Announcement

Collapse
No announcement yet.

Maps

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CFGuy
    replied
    Originally posted by MNB View Post
    Today's Wed trust your still on for your extend weekend? Mike
    Yep, that is why I won't be available during the days this week, but will be online in the evening.

    Leave a comment:


  • MNB
    replied
    Via the your event example I've created a Device History Chart but my Temp is a line graph (what I want) but my Feels like is a step graph (not what I want) I'm assuming that I have to change it in the Device History Monitored devices tab? I'm using the latest version of Device History (1.3.7.2) and believe we found a oops that Steve is looking into unable to get the Monitored devices tab to display all of my monitored devices will have to wait for new update. Mike
    Attached Files

    Leave a comment:


  • MNB
    replied
    Jeff, thanxs for guidance, I've just got my Device History PI finally setup and am able to now build Charts along with the above fills in the blanks. Today's Wed trust your still on for your extend weekend? Mike

    Leave a comment:


  • CFGuy
    replied
    I have the Temperature and Feels Like Devices setup as Monitored devices.
    Click image for larger version  Name:	Capture2.PNG Views:	2 Size:	9.4 KB ID:	1296870

    The I created an event using the devices.

    Click image for larger version  Name:	Capture.PNG Views:	1 Size:	40.5 KB ID:	1296871

    On every condition run it adds the new info to the chart and saves it to the HomeSeer HS 3\html\skWare\DeviceHistory\images\chart\ directory.

    Leave a comment:


  • drparker151
    replied
    Never mind. Would help if went to page two before answering.

    Leave a comment:


  • MNB
    replied
    Thanxs Jeff, anything special that I have to do to get the same (I have Device History PI but do not use it to it's fullest)? Mike

    Leave a comment:


  • CFGuy
    replied
    Two things happened to cause me to remove the 2 chart images. The hourly chart was using data from Weather Underground. I found a replacement for but then.... Google shut down the API that I was using to turn the charts into images. I ended up using the Device History plugin as the images it produced look a lot better than the ones I was getting from Google. The Google news got lost in everything that was happening the last couple of weeks. I didn't get an email from them. Only noticed it because my images were a few days behind.

    Below is an example from the Device History plugin. .

    Click image for larger version

Name:	Capture.PNG
Views:	83
Size:	38.1 KB
ID:	1296701

    Leave a comment:


  • MNB
    replied
    I've looked everywhere within the PI Tabs for Forecast Chart Image Setup (10 day Hourly Temperature Chart) and Temperature Chart Image Setup (7 day Historical Temperature Chart) can someone point me in the correct direction? Mike

    Leave a comment:


  • MNB
    replied
    Jeff, found the Map Rotation device, thanxs I believe I'm now up and running weatherXML with exception of the -9999 issue and will await your update, thanxs in advance, Mike

    Leave a comment:


  • MNB
    replied
    Jeff, thanxs for taking the time to support. I've verified that "Invalid Value" is set to -9999.

    I would need to see the xml file to confirm if the value is wrong in the data or wrong in the import.
    If you go to the weatherXML admin pages, to the one labeled Devices, there is a textbox where you can enter the value to be used for an invalid value during import. I will have to check to see for sure which fields get set to that invalid value. At some point I need to change that and set it so that you can enter the value you want to be used for invalid is settable by each data type.
    It will most likely be this weekend before I have a chance to look into this.

    Leave a comment:


  • CFGuy
    replied
    Originally posted by MNB View Post
    Last question, looking at my wind speed and degrees I seem to be getting -9999 value which also shows up when use a speak device see attached. I would have thought it would have a value of 0 for wind speed and 000 for degrees (North), any suggestions?

    I would need to see the xml file to confirm if the value is wrong in the data or wrong in the import.
    If you go to the weatherXML admin pages, to the one labeled Devices, there is a textbox where you can enter the value to be used for an invalid value during import. I will have to check to see for sure which fields get set to that invalid value. At some point I need to change that and set it so that you can enter the value you want to be used for invalid is settable by each data type.
    It will most likely be this weekend before I have a chance to look into this.

    Leave a comment:


  • CFGuy
    replied
    Originally posted by MNB View Post
    Jeff, many thanxs for the update PI and document(s) with working examples it makes it a little more coherent and I was able to set-up both Maps and charts. Question not clear as to how one established "Map Rotation" Device I can see what it looks like but.. more clues please, Mike

    Go to the HS Device Management page, find your map devices. Each location will have a Map Group parent. Click on the name to edit the device. On the page where you can see the tabs for Status Graphics, there should be one at the end labeled weatherXML. Click on that tab. There is a dropdown to select Yes or No for having a map rotation device created.

    Leave a comment:


  • MNB
    replied
    Last question, looking at my wind speed and degrees I seem to be getting -9999 value which also shows up when use a speak device see attached. I would have thought it would have a value of 0 for wind speed and 000 for degrees (North), any suggestions?
    Attached Files

    Leave a comment:


  • MNB
    replied
    Jeff, many thanxs for the update PI and document(s) with working examples it makes it a little more coherent and I was able to set-up both Maps and charts. Question not clear as to how one established "Map Rotation" Device I can see what it looks like but.. more clues please, Mike

    Leave a comment:


  • CFGuy
    replied
    Originally posted by MNB View Post
    Jeff, Looking at your word file, other than the temperature7Day_1.png and forecastMultiDay_1.png files that are being created my WeatherXML. The radar and other files are somehow being created some other way. I tried your URL's but they seem to be dated (don't work anymore). I tried using wunderground radar tool for my area (see below), it works within the browser but does not display within the WeatherXML device (broken link), looking at your examples each one seems to be either a Gif or JPG file which I'm not clear how to make these available? More clues please, Mike

    Code:
    https://www.wunderground.com/wundermap?lat=42.20&lon=-75.98&zoom=8&rad=1&wxsn=0&svr=0&cams=0&sat=0&riv=0&mm=0&hur=0

    The radar map is setup on the locations page. See the image below.
    After setting the 3 options, go to the Schedules page and make sure that the Maps schedule is set to run. When the map schedule runs, it will loop over your entered maps and download the radar map and the ones that you have set by setting the download checkbox.

    I really recommend that you upgrade to version .76 which is in the updater now. There is a pdf document for the maps section which is handled quite a bit differently. The checkboxes for download and device are gone hopefully making things less confusing and the example images are coming from my HS3 setup.
    Attached Files

    Leave a comment:

Working...
X