Announcement

Collapse
No announcement yet.

New weathercam

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I had a heck of a time focusing the generic IP camera because of the buffer in it. Seems to be almost 10-15 seconds. That and the image processing that it does makes it difficult to know what is real and not real in the view. So having an analogue output does help. That said the newer one that I should be getting has focus and zoom on it that I can do via the web interface; so it should help configure the camera easier.

    Here is the view with the camera remounted in the test position and focused. (the PITA part).
    Attached Files
    - Pete

    Auto mator
    Homeseer 3 Pro - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU - Mono 6.00
    Homeseer Zee2 (Lite) - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.00

    X10, UPB, Zigbee, ZWave and Wifi MQTT automation.

    Comment


    • #17
      While playing with the weathercams pulled a new network cable to my exterior Russound speaker, exterior HAI temp sensors area under an eave. That said that most likely will be the final position for an IP camera related to weather. Right now though setting up weathercam #1 such that it uploads to WUN as weathercam #1 with a composition of status (via Jon's application) and picture.
      - Pete

      Auto mator
      Homeseer 3 Pro - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU - Mono 6.00
      Homeseer Zee2 (Lite) - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.00

      X10, UPB, Zigbee, ZWave and Wifi MQTT automation.

      Comment


      • #18
        Switched Cumulus webcam to Ubuitu Aircam HD view every few minutes.

        This capture is being done from Zoneminder/RTSP via a Homeseer FTP upload then web forwarded to dynamic web name.

        It can be found here:

        http://lockport2.golffan.us/

        and here:

        http://lockport.golffan.us/
        Last edited by Pete; July 27th, 2012, 11:18 AM.
        - Pete

        Auto mator
        Homeseer 3 Pro - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU - Mono 6.00
        Homeseer Zee2 (Lite) - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.00

        X10, UPB, Zigbee, ZWave and Wifi MQTT automation.

        Comment

        Working...
        X