3 on Win 10

    Just got around to installing UltraCID3 with a Zoom USB 3095.
    Plug-in status is ok but the device states not connected.
    I checked the Win 7 embedded device manager and I see the USB modem properly installed.
    The device manager states the modem is on port 7.

    I am running an Intel Win 10 Home stick.

    I set it up as modem on the Win 10 operating system of the stick using caller ID software and it works.

    Thanks for any help.

    Bob
Working...
X