Ok I have been running Homeseer for going on three years now in my small business... The thermostat functions have been pretty reliable for me in the past, but after switching seasons a while back and making some changes to the events reliability has gone out the window...
Some info on the system:
HomeSeer Version 2.3.0.19
RCS thermostat plug in 2.4.02
hard wired serial type
4 TR16 RS485 thermostats
I have multiple events for 1 thermostat depending on the day (same for Mon-Fri, different on Sat and different on Sun) and the other 3 thermostats follow the same two events every day of the week. (different part of the building different requirements)
The issue is the thermostats seem to have minds of their own... This morning for example uses the following event and acording the the homeseer log ran just fine. However when I arrived at probably 9:30am the heat set point was at 59*!! So needless to say it was cold in here.
Name:
Therapy M-F 730AM to 630PM_____Sat 720AM to 1200PM
Trigger:
6:30 AM
Mo,Tu,We,Th,Fr,Sa
Action:
RCS Serial Thermostats: Therapy Thermostat:
Set Mode: Auto
RCS Serial Thermostats: Therapy Thermostat:
Set Fan Mode: On
RCS Serial Thermostats: Therapy Thermostat:
Set Heat Setpoint: 68
RCS Serial Thermostats: Therapy Thermostat:
Set Cool Setpoint: 74
What is my problem here? about to have to put a std programable back into place... But that wont fulfill my needs of remote accessability so that isn't a great option... Just want this thing to work as it used to.
I have asked this question in the past and just been too busy to follow up and things were kinda sorta working right.. No consistancy in the issues, once a week 3 times a week, different days, some events never skip a beat... Very frustrating. When I posted this question before I was told to update homeseer and the plugin which I did... I was also told to check the internal scheduling of the thermostats, but was then told that the TR16s dont have any capability of an internal scheduler... Sooo I'm lost please HELP!
Thanks for your help.. Hope to get this worked out ASAP, people getting impatient with me
Some info on the system:
HomeSeer Version 2.3.0.19
RCS thermostat plug in 2.4.02
hard wired serial type
4 TR16 RS485 thermostats
I have multiple events for 1 thermostat depending on the day (same for Mon-Fri, different on Sat and different on Sun) and the other 3 thermostats follow the same two events every day of the week. (different part of the building different requirements)
The issue is the thermostats seem to have minds of their own... This morning for example uses the following event and acording the the homeseer log ran just fine. However when I arrived at probably 9:30am the heat set point was at 59*!! So needless to say it was cold in here.
Name:
Therapy M-F 730AM to 630PM_____Sat 720AM to 1200PM
Trigger:
6:30 AM
Mo,Tu,We,Th,Fr,Sa
Action:
RCS Serial Thermostats: Therapy Thermostat:
Set Mode: Auto
RCS Serial Thermostats: Therapy Thermostat:
Set Fan Mode: On
RCS Serial Thermostats: Therapy Thermostat:
Set Heat Setpoint: 68
RCS Serial Thermostats: Therapy Thermostat:
Set Cool Setpoint: 74
What is my problem here? about to have to put a std programable back into place... But that wont fulfill my needs of remote accessability so that isn't a great option... Just want this thing to work as it used to.
I have asked this question in the past and just been too busy to follow up and things were kinda sorta working right.. No consistancy in the issues, once a week 3 times a week, different days, some events never skip a beat... Very frustrating. When I posted this question before I was told to update homeseer and the plugin which I did... I was also told to check the internal scheduling of the thermostats, but was then told that the TR16s dont have any capability of an internal scheduler... Sooo I'm lost please HELP!
Thanks for your help.. Hope to get this worked out ASAP, people getting impatient with me
Comment