Announcement

Collapse
No announcement yet.

Failure to Arm/Disarm Envisalink/DSC Security System

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chuckk9032
    replied
    Thanks. Sorry I missed that thread!

    Leave a comment:


  • spud
    replied
    this is bug in the iOS app, it has been fixed in the latest beta version, read this thread: https://forums.homeseer.com/forum/us...n-some-devices

    Leave a comment:


  • chuckk9032
    started a topic Failure to Arm/Disarm Envisalink/DSC Security System

    Failure to Arm/Disarm Envisalink/DSC Security System

    The plug-in has worked fine for a couple of years but recently cannot arm/disarm the alarm system. The log shows an error indicating it can't find the control function for the arm control device. I've checked to make sure Control is enabled on the device/function as it was before and also checked the Imperihome multiswitch configuration for this function and it still looks OK. Any clues as to what's going on. All the other Envisilink controls are working through Imperihome. The HS Mobile app is able to control it as well.
    Jul-18 8:09:14 PM ImperiHome ERROR can't find id_arm stay control for device 77
    Jul-18 8:09:10 PM ImperiHome ERROR can't find id_arm away control for device 77
    Jul-18 8:08:29 PM Z-Wave Device: Node 73 Powder Room Temperature Set to 75.1 (F)
    Jul-18 8:07:49 PM Z-Wave Device: Node 73 Powder Room Temperature Set to 75.2 (F)
    Jul-18 8:07:34 PM ImperiHome ERROR can't find id_arm away control for device 77
Working...
X