Announcement

Collapse
No announcement yet.

How to dim device

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blade
    replied
    In HS2, HS-ControlDevice does not exist. You need to use the HS-ExecX10 calls

    Try

    BLML2HS|HS-ExecX10~SP1~On

    Leave a comment:


  • tmcgowan
    replied
    Syntax for controlling a HS Device?

    Hello Blade,

    I'm trying to control a HS/2 device *1 which I've substituted the asterisk with the letters SP in your HS/2 plugin. The ML device BLML2HS_SP1 displays the correct status, however, when I try to control the device with the following ML command it doesn't seem to work:

    BLML2HS|HS~ControlDevice~SP1~On or BLML2HS|HS~ControlDevice~SP1~Off

    Am I doing something wrong?

    Thanks,

    Todd

    Leave a comment:


  • jeeperboy
    replied
    Blade,

    Thanks that worked. All fixed.

    Jimd

    Leave a comment:


  • Blade
    replied
    Try 2.0.8 in the HS3 updater
    If you still have problems then do the following

    Turn on debug logging in the HS plugin and run the command in MLServer
    Then turn off debug logging and attach the BLML2HS-Detailed.log file zipped here and I will have a look
    Last edited by Blade; March 23, 2014, 01:48 PM.

    Leave a comment:


  • jeeperboy
    replied
    Blade

    MLServeCmd.BLML2HS|HS-ControlDevice~06.C7.FE:1~Dim~20

    didn't work I think it might be a HS3 bug at this point.

    Leave a comment:


  • Blade
    replied
    If you are using HS3 try this:

    MLServeCmd.BLML2HS|HS-ControlDevice~06.C7.FE:1~Dim~20

    The best way to see the commands is to use the command builder in MLServer 4

    Leave a comment:


  • jayman13
    replied
    How to dim device

    If you are using hs3 that command no longer works I believe. Hopefully someone else knows the right way of doing it.


    Sent from my iPad using Tapatalk HD

    Leave a comment:


  • jeeperboy
    started a topic How to dim device

    How to dim device

    Anyone have an example ho to Dim a homeseer device from Mainlobby ?

    I have tried the following and the dimmer bar in HS moves but the device will not Dim

    BLML2HS|HS-ExecX10~06.C7.FE:1~Dim~20

    On and off work

    BLML2HS|HS-ExecX10~06.C7.FE:1~On
    BLML2HS|HS-ExecX10~06.C7.FE:1~Off

    Thanks,

    Jeeperboy
Working...
X