Maybe I am missing something here - but why so many wake up calls?

[larhedse]

Hi Steve,

And a very large thank you for a very good explanation for my challenge :-)

So here is a list of the devices I have, do note I know Z-Wave Node 4/12/13/14 are reporting 5 minutes - they send the temperature every 5 minutes. However the other...

Device ID HS3	Node Z-Wave	Room	Description
21	4	Bedroom	Lightsensor Fibaro On/Off Sensor	Battery
152	5	Balconey	Door Sensor Fibaro On/Off Sensor	Battery
186	12	Work Study	Lightsensor Fibaro On/Off Sensor	Battery
192	13	Livingroom	Lightsensor Fibaro On/Off Sensor	Battery
198	14	Dining area	Lightsensor Fibaro On/Off Sensor	Battery
276	15	Bathroom	Water Flood Sensor Fibaro Sensor Alarm	Battery
282	16	Kitchen	Water Flood Sensor Fibaro Sensor Alarm	Battery
290	17	Hallway	Smoke Sensor Fibaro Notification Sensor	Battery
316	21	Hallway	Door Sensor Fibaro On/Off Sensor	Battery
327	22	Hallway	Motion Sensor Everspring On/Off Sensor	Battery
333	24	Hallway	Ceiling Motion Sensor Philio On/Off Sensor	Battery
340	26	Bathroom	Motion Sensor HomeSeer Tech On/Off Sensor	Battery
348	28	Walk-In-Closet	Door Sensor Fibaro On/Off Sensor	Battery
381	35	Kitchen	Motion Sensor Philio On/Off Sensor	Battery
405	44	Dining area	Motion Sensor Under Table Philio On/Off Sensor	Battery
426	52	Bedroom	Motion Sensor under Bed Marianne HomeSeer Tech On/Off Sensor	Battery
431	54	Bedroom	Motion Sensor under Bed Lars HomeSeer Tech On/Off Sensor	Battery
477	57	Balconey	Lightsensor Aeon Labs Multilevel Sensor	USB-Powered
502	61	Bedroom	CO Sensor Fibaro Notification Sensor	Battery

So any recommendation are welcome :-)

[SteveMSJ]

So I had SDJ Health just installed (a day ago or something), and well it does add upp all battery devices I think I have, so all well and all that.

However, when I look in my log I get rather much more logging nowdays, and it all seems to originate from SDJ Helath, so instead of going around wondering what I have done I will simply ask, Is this normal:

I could easily add very large number of lines in the same pattern as above. Node 21 for example seems very popular for some odd reason?

Or what it is that I do not get?

Hi larhedse

You can turn off SDJ-Health log messages by setting the LogLevel to 0 on the SDJ-Health/Config page. Only startup and error messages will then be logged.

The ZWave plug-in wake-up messages can be turned off but if you do that then SDJ-Health won't be able to monitor wake-ups. HS3 doesn't provide any mechanism to inform plug-ins when devices wake-up so the only method is to monitor the log.

However, what your log reveals is that you have very short sleep periods set on many of your battery devices. Depending on what these devices are this is probably unnecessary; is filling the log with messages; and is draining the batteries. If you look at the SDJ-Health monitoring devices the plug-in displays the 'Last Sleep' time for each monitored device, which is the interval between wake-ups.

Taking Node 4 as an example, it looks from your log extract that you have it set to wake-up every 5 minutes. I don't know what this device is but most modern ZWave devices don't need to wake-up to function. If they are something like a door/window sensor they will broadcast open and close events in real time, if they are a temp sensor they will send out temp readings at configured intervals or when the temp has changed by a preset amount. They don't usually require to be polled for any normal readings, which is what wake-ups would be required for. Some require to be polled for battery level, but once every 12 hours would be often enough and most send battery readings without polling anyway. Normally only battery devices that you control remotely, such as thermostats, require short wake-up times. I have most of my battery devices, e.g. Fibaro door/window sensors, set to 6 or 12 hour wake-ups.

The other time you need a battery device to wake-up is to configure parameters but normally you need to manually wake them up to do this.

It would be worth you having a look at what wake-up time periods you have set for your devices and whether they can be extended. This will significantly reduce logging and extend battery life.

If you post details of your devices I will try and help with choosing suitable wake-up periods.

Steve

[larhedse]

So I had SDJ Health just installed (a day ago or something), and well it does add upp all battery devices I think I have, so all well and all that.

However, when I look in my log I get rather much more logging nowdays, and it all seems to originate from SDJ Helath, so instead of going around wondering what I have done I will simply ask, Is this normal:

Dec-28 01:52:44           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 5(Balconey Door Sensor Fibaro On/Off Sensor).
Dec-28 01:52:43           Z-Wave     Wake-Up Util Proc for (Balconey Door Sensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:52:43           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 5 (Balconey Door Sensor Fibaro On/Off Sensor)
Dec-28 01:52:43           SDJ-Health     Wake-Up Device #152 added to message queue for processing.
Dec-28 01:52:43           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 5
Dec-28 01:51:45           SDJ-Health     1 queued messages processed
Dec-28 01:50:07           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:50:07           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:50:07           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:50:07           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:50:07           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:47:45           SDJ-Health     1 queued messages processed
Dec-28 01:47:16           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 28(Walk-In-Closet Door Sensor Fibaro On/Off Sensor).
Dec-28 01:47:15           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 28 (Walk-In-Closet Door Sensor Fibaro On/Off Sensor)
Dec-28 01:47:15           SDJ-Health     Wake-Up Device #348 added to message queue for processing.
Dec-28 01:47:15           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 28
Dec-28 01:45:45           SDJ-Health     1 queued messages processed
Dec-28 01:45:07           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:45:07           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Send Other Data
Dec-28 01:45:07           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:45:07           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:45:07           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:41:45           SDJ-Health     1 queued messages processed
Dec-28 01:40:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:40:06           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:40:06           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:40:06           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:40:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:37:45           SDJ-Health     1 queued messages processed
Dec-28 01:36:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 16(Kitchen Water Flood Sensor Fibaro Sensor Alarm).
Dec-28 01:36:06           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 16 (Kitchen Water Flood Sensor Fibaro Sensor Alarm)
Dec-28 01:36:06           SDJ-Health     Wake-Up Device #282 added to message queue for processing.
Dec-28 01:36:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 16
Dec-28 01:35:45           SDJ-Health     2 queued messages processed
Dec-28 01:35:32           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 21(Hallway Door Sensor Fibaro On/Off Sensor).
Dec-28 01:35:32           SDJ-Health     Wake-Up Device #316 added to message queue for processing.
Dec-28 01:35:32           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 21 (Hallway Door Sensor Fibaro On/Off Sensor)
Dec-28 01:35:32           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 21
Dec-28 01:35:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:35:06           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:35:06           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:35:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:34:03           Z-Wave Error     (2) Sensor Multilevel Report for type Velocity received, but the corresponding device Node ID cannot be found.(2) Node/Instance=45/-1
Dec-28 01:33:45           SDJ-Health     1 queued messages processed
Dec-28 01:32:42           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 5(Balconey Door Sensor Fibaro On/Off Sensor).
Dec-28 01:32:42           Z-Wave     Wake-Up Util Proc for (Balconey Door Sensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:32:42           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 5 (Balconey Door Sensor Fibaro On/Off Sensor)
Dec-28 01:32:42           SDJ-Health     Wake-Up Device #152 added to message queue for processing.
Dec-28 01:32:42           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 5
Dec-28 01:31:45           SDJ-Health     1 queued messages processed
Dec-28 01:30:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:30:06           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:30:06           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:30:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:29:45           SDJ-Health     1 queued messages processed
Dec-28 01:29:44           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 57(Balconey Lightsensor Aeon Labs Multilevel Sensor).
Dec-28 01:29:44           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 57 (Balconey Lightsensor Aeon Labs Multilevel Sensor)
Dec-28 01:29:44           SDJ-Health     Wake-Up Device #477 added to message queue for processing.
Dec-28 01:29:44           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 57
Dec-28 01:27:45           SDJ-Health     1 queued messages processed
Dec-28 01:27:19           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 28(Walk-In-Closet Door Sensor Fibaro On/Off Sensor).
Dec-28 01:27:19           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 28 (Walk-In-Closet Door Sensor Fibaro On/Off Sensor)
Dec-28 01:27:19           SDJ-Health     Wake-Up Device #348 added to message queue for processing.
Dec-28 01:27:19           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 28
Dec-28 01:25:45           SDJ-Health     1 queued messages processed
Dec-28 01:25:06           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:25:05           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:25:05           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:25:05           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:25:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:21:45           SDJ-Health     1 queued messages processed
Dec-28 01:20:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:20:05           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Send Other Data
Dec-28 01:20:05           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:20:05           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:20:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:15:45           SDJ-Health     2 queued messages processed
Dec-28 01:15:43           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 21(Hallway Door Sensor Fibaro On/Off Sensor).
Dec-28 01:15:43           SDJ-Health     Wake-Up Device #316 added to message queue for processing.
Dec-28 01:15:43           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 21 (Hallway Door Sensor Fibaro On/Off Sensor)
Dec-28 01:15:43           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 21
Dec-28 01:15:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:15:05           Z-Wave     Wake-Up Util Proc for (Bedroom Lightsensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:15:05           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:15:05           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:15:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:15:00           Log Info     The log database is currently 4.11MB in size.
Dec-28 01:15:00           Log Maintenance     114 records, selected by date/time, were removed from the log database.
Dec-28 01:13:45           SDJ-Health     1 queued messages processed
Dec-28 01:12:42           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 5(Balconey Door Sensor Fibaro On/Off Sensor).
Dec-28 01:12:42           Z-Wave     Wake-Up Util Proc for (Balconey Door Sensor Fibaro On/Off Sensor) handling: Poll Device
Dec-28 01:12:42           SDJ-Health     Wake-Up Device #152 added to message queue for processing.
Dec-28 01:12:42           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 5 (Balconey Door Sensor Fibaro On/Off Sensor)
Dec-28 01:12:42           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 5
Dec-28 01:11:45           SDJ-Health     1 queued messages processed
Dec-28 01:10:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:10:05           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:10:05           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:10:05           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:07:45           SDJ-Health     1 queued messages processed
Dec-28 01:07:21           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 28(Walk-In-Closet Door Sensor Fibaro On/Off Sensor).
Dec-28 01:07:21           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 28 (Walk-In-Closet Door Sensor Fibaro On/Off Sensor)
Dec-28 01:07:21           SDJ-Health     Wake-Up Device #348 added to message queue for processing.
Dec-28 01:07:21           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 28
Dec-28 01:05:45           SDJ-Health     1 queued messages processed
Dec-28 01:05:04           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 4(Bedroom Lightsensor Fibaro On/Off Sensor).
Dec-28 01:05:04           Z-Wave     Z-Wave Controller: Wake-Up Notification Processing for Node 4 (Bedroom Lightsensor Fibaro On/Off Sensor)
Dec-28 01:05:04           SDJ-Health     Wake-Up Device #21 added to message queue for processing.
Dec-28 01:05:04           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up Notification Received for Node 4
Dec-28 01:05:00           Device Control     Device: Status Adjust TOD zone Adjust Morning Late to Off (0) by/from: CAPI Control Handler
Dec-28 01:01:45           SDJ-Health     2 queued messages processed
Dec-28 01:00:38           Z-Wave     Z-Wave Controller: Z-Wave Wake-Up 'No More Info' Notification sent to Node 22(Hallway Motion Sensor Everspring On/Off Sensor).

I could easily add very large number of lines in the same pattern as above. Node 21 for example seems very popular for some odd reason?

Or what it is that I do not get?