I've had 5 CT101 thermostats working fine for several years. I recently added a 2nd ZNet network and moved 1 tstat to the new network; mayhem and chaos followed. I run a morning and evening HVAC event that sets all the tstat operating parameters (in case they were manually adjusted during the preceding 12 hrs); the evening event sets the cooling setpoint to 68 and the morning event sets the cooling setpoint to 72. The events look like this:
IF This event is MANUALLY triggered (This event is triggered by a "HVAC Schedule" event)
Then Set Devices
Thermostats Apartment Operating Mode to Auto
Thermostats Living Operating Mode to Auto
Thermostats Dining Operating Mode to Auto
Thermostats Guest Hall Operating Mode to Auto
Thermostats Master Mode to Auto
Then Set Devices
Thermostats Apartment Fan Mode to Auto
Thermostats Living Fan Mode to Auto
Thermostats Dining Fan Mode to Auto
Thermostats Guest Hall Fan Mode to Auto
Thermostats Master Fan Mode to Auto
Then Set Devices
Thermostats Apartment Cooling Setpoint to 72 F
Thermostats Living Cooling Setpoint to 72 F
Thermostats Dining Cooling Setpoint to 72 F
Thermostats Guest Hall Cooling Setpoint to 72 F
Thermostats Master Cooling Setpoint to 72 F
Then Set Devices
Thermostats Apartment Heating Setpoint to 60 F
Thermostats Living Heating Setpoint to 60 F
Thermostats Dining Heating Setpoint to 60 F
Thermostats Guest Hall Heating Setpoint to 60 F
Thermostats Master Heating Setpoint to 60 F
While the other 4 tstats behave correctly when the event runs, the Master tstat (newly moved to the new network) reports that it set the Cooling setpoint to 72, but does not do so?!? The mobile app also reports that the Master tstat is set to 72. This morning's log is typical and looks like this (note that the event set the Cooling Setpoint to 72 at 6:20A, but it was still 68 at 7:37A when I manually reset it to 72, at 11:28A it was again 68?!?):
NOTE: AT 11:28 AM...THOUGH THE LOG RECORDS NOTHING, THE MASTER TSTAT IS AGAIN SET AT 68 (F)
Mar-28 9:34:55 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:59:37 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Fan State Set to Fan State 0
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Operating State Set to Operating State 0
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to Setpoint 72 (F) THIS WAS ME MANUALLY SETTING IT
Mar-28 7:37:46 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:37:46 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to Setpoint 68 (F)
Mar-28 6:20:01 AM Z-Wave Device: Thermostats Guest Hall Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Dining Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Living Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Apartment Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Master Heating Setpoint Set to 60
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Operating Mode to Auto (3)
Mar-28 6:20:00 AM Event Event Trigger "XCode: HVAC Settings At Home Day"
I have tried removing and re-adding the Master tstat, but it made no difference. I don't know how to test for demons, but if anyone does or has other ideas about this problem, I'd love to hear them.
IF This event is MANUALLY triggered (This event is triggered by a "HVAC Schedule" event)
Then Set Devices
Thermostats Apartment Operating Mode to Auto
Thermostats Living Operating Mode to Auto
Thermostats Dining Operating Mode to Auto
Thermostats Guest Hall Operating Mode to Auto
Thermostats Master Mode to Auto
Then Set Devices
Thermostats Apartment Fan Mode to Auto
Thermostats Living Fan Mode to Auto
Thermostats Dining Fan Mode to Auto
Thermostats Guest Hall Fan Mode to Auto
Thermostats Master Fan Mode to Auto
Then Set Devices
Thermostats Apartment Cooling Setpoint to 72 F
Thermostats Living Cooling Setpoint to 72 F
Thermostats Dining Cooling Setpoint to 72 F
Thermostats Guest Hall Cooling Setpoint to 72 F
Thermostats Master Cooling Setpoint to 72 F
Then Set Devices
Thermostats Apartment Heating Setpoint to 60 F
Thermostats Living Heating Setpoint to 60 F
Thermostats Dining Heating Setpoint to 60 F
Thermostats Guest Hall Heating Setpoint to 60 F
Thermostats Master Heating Setpoint to 60 F
While the other 4 tstats behave correctly when the event runs, the Master tstat (newly moved to the new network) reports that it set the Cooling setpoint to 72, but does not do so?!? The mobile app also reports that the Master tstat is set to 72. This morning's log is typical and looks like this (note that the event set the Cooling Setpoint to 72 at 6:20A, but it was still 68 at 7:37A when I manually reset it to 72, at 11:28A it was again 68?!?):
NOTE: AT 11:28 AM...THOUGH THE LOG RECORDS NOTHING, THE MASTER TSTAT IS AGAIN SET AT 68 (F)
Mar-28 9:34:55 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:59:37 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Fan State Set to Fan State 0
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Operating State Set to Operating State 0
Mar-28 7:37:55 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to Setpoint 72 (F) THIS WAS ME MANUALLY SETTING IT
Mar-28 7:37:46 AM Z-Wave Device: Thermostats Master Temperature Set to 67.5 (F)
Mar-28 7:37:46 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to Setpoint 68 (F)
Mar-28 6:20:01 AM Z-Wave Device: Thermostats Guest Hall Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Dining Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Living Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Apartment Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Master Heating Setpoint Set to 60
Mar-28 6:20:00 AM Z-Wave Device: Thermostats Master Cooling Setpoint Set to 72
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Heating Setpoint to 60 F (60)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Cooling Setpoint to 72 F (72)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Fan Mode to Auto (0)
Mar-28 6:20:00 AM Device Control Device: Thermostats Master Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Guest Hall Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Dining Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Living Operating Mode to Auto (3)
Mar-28 6:20:00 AM Device Control Device: Thermostats Apartment Operating Mode to Auto (3)
Mar-28 6:20:00 AM Event Event Trigger "XCode: HVAC Settings At Home Day"
I have tried removing and re-adding the Master tstat, but it made no difference. I don't know how to test for demons, but if anyone does or has other ideas about this problem, I'd love to hear them.
Comment