Ok I have been running Homeseer for going on three years now in my small business... The thermostat functions have been pretty reliable for me in the past, but now that the weather is changing around here I have had to make some basic changes and then trouble started.
Some info on the system:
HomeSeer Version 2.1.104.0
RCS thermostat plug in 2.1.2305.19627
hard wired serial type
4 TR16 RS485 thermostats
I have multiple events for 1 thermostat depending on the day (same for Mon-Fri, different on Sat and different on Sun) and the other 3 thermostats follow the same event every day of the week. (different part of the building different requirements)
The issue I am currently having is the Therapy thermostat is not changing to the correct temperature in the mornings. Here is a copy paste of the event
Name:
Therapy M-F 730AM to 630PM_____Sat 720AM to 1200PM
Trigger:
6:30 AM
Mo,Tu,We,Th,Fr,Sa
Action:
RCS Serial Thermostats: Therapy Thermostat:
Set Mode: Heat
RCS Serial Thermostats: Therapy Thermostat:
Set Fan Mode: On
RCS Serial Thermostats: Therapy Thermostat:
Set Heat Setpoint: 72
RCS Serial Thermostats: Therapy Thermostat:
Set Cool Setpoint: 78
Pretty straight forward stuff right? Well when I come in at 8am the heat setting is at 64! way too cold and the early morning patients are complaining, so I have a problem... I tried a redundant event to see if that made a difference and no... the other two events for this thermostat seem to work fine... at night: kicks to auto and 60 on the heat and 80 on the cool fan to auto AND on Sat at noon it does the same...
The other 3 thermostats are also working correctly with 2 events per day being executed...
What is my problem here? about to have to put a std programable back into place... But that wont fullfil my needs of remote accessability so that isn't a great option... Just want this thing to work as it used to.
Thanks for your help.. Hope to get this worked out ASAP
Some info on the system:
HomeSeer Version 2.1.104.0
RCS thermostat plug in 2.1.2305.19627
hard wired serial type
4 TR16 RS485 thermostats
I have multiple events for 1 thermostat depending on the day (same for Mon-Fri, different on Sat and different on Sun) and the other 3 thermostats follow the same event every day of the week. (different part of the building different requirements)
The issue I am currently having is the Therapy thermostat is not changing to the correct temperature in the mornings. Here is a copy paste of the event
Name:
Therapy M-F 730AM to 630PM_____Sat 720AM to 1200PM
Trigger:
6:30 AM
Mo,Tu,We,Th,Fr,Sa
Action:
RCS Serial Thermostats: Therapy Thermostat:
Set Mode: Heat
RCS Serial Thermostats: Therapy Thermostat:
Set Fan Mode: On
RCS Serial Thermostats: Therapy Thermostat:
Set Heat Setpoint: 72
RCS Serial Thermostats: Therapy Thermostat:
Set Cool Setpoint: 78
Pretty straight forward stuff right? Well when I come in at 8am the heat setting is at 64! way too cold and the early morning patients are complaining, so I have a problem... I tried a redundant event to see if that made a difference and no... the other two events for this thermostat seem to work fine... at night: kicks to auto and 60 on the heat and 80 on the cool fan to auto AND on Sat at noon it does the same...
The other 3 thermostats are also working correctly with 2 events per day being executed...
What is my problem here? about to have to put a std programable back into place... But that wont fullfil my needs of remote accessability so that isn't a great option... Just want this thing to work as it used to.
Thanks for your help.. Hope to get this worked out ASAP
Comment