I would like to go back to a problem I wrote to you in the past. I use the software version VWS 15.00 p05. I use the vws plugin in HS3 for 4 years and over time I have optimized some settings. For the home automation system managed by HS3 I use a lot of temperature and humidity data coming from the 8 oregon sensors that are connected to the vws software and the value relative to the "Temp Rate" is very important to optimize the internal comfort conditions during the summer. example: the management of the closing / opening of motorized windows, and on many other occasions. I saw that the values ​​imported in hs3: "Channel 2 Temp Rate" and "Channel 3 Temp Rate" are always equal to the value "Channel 1 Temp Rate", this was very strange. I'm sure the wrong values ​​"Channel 2 Temp Rate" and "Channel 3 Temp Rate" are wrong while both the "Channel 1/4/5/6/7/8 Temp Rate" are ok. You could fix this error please. The error is not present on the vws software but only when the values ​​are imported into HS. Thank you

____________________________________________________________ ____________________
HomeSeer Version: HS3 Pro Edition
Operating System: Microsoft Windows 7 Professional - Work Station
Anti Virus Installed: ESET Security
Enabled Plug-Ins ADIO-100 Arduino Plugin BLBackup BLDatabase BLMediaPlayer BLVolume Current Cost 3P Device Comparison 3P Device History EasyTrigger Global Cache Pro NetCAM PHLocation Restart VWS Z-Wave
Attached Files