Support for the Z-Wave HAI Thermostat

[GreenAcres]

Rich do I need to fill out a help desk ticket?

Thanks

Thom

[rjh]

You probably should. Are you sure you have the latest plugin from the updater?

I may have to get one of those thermostats in order to debug this since the 80Z we have here works fine.

[GreenAcres]

Version HSPI_ZWAVETHERM.dll 1.1.2908.28795


This is the correct version right?

Thanks

Thom

[rjh]

It looks like that is not the correct version. I found a problem with the updater. Run the updater again and make sure it installs version 1.2.0.0 and see if the issue is still there.

[GreenAcres]

Rich it is some what working but errors galore?

here is the debug info:

4/5/2008 7:47:45 PM ZWave Thermostats Staus Error: Error sending temperature command (1<4>), return was ERROR
4/5/2008 7:47:23 PM ZWave Thermostats 1 Thermostats converted Successfully.
4/5/2008 7:47:23 PM ZWave Thermostats Devices Updated for thermostat: Heat Pump
4/5/2008 7:47:23 PM ZWave Thermostats Error in GetSupportedModes: Return was null
4/5/2008 7:47:22 PM ZWave Thermostats Error in StatName, Object reference not set to an instance of an object.
4/5/2008 7:47:22 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:47:17 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:47:17 PM ZWave Thermostats Error in StatName, Object reference not set to an instance of an object.
4/5/2008 7:47:17 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:47:09 PM ZWave Thermostats Error in StatName, Object reference not set to an instance of an object.
4/5/2008 7:47:09 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:47:06 PM ZWave Error getting thermostat data: Error getting thermostat data: Object reference not set to an instance of an object.
4/5/2008 7:47:06 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:47:03 PM ZWave Thermostats Error in GetSupportedModes: Return was null
4/5/2008 7:46:47 PM ZWave Error getting thermostat data: Error getting thermostat data: Object reference not set to an instance of an object.
4/5/2008 7:46:47 PM ZWave Thermostats Error in StatObj: Collection index must be in the range 1 to the size of the collection.
4/5/2008 7:46:43 PM ZWave Thermostats Error in GetSupportedFanModes: Return was null
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P6 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P5 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P4 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P3 = 7545
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P2 = 0
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P1 = 1
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P0 = 32
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P6 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P5 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P4 =
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P3 = 7623
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P2 = 0
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P1 = 1
4/5/2008 7:52:40 PM ZWave Thermostats DEBUG HS Event Debug : P0 = 32
4/5/2008 7:52:32 PM ZWave Thermostats DEBUG Sending ZWave Command: C<2><1> to Thermostat at ZWaveID: 56
4/5/2008 7:52:31 PM ZWave Thermostats Staus Error: Error sending fan mode command (D<2>), return was ERROR
4/5/2008 7:52:31 PM ZWave Thermostats DEBUG Entering ProcessCMD, CMD=ERROR
4/5/2008 7:52:31 PM ZWave Thermostats DEBUG Received return: ERROR from thermostat at ID: 56
4/5/2008 7:52:10 PM ZWave Thermostats DEBUG Sending ZWave Command: D<2> to Thermostat at ZWaveID: 56
4/5/2008 7:52:09 PM ZWave Thermostats Staus Error: Error sending mode command (@<2>), return was ERROR
4/5/2008 7:52:09 PM ZWave Thermostats DEBUG Entering ProcessCMD, CMD=ERROR
4/5/2008 7:52:09 PM ZWave Thermostats DEBUG Received return: ERROR from thermostat at ID: 56
4/5/2008 7:51:49 PM ZWave Thermostats DEBUG Sending ZWave Command: @<2> to Thermostat at ZWaveID: 56
4/5/2008 7:51:48 PM ZWave Thermostats Staus Error: Error sending setpoint command (C<2><2>), return was ERROR
4/5/2008 7:51:48 PM ZWave Thermostats DEBUG Entering ProcessCMD, CMD=ERROR
4/5/2008 7:51:48 PM ZWave Thermostats DEBUG Received return: ERROR from thermostat at ID: 56
4/5/2008 7:51:40 PM Info Event Trigger "Livingroom Lamps Off With No Motion"
4/5/2008 7:51:27 PM ZWave Thermostats Staus Error: Error sending setpoint command (C<2><1>), return was ERROR
4/5/2008 7:51:04 PM ZWave Thermostats Staus Error: Error sending fan mode command (D<2>), return was ERROR
4/5/2008 7:50:42 PM ZWave Thermostats Staus Error: Error sending mode command (@<2>), return was ERROR


What next.

Thanks

Thom

[rjh]

Looks like maybe someone else has been working on this. I'll set up the HAI stat we have next week and re-test.

[GreenAcres]

Thanks I will wait for your reply

Thom

[GreenAcres]

Looks like maybe someone else has been working on this. I'll set up the HAI stat we have next week and re-test.

Rich,

What is the status on this?

Thanks

Thom

[GreenAcres]

Bump!!

[rjh]

I won't be back in my office until next week, I'll have a look then.

[GreenAcres]

Rich,

Did you get this to work , Sorry I purchased this because it works with my system and now I can't wait to get it working with Homeseer.


Thanks

Thom

[GreenAcres]

Bump

[rjh]

I just loaded the 1.2.0.0 plugin with our RC-80BZ thermostat and its working perfectly. Can you re-check that your HSIP_ZWAVETHERM.DLL file is version 1.2.0.0. If so, disable the zwave thermostat plugin, delete the thermostat zwave device in HS then shut down HS, delete the file Zwave.cfg in the HS config folder. Start HS, click on Load Devices in the Z-Wave config to get the zwave device back, then re-enable the plugin. See if you still get errors. Tell me the exact model # of your thermostat.

[GreenAcres]

Rich,

I just followed you instructions to the letter.

Version of dll 1.2.0.0

Same issues, same errors

Thermostat Model HAI 100BZ

Thanks

Thom

[GreenAcres]

Rich,

I just followed you instructions to the letter.

Version of dll 1.2.0.0

Same issues, same errors

Thermostat Model HAI 100BZ

Thanks

Thom