This plugin is designed to interface HomeSeer with your Nest devices: Nest Thermostat, Nest Protect and Nest Cam
Please report any bug.
Please read the User Guide before installing.
The latest Beta version of this plugin is available in the Beta section of the updater.
Changes to v3.0.0.31
- Fixed missing piece of code for "Emergency Heat"
Changes to v3.0.0.30
- Added "Emergency heat" device
- Round values when setting target temperatures
Changes to v3.0.0.29
- Target Temperature devices now shows eco temperatures low/high, when eco mode.
Changes to v3.0.0.28
- Added "Last Snapshot" device for cameras with a "Take Snaphot" button.
Changes to v3.0.0.27
- Added possibility to filter the camera event triggers on specific zones and based on motion/person/sound
Changes to v3.0.0.26
- Use name of thermostats, protects and cameras to fill in the location1 field of corresponding devices
- Prevent bundled calls, the delay between a HVAC change and a target temperature change must be at least 30 seconds.
Changes to v3.0.0.23
- Removed controls for Home/Away and for camera streaming on/off, as it is against the Nest Design Policies to algorithmically set those values.
- Added Nest specific event action called "Set Estimated Time of Arrival"
- Automatically delete HS devices when Nest authorization is revoked or when a specific Nest device is deleted
- Changed target temperature device ranges to 9-32 C and 50-90 F
Changes to v3.0.0.22
- Added better logs when handling Nest errors
Changes to v3.0.0.21
- Added new ECO mode
- Properly deauthorize access token when resetting authentication
Changes to v3.0.0.20
- Target Temperature devices now shows away temperatures low/high, when in away mode.
Changes to v3.0.0.19
- Changed device status icons to default HS status icons
- Fixed bug in Log to File
- Fixed bug that was resetting device properties on each restart.
- Added ControlUse properties for thermostats
Changes to v3.0.0.18
- Added possibility to write logs to a file
Changes to v3.0.0.17
- Added support for cameras: possibility to turn streaming on/off, possibility to trigger events based on motion and/or sound
Changes to v3.0.0.16
- Improved general robustness of the plugin
Changes to v3.0.0.14
- The HVAC status device now reports the actual state of your HVAC system (Heating, Cooling, Idle), rather than being inferred from current and target temperatures
Changes to v3.0.0.13
- Added timeout so that when connection is lost plugin does not get stuck
- Added timestamp in console logs
Changes to v3.0.0.12:
- HSTouch integration / thermostat API
- Automatic upgrade of devices without having to delete them
Changes to v3.0.0.11:
- Fixed problem with coma used as decimal separator in some regions.
Changes to v3.0.0.10:
- Added "Humidity" and "HVAC Status" devices
Changes to v3.0.0.8:
- Added support for Linux
- Fixed reconnection problem
Changes to v3.0.0.7:
- Fixed Heat and Cool setpoints display reversed in HSTouch
Changes to v3.0.0.6:
- target .NET4.0 instead of .NET4.5, in order to be compatible with Win XP and HomeTrollers
Changes to v3.0.0.5:
- Added fan device
- Implemented thermostat API
Changes to v3.0.0.4:
- Fixed authorization process
- cosmetic changes
Changes to v3.0.0.3:
- Fixed update of devices
- more debug logs for PUT requests
Changes to v3.0.0.2:
- added HVAC Mode device
- enhanced debug logs
Changes to v3.0.0.1:
- Fixed update of HS devices
Please report any bug.
Please read the User Guide before installing.
The latest Beta version of this plugin is available in the Beta section of the updater.
Changes to v3.0.0.31
- Fixed missing piece of code for "Emergency Heat"
Changes to v3.0.0.30
- Added "Emergency heat" device
- Round values when setting target temperatures
Changes to v3.0.0.29
- Target Temperature devices now shows eco temperatures low/high, when eco mode.
Changes to v3.0.0.28
- Added "Last Snapshot" device for cameras with a "Take Snaphot" button.
Changes to v3.0.0.27
- Added possibility to filter the camera event triggers on specific zones and based on motion/person/sound
Changes to v3.0.0.26
- Use name of thermostats, protects and cameras to fill in the location1 field of corresponding devices
- Prevent bundled calls, the delay between a HVAC change and a target temperature change must be at least 30 seconds.
Changes to v3.0.0.23
- Removed controls for Home/Away and for camera streaming on/off, as it is against the Nest Design Policies to algorithmically set those values.
- Added Nest specific event action called "Set Estimated Time of Arrival"
- Automatically delete HS devices when Nest authorization is revoked or when a specific Nest device is deleted
- Changed target temperature device ranges to 9-32 C and 50-90 F
Changes to v3.0.0.22
- Added better logs when handling Nest errors
Changes to v3.0.0.21
- Added new ECO mode
- Properly deauthorize access token when resetting authentication
Changes to v3.0.0.20
- Target Temperature devices now shows away temperatures low/high, when in away mode.
Changes to v3.0.0.19
- Changed device status icons to default HS status icons
- Fixed bug in Log to File
- Fixed bug that was resetting device properties on each restart.
- Added ControlUse properties for thermostats
Changes to v3.0.0.18
- Added possibility to write logs to a file
Changes to v3.0.0.17
- Added support for cameras: possibility to turn streaming on/off, possibility to trigger events based on motion and/or sound
Changes to v3.0.0.16
- Improved general robustness of the plugin
Changes to v3.0.0.14
- The HVAC status device now reports the actual state of your HVAC system (Heating, Cooling, Idle), rather than being inferred from current and target temperatures
Changes to v3.0.0.13
- Added timeout so that when connection is lost plugin does not get stuck
- Added timestamp in console logs
Changes to v3.0.0.12:
- HSTouch integration / thermostat API
- Automatic upgrade of devices without having to delete them
Changes to v3.0.0.11:
- Fixed problem with coma used as decimal separator in some regions.
Changes to v3.0.0.10:
- Added "Humidity" and "HVAC Status" devices
Changes to v3.0.0.8:
- Added support for Linux
- Fixed reconnection problem
Changes to v3.0.0.7:
- Fixed Heat and Cool setpoints display reversed in HSTouch
Changes to v3.0.0.6:
- target .NET4.0 instead of .NET4.5, in order to be compatible with Win XP and HomeTrollers
Changes to v3.0.0.5:
- Added fan device
- Implemented thermostat API
Changes to v3.0.0.4:
- Fixed authorization process
- cosmetic changes
Changes to v3.0.0.3:
- Fixed update of devices
- more debug logs for PUT requests
Changes to v3.0.0.2:
- added HVAC Mode device
- enhanced debug logs
Changes to v3.0.0.1:
- Fixed update of HS devices
Comment