The plug-in has worked fine for a couple of years but recently cannot arm/disarm the alarm system. The log shows an error indicating it can't find the control function for the arm control device. I've checked to make sure Control is enabled on the device/function as it was before and also checked the Imperihome multiswitch configuration for this function and it still looks OK. Any clues as to what's going on. All the other Envisilink controls are working through Imperihome. The HS Mobile app is able to control it as well.
| Jul-18 8:09:14 PM | ImperiHome | ERROR can't find id_arm stay control for device 77 | ||||||||||
| Jul-18 8:09:10 PM | ImperiHome | ERROR can't find id_arm away control for device 77 | ||||||||||
| Jul-18 8:08:29 PM | Z-Wave | Device: Node 73 Powder Room Temperature Set to 75.1 (F) | ||||||||||
| Jul-18 8:07:49 PM | Z-Wave | Device: Node 73 Powder Room Temperature Set to 75.2 (F) | ||||||||||
| Jul-18 8:07:34 PM | ImperiHome | ERROR can't find id_arm away control for device 77 | ||||||||||
Comment