Relationship between UPStart and HS

[DC]

What is the relationship between the Unit ID set by UPStart and the Device Code in HS? It seemed very logical at first:

Unit ID 001 = $1
Unit ID 002 = $2
Unit ID 003 = $3
Unit ID 004 = $4

I could see a pattern that would make it very easy to label each device (especially plug-in modules) so I would know what HS knew them as. I labeled each one $1, $2, Etc.

Well, for some reason that I can't figure out, HS renumbered them when I added Unit ID 005. Now:

Unit ID 001 = $1
Unit ID 002 = $2
Unit ID 003 = $5
Unit ID 004 = $3
Unit ID 005 = $4

What is going on? Can I not count on the Device Code to be the same in HS each time it starts? When I add a new device, I want it to be the next HS Code in sequence. Otherwise, how could I possibly label my modules so I know which HS code will control that module?

[Oman]

The UPB module ID has nothing to do with the HomeSeer device code. They may start out in sync but deleting, renaming, adding, etc. will cause them to diverge. UPB uses the concept of room and device names to keep track. HomeSeer will use the room and device name given to the device.

What is the relationship between the Unit ID set by UPStart and the Device Code in HS? It seemed very logical at first:

Unit ID 001 = $1
Unit ID 002 = $2
Unit ID 003 = $3
Unit ID 004 = $4

I could see a pattern that would make it very easy to label each device (especially plug-in modules) so I would know what HS knew them as. I labeled each one $1, $2, Etc.

Well, for some reason that I can't figure out, HS renumbered them when I added Unit ID 005. Now:

Unit ID 001 = $1
Unit ID 002 = $2
Unit ID 003 = $5
Unit ID 004 = $3
Unit ID 005 = $4

What is going on? Can I not count on the Device Code to be the same in HS each time it starts? When I add a new device, I want it to be the next HS Code in sequence. Otherwise, how could I possibly label my modules so I know which HS code will control that module?

[DC]

HomeSeer will use the room and device name given to the device.

Not reliably, it doesn't:

In UPStart I have two devices called Front Foyer, Lamp 1 and Front Foyer, Lamp 2.

In HS, they are known as Front Foyer, Lamp 2 and Front Foyer, Lamp 3.

[Oman]

When the plugin creates the devices it uses the information from the UPStart export file. If you change the device name or location in UPStart the plugin will rename the device in HomeSeer. Honestly - it does not make any names up :>

Not reliably, it doesn't:

In UPStart I have two devices called Front Foyer, Lamp 1 and Front Foyer, Lamp 2.

In HS, they are known as Front Foyer, Lamp 2 and Front Foyer, Lamp 3.

[DC]

You might want to do some more testing.

When I changed the name of a device in UPStart, HS did NOT reflect the change until I deleted the device from HS and restarted HS. Then it picked up the new name. In fact, I can see in the log where it imported the devices that I had just renamed:

Database Item Saving Device Lamp 1
Database Item Saving Device Lamp 2

It would be really nice if HS recognized the change and automatically reimported the device without having to delete it first.

[Oman]

It should, and does for me. What build of HS and the UPB plug-in are you using?

You might want to do some more testing.

When I changed the name of a device in UPStart, HS did NOT reflect the change until I deleted the device from HS and restarted HS. Then it picked up the new name. In fact, I can see in the log where it imported the devices that I had just renamed:

Database Item Saving Device Lamp 1
Database Item Saving Device Lamp 2

It would be really nice if HS recognized the change and automatically reimported the device without having to delete it first.

[DC]

HS 2.0.1972

UPB Plugin 1.0.0.3

[Oman]

Can you turn on detailed debug logging in the plugin, shutdown HS, edit the name of one device in UPStart, re-export the file and then post the HS log? This might help me figure out what is going wrong. Also let me know what the original and new device names are.

Thanks

HS 2.0.1972

UPB Plugin 1.0.0.3

[DC]

10/4/2005 11:31:38 PM - Startup - Loading configuration file ...
10/4/2005 11:31:38 PM - Info - Loading device types file...
10/4/2005 11:31:39 PM - Database - Opening up HomeSeer database C:\Automation\Homeseer\homeseer file.mdb
10/4/2005 11:31:39 PM - Info - Loading Devices...
10/4/2005 11:31:39 PM - Load Config - 325 total devices loaded.
10/4/2005 11:31:39 PM - Load Config - Checking device type settings for all devices...
10/4/2005 11:31:39 PM - Load Config - Finished checking device type settings.
10/4/2005 11:31:39 PM - Info - Loading Events...
10/4/2005 11:31:40 PM - Load Config - 264 total events loaded.
10/4/2005 11:31:40 PM - Info - Loading TV Timers...
10/4/2005 11:31:40 PM - Database - HomeSeer configuration database C:\Automation\Homeseer\homeseer file.mdb has been closed.
10/4/2005 11:31:41 PM - Info - HomeSeer version is: 2.0.1972.0
10/4/2005 11:31:41 PM - Info - Initializing phone interface...
10/4/2005 11:31:41 PM - Startup - Checking for available plug-ins
10/4/2005 11:31:41 PM - Info - Found plugin: X10 CM11A/CM12U version: 1.0.1.0
10/4/2005 11:31:41 PM - Info - Found plugin: Applied Digital Ocelot version: 2.1.0.0
10/4/2005 11:31:41 PM - Info - Found plugin: ACT TI103 version: 2.0.0.0
10/4/2005 11:31:41 PM - Info - Found plugin: Touchpad version: 2.0.0.11
10/4/2005 11:31:42 PM - Info - Found plugin: UPB version: 1.0.0.3
10/4/2005 11:31:42 PM - Info - Found plugin: Media Player version: 2.0.0.7
10/4/2005 11:31:43 PM - Startup - Restoring device status
10/4/2005 11:31:43 PM - HSPhone - HomeSeer Phone Web Interface initializing.
10/4/2005 11:31:43 PM - Startup - Initializing Plug-Ins
10/4/2005 11:31:43 PM - Info - Initializing X10 Plug-in: ACT TI103 On COM Port 4
10/4/2005 11:31:43 PM - Info - Initializing Plug-in: ACT TI103
10/4/2005 11:31:43 PM - Info - TI103 Plug-in, Version 2.0.0
10/4/2005 11:31:45 PM - Info - TI103, Communications established at 9600 baud
10/4/2005 11:31:45 PM - Info - Done initializing X10 interface ACT TI103
10/4/2005 11:31:45 PM - Info - Initializing Infrared interface Applied Digital Ocelot on COM 1
10/4/2005 11:31:45 PM - Info - Ocelot Plug-in, Version 2.1.0
10/4/2005 11:31:47 PM - Info - Ocelot Plug-in, Found CPU-XA/Ocelot
10/4/2005 11:31:47 PM - Info - Ocelot IR size: 1024
10/4/2005 11:31:49 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 1
10/4/2005 11:31:49 PM - Info - Ocelot Plug-in startup, Unit found: SECU16I Addr: 2
10/4/2005 11:31:49 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 7
10/4/2005 11:31:49 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 8
10/4/2005 11:31:51 PM - Info - Done initializing infrared interface Applied Digital Ocelot
10/4/2005 11:31:51 PM - Info - Interface UPB is running as a trial
10/4/2005 11:31:51 PM - UPB - RegisterCallback Completed
10/4/2005 11:31:51 PM - Info - Initializing Plug-in: UPB
10/4/2005 11:31:51 PM - UPB - Enter InitIO
10/4/2005 11:31:51 PM - UPB - Attempting to load UPStart export file: C:\Program Files\HomeSeer 2\Config\cranford.upe
10/4/2005 11:31:51 PM - UPB - Parsing UPStart Export file...
10/4/2005 11:31:51 PM - UPB - Checking for suspect UPStart export records...
10/4/2005 11:31:51 PM - UPB - Done Checking for suspect UPStart export records.
10/4/2005 11:31:51 PM - UPB - Done Parsing UPStart Export file.
10/4/2005 11:31:51 PM - UPB - Got LoadHouseCode: $
10/4/2005 11:31:51 PM - UPB - Got LinkHouseCode: %
10/4/2005 11:31:51 PM - UPB - Found LINK: 1 Name:Slow Fade OFF HC: %
10/4/2005 11:31:51 PM - Database Item - Saving Device Slow Fade OFF
10/4/2005 11:31:51 PM - UPB - Ignoring SetIO for %1 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:31:51 PM - UPB - Found LC ID: 6 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:51 PM - UPB - Found LC ID: 7 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:51 PM - UPB - Found LC ID: 4 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:51 PM - UPB - Found LC ID: 5 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:51 PM - UPB - Found LC ID: 1 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:51 PM - UPB - Found LC ID: 2 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:52 PM - UPB - Found LC ID: 3 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:31:52 PM - UPB - Initializing UPB PIM on COM port 7
10/4/2005 11:31:52 PM - UPB - Starting PIM Communication Threads...
10/4/2005 11:31:52 PM - UPB - In ReadSerialThread
10/4/2005 11:31:52 PM - UPB - Done starting Com Threads
10/4/2005 11:31:52 PM - UPB - PIM<--Sending 00FF01 to PIM (Try # 1)
10/4/2005 11:31:52 PM - UPB - In WriteSerialThread
10/4/2005 11:31:53 PM - UPB - PIM-->Received PIM Reg Report (00FF3012340001000100300415000000004E6577204E6574776F726B204 E616D654E657720526F6F6D204E616D652020204E65772050494D2020202 02020202020FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02FFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFF6E0000000000)
10/4/2005 11:31:53 PM - UPB - --- PIM IFORMATION ---
10/4/2005 11:31:53 PM - UPB - Network ID: FF
10/4/2005 11:31:53 PM - UPB - Module ID: 30
10/4/2005 11:31:53 PM - UPB - UPB Options: 00000000
10/4/2005 11:31:53 PM - UPB - UPB Version: 1
10/4/2005 11:31:53 PM - UPB - Manufacturer ID: 01
10/4/2005 11:31:53 PM - UPB - Product ID: 030
10/4/2005 11:31:53 PM - UPB - Firmware Version: 4.15
10/4/2005 11:31:53 PM - UPB - PIM Options: 00000010
10/4/2005 11:31:53 PM - UPB - (Message Mode Enabled)
10/4/2005 11:31:53 PM - UPB - ----------------------
10/4/2005 11:31:53 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 1)
10/4/2005 11:31:53 PM - UPB - Exit InitIO
10/4/2005 11:31:53 PM - Info - Done initializing plug-in UPB
10/4/2005 11:31:53 PM - Error - Unable initialize interface Media Player :Either no license or trial has expired
10/4/2005 11:31:53 PM - Info - Done initializing plug-in Media Player
10/4/2005 11:31:53 PM - Info - Initializing Plug-in: Applied Digital Ocelot
10/4/2005 11:31:53 PM - COM Plugin - Calling InitIO
10/4/2005 11:31:53 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:53 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:53 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:53 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 2)
10/4/2005 11:31:54 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:54 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:54 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:54 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 3)
10/4/2005 11:31:54 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:54 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:54 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:54 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 4)
10/4/2005 11:31:54 PM - Info - Done initializing plug-in Applied Digital Ocelot
10/4/2005 11:31:54 PM - Error - Unable initialize interface HS Commander :Either no license or trial has expired
10/4/2005 11:31:54 PM - Info - Done initializing plug-in HS Commander
10/4/2005 11:31:54 PM - Error - Unable initialize interface mcsSprinklers :Either no license or trial has expired
10/4/2005 11:31:54 PM - Info - Done initializing plug-in mcsSprinklers
10/4/2005 11:31:54 PM - Info - Local IP address is: 192.168.0.4
10/4/2005 11:31:54 PM - Info - Web Server thread started on port 8000
10/4/2005 11:31:55 PM - Startup - Initializing text to speech
10/4/2005 11:31:55 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:55 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:55 PM - Info - Listening for remote speaker connections on port 8742
10/4/2005 11:31:55 PM - Startup - Start remoting
10/4/2005 11:31:55 PM - Startup - Start event processing
10/4/2005 11:31:55 PM - Info - This version of HomeSeer is registered.
10/4/2005 11:31:55 PM - Startup - Starting scheduler
10/4/2005 11:31:55 PM - Startup - Running startup script
10/4/2005 11:31:55 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:55 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 5)
10/4/2005 11:31:55 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:55 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:55 PM - Info - Done with scripting
10/4/2005 11:31:55 PM - Startup - Start up complete.
10/4/2005 11:31:55 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:55 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:31:55 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 1)
10/4/2005 11:31:56 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:56 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:56 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:56 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 2)
10/4/2005 11:31:56 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:56 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:56 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:56 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 3)
10/4/2005 11:31:57 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:57 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:57 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:57 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 4)
10/4/2005 11:31:57 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:57 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:57 PM - Info - Web Server authorized login successful from: 127.0.0.1 User: dcranford
10/4/2005 11:31:57 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:58 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 5)
10/4/2005 11:31:58 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:58 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:58 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:58 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:31:58 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 1)
10/4/2005 11:31:58 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:58 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:59 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:59 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 2)
10/4/2005 11:31:59 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:59 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:31:59 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:31:59 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 3)
10/4/2005 11:31:59 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:31:59 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:00 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:00 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 4)
10/4/2005 11:32:00 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:00 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:00 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:00 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 5)
10/4/2005 11:32:00 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:00 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:01 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:01 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:32:01 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 1)
10/4/2005 11:32:01 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:01 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:01 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:01 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 2)
10/4/2005 11:32:01 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:01 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:02 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:02 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 3)
10/4/2005 11:32:02 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:02 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:02 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:02 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 4)
10/4/2005 11:32:02 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:02 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:03 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:03 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 5)
10/4/2005 11:32:03 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:03 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:03 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:03 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:32:03 PM - UPB - PIM<--Sending 0710AA01FF300F00 to PIM (Try # 1)
10/4/2005 11:32:03 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:03 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:04 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:04 PM - UPB - PIM<--Sending 0710AA01FF300F00 to PIM (Try # 2)
10/4/2005 11:32:04 PM - UPB - PIM-->Received UPB Message 0800AAFF01866464
10/4/2005 11:32:04 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 1 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:32:04 PM - UPB - Processing Direct Message
10/4/2005 11:32:04 PM - UPB - * Controlling device 4 Chnl 0 ID 1 Code $1 Because of State Report
10/4/2005 11:32:04 PM - UPB - Setting status and value for $1
10/4/2005 11:32:04 PM - UPB - Ignoring SetIO for $1 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:32:04 PM - UPB - Ignoring SetIO for $1 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:32:04 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:04 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:05 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:05 PM - UPB - PIM-->Received UPB Message 0800AAFF01866464
10/4/2005 11:32:05 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 1 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:32:05 PM - UPB - Processing Direct Message
10/4/2005 11:32:05 PM - UPB - * Controlling device 4 Chnl 0 ID 1 Code $1 Because of State Report
10/4/2005 11:32:05 PM - UPB - Setting status and value for $1
10/4/2005 11:32:05 PM - UPB - Ignoring SetIO for $1 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:32:05 PM - UPB - Ignoring SetIO for $1 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:32:05 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:07 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:10 PM - UPB - PIM<--Sending 0710AA02FF300E00 to PIM (Try # 1)
10/4/2005 11:32:10 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:10 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:11 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:11 PM - UPB - PIM<--Sending 0710AA02FF300E00 to PIM (Try # 2)
10/4/2005 11:32:11 PM - UPB - PIM-->Received UPB Message 0800AAFF02866463
10/4/2005 11:32:11 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 2 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:32:11 PM - UPB - Processing Direct Message
10/4/2005 11:32:11 PM - UPB - * Controlling device 5 Chnl 0 ID 2 Code $2 Because of State Report
10/4/2005 11:32:11 PM - UPB - Setting status and value for $2
10/4/2005 11:32:11 PM - UPB - Ignoring SetIO for $2 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:32:11 PM - UPB - Ignoring SetIO for $2 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:32:11 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:11 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:11 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:12 PM - UPB - PIM-->Received UPB Message 0800AAFF02866463
10/4/2005 11:32:12 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 2 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:32:12 PM - UPB - Processing Direct Message
10/4/2005 11:32:12 PM - UPB - * Controlling device 5 Chnl 0 ID 2 Code $2 Because of State Report
10/4/2005 11:32:12 PM - UPB - Setting status and value for $2
10/4/2005 11:32:12 PM - UPB - Ignoring SetIO for $2 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:32:12 PM - UPB - Ignoring SetIO for $2 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:32:12 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:14 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:17 PM - UPB - PIM<--Sending 0710AA03FF300D00 to PIM (Try # 1)
10/4/2005 11:32:17 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:17 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:18 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:18 PM - UPB - PIM<--Sending 0710AA03FF300D00 to PIM (Try # 2)
10/4/2005 11:32:18 PM - UPB - PIM-->Received UPB Message 0800AAFF038600C6
10/4/2005 11:32:18 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 3 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 0
10/4/2005 11:32:18 PM - UPB - Processing Direct Message
10/4/2005 11:32:18 PM - UPB - * Controlling device 6 Chnl 0 ID 3 Code $5 Because of State Report
10/4/2005 11:32:18 PM - UPB - Setting status and value for $5
10/4/2005 11:32:18 PM - UPB - Ignoring SetIO for $5 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:32:18 PM - UPB - Ignoring SetIO for $5 Cmd: 3 Bright: 0 because it was generated internally
10/4/2005 11:32:18 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:19 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:32:19 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:32:19 PM - UPB - PIM-->Received UPB Message 0800AAFF038600C6
10/4/2005 11:32:19 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 3 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 0
10/4/2005 11:32:19 PM - UPB - Processing Direct Message
10/4/2005 11:32:19 PM - UPB - * Controlling device 6 Chnl 0 ID 3 Code $5 Because of State Report
10/4/2005 11:32:19 PM - UPB - Setting status and value for $5
10/4/2005 11:32:19 PM - UPB - Ignoring SetIO for $5 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:32:19 PM - UPB - Ignoring SetIO for $5 Cmd: 3 Bright: 0 because it was generated internally
10/4/2005 11:32:19 PM - UPB - Done Processing Direct Message
10/4/2005 11:32:21 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:32:23 PM - Info - Speaker client connected from: 127.0.0.1
10/4/2005 11:34:20 PM - Database - Creating new database, result is Configuration Database Created.
10/4/2005 11:34:20 PM - Database - Saving Devices...
10/4/2005 11:34:20 PM - Database - Opening up HomeSeer database C:\Documents and Settings\David\My Documents\HomeSeer.mdb
10/4/2005 11:34:20 PM - Database - Opening up HomeSeer database C:\Documents and Settings\David\My Documents\HomeSeer.mdb
10/4/2005 11:34:22 PM - Database - Saving Events...
10/4/2005 11:34:31 PM - Database - Saving TV Timers...
10/4/2005 11:34:31 PM - Database - HomeSeer configuration database C:\Documents and Settings\David\My Documents\HomeSeer.mdb has been closed.

[DC]

Sorry, I didn't know how to save the log to a file I could attach so I cut and pasted it. The old device name was Guest Bedroom 1:Lamp 1.

I changed it to Guest Bedroom 1:Changed in UPStart but HS still shows Lamp 1.

[DC]

I deleted "Lamp 1" and restarted HS. Now it shows the device named "Changed".


10/4/2005 11:38:45 PM - Startup - Loading configuration file ...
10/4/2005 11:38:46 PM - Info - Loading device types file...
10/4/2005 11:38:46 PM - Database - Opening up HomeSeer database C:\Documents and Settings\David\My Documents\HomeSeer.mdb
10/4/2005 11:38:46 PM - Info - Loading Devices...
10/4/2005 11:38:46 PM - Load Config - 324 total devices loaded.
10/4/2005 11:38:46 PM - Load Config - Checking device type settings for all devices...
10/4/2005 11:38:46 PM - Load Config - Finished checking device type settings.
10/4/2005 11:38:46 PM - Info - Loading Events...
10/4/2005 11:38:47 PM - Load Config - 264 total events loaded.
10/4/2005 11:38:47 PM - Info - Loading TV Timers...
10/4/2005 11:38:47 PM - Database - HomeSeer configuration database C:\Documents and Settings\David\My Documents\HomeSeer.mdb has been closed.
10/4/2005 11:38:48 PM - Info - HomeSeer version is: 2.0.1972.0
10/4/2005 11:38:48 PM - Info - Initializing phone interface...
10/4/2005 11:38:48 PM - Startup - Checking for available plug-ins
10/4/2005 11:38:48 PM - Info - Found plugin: X10 CM11A/CM12U version: 1.0.1.0
10/4/2005 11:38:48 PM - Info - Found plugin: Applied Digital Ocelot version: 2.1.0.0
10/4/2005 11:38:48 PM - Info - Found plugin: ACT TI103 version: 2.0.0.0
10/4/2005 11:38:48 PM - Info - Found plugin: Touchpad version: 2.0.0.11
10/4/2005 11:38:49 PM - Info - Found plugin: UPB version: 1.0.0.3
10/4/2005 11:38:49 PM - Info - Found plugin: Media Player version: 2.0.0.7
10/4/2005 11:38:50 PM - Startup - Restoring device status
10/4/2005 11:38:50 PM - HSPhone - HomeSeer Phone Web Interface initializing.
10/4/2005 11:38:50 PM - Startup - Initializing Plug-Ins
10/4/2005 11:38:50 PM - Info - Initializing X10 Plug-in: ACT TI103 On COM Port 4
10/4/2005 11:38:50 PM - Info - Initializing Plug-in: ACT TI103
10/4/2005 11:38:50 PM - Info - TI103 Plug-in, Version 2.0.0
10/4/2005 11:38:52 PM - Info - TI103, Communications established at 9600 baud
10/4/2005 11:38:52 PM - Info - Done initializing X10 interface ACT TI103
10/4/2005 11:38:52 PM - Info - Initializing Infrared interface Applied Digital Ocelot on COM 1
10/4/2005 11:38:52 PM - Info - Ocelot Plug-in, Version 2.1.0
10/4/2005 11:38:54 PM - Info - Ocelot Plug-in, Found CPU-XA/Ocelot
10/4/2005 11:38:54 PM - Info - Ocelot IR size: 1024
10/4/2005 11:38:56 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 1
10/4/2005 11:38:56 PM - Info - Ocelot Plug-in startup, Unit found: SECU16I Addr: 2
10/4/2005 11:38:56 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 7
10/4/2005 11:38:56 PM - Info - Ocelot Plug-in startup, Unit found: SECU16 Addr: 8
10/4/2005 11:38:58 PM - Info - Done initializing infrared interface Applied Digital Ocelot
10/4/2005 11:38:58 PM - Info - Interface UPB is running as a trial
10/4/2005 11:38:58 PM - UPB - RegisterCallback Completed
10/4/2005 11:38:58 PM - Info - Initializing Plug-in: UPB
10/4/2005 11:38:58 PM - UPB - Enter InitIO
10/4/2005 11:38:58 PM - UPB - Attempting to load UPStart export file: C:\Program Files\HomeSeer 2\Config\cranford.upe
10/4/2005 11:38:58 PM - UPB - Parsing UPStart Export file...
10/4/2005 11:38:58 PM - UPB - Checking for suspect UPStart export records...
10/4/2005 11:38:58 PM - UPB - Done Checking for suspect UPStart export records.
10/4/2005 11:38:58 PM - UPB - Done Parsing UPStart Export file.
10/4/2005 11:38:58 PM - UPB - Got LoadHouseCode: $
10/4/2005 11:38:58 PM - UPB - Got LinkHouseCode: %
10/4/2005 11:38:58 PM - UPB - Found LINK: 1 Name:Slow Fade OFF HC: %
10/4/2005 11:38:58 PM - Database Item - Saving Device Slow Fade OFF
10/4/2005 11:38:58 PM - UPB - Ignoring SetIO for %1 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:38:58 PM - UPB - Found LC ID: 6 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:58 PM - UPB - Found LC ID: 7 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:58 PM - UPB - Found LC ID: 4 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:58 PM - UPB - Found LC ID: 5 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:58 PM - UPB - Created LC ID: 1 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:58 PM - Database Item - Saving Device Changed
10/4/2005 11:38:59 PM - UPB - Found LC ID: 2 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:59 PM - UPB - Found LC ID: 3 CH: 0 NCH: 1 KIND: 3 HC: $
10/4/2005 11:38:59 PM - UPB - Initializing UPB PIM on COM port 7
10/4/2005 11:38:59 PM - UPB - Starting PIM Communication Threads...
10/4/2005 11:38:59 PM - UPB - Done starting Com Threads
10/4/2005 11:38:59 PM - UPB - In ReadSerialThread
10/4/2005 11:38:59 PM - UPB - In WriteSerialThread
10/4/2005 11:38:59 PM - UPB - PIM<--Sending 00FF01 to PIM (Try # 1)
10/4/2005 11:39:00 PM - UPB - PIM-->Received PIM Reg Report (00FF3012340001000100300415000000004E6577204E6574776F726B204 E616D654E657720526F6F6D204E616D652020204E65772050494D2020202 02020202020FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02FFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFF700000000000)
10/4/2005 11:39:00 PM - UPB - --- PIM IFORMATION ---
10/4/2005 11:39:00 PM - UPB - Network ID: FF
10/4/2005 11:39:00 PM - UPB - Module ID: 30
10/4/2005 11:39:00 PM - UPB - UPB Options: 00000000
10/4/2005 11:39:00 PM - UPB - UPB Version: 1
10/4/2005 11:39:00 PM - UPB - Manufacturer ID: 01
10/4/2005 11:39:00 PM - UPB - Product ID: 030
10/4/2005 11:39:00 PM - UPB - Firmware Version: 4.15
10/4/2005 11:39:00 PM - UPB - PIM Options: 00000010
10/4/2005 11:39:00 PM - UPB - (Message Mode Enabled)
10/4/2005 11:39:00 PM - UPB - ----------------------
10/4/2005 11:39:00 PM - UPB - Exit InitIO
10/4/2005 11:39:00 PM - Info - Done initializing plug-in UPB
10/4/2005 11:39:00 PM - Error - Unable initialize interface Media Player :Either no license or trial has expired
10/4/2005 11:39:00 PM - Info - Done initializing plug-in Media Player
10/4/2005 11:39:00 PM - Info - Initializing Plug-in: Applied Digital Ocelot
10/4/2005 11:39:00 PM - COM Plugin - Calling InitIO
10/4/2005 11:39:00 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 1)
10/4/2005 11:39:00 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:00 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:00 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:00 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 2)
10/4/2005 11:39:01 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:01 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:01 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:01 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 3)
10/4/2005 11:39:01 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:01 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:01 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:01 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 4)
10/4/2005 11:39:02 PM - Info - Done initializing plug-in Applied Digital Ocelot
10/4/2005 11:39:02 PM - Error - Unable initialize interface HS Commander :Either no license or trial has expired
10/4/2005 11:39:02 PM - Info - Done initializing plug-in HS Commander
10/4/2005 11:39:02 PM - Error - Unable initialize interface mcsSprinklers :Either no license or trial has expired
10/4/2005 11:39:02 PM - Info - Done initializing plug-in mcsSprinklers
10/4/2005 11:39:02 PM - Info - Local IP address is: 192.168.0.4
10/4/2005 11:39:02 PM - Info - Web Server thread started on port 8000
10/4/2005 11:39:02 PM - Startup - Initializing text to speech
10/4/2005 11:39:02 PM - Info - Listening for remote speaker connections on port 8742
10/4/2005 11:39:02 PM - Startup - Start remoting
10/4/2005 11:39:02 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:02 PM - Startup - Start event processing
10/4/2005 11:39:02 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:02 PM - Info - This version of HomeSeer is registered.
10/4/2005 11:39:02 PM - Startup - Starting scheduler
10/4/2005 11:39:02 PM - Startup - Running startup script
10/4/2005 11:39:02 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:02 PM - UPB - PIM<--Sending 0710AA06FF300A00 to PIM (Try # 5)
10/4/2005 11:39:02 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:02 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:02 PM - Info - Done with scripting
10/4/2005 11:39:02 PM - Startup - Start up complete.
10/4/2005 11:39:03 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:03 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:39:03 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 1)
10/4/2005 11:39:03 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:03 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:03 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:03 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 2)
10/4/2005 11:39:03 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:03 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:04 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:04 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 3)
10/4/2005 11:39:04 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:04 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:04 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:04 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 4)
10/4/2005 11:39:04 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:04 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:05 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:05 PM - UPB - PIM<--Sending 0710AA07FF300900 to PIM (Try # 5)
10/4/2005 11:39:05 PM - Info - Web Server authorized login successful from: 127.0.0.1 User: dcranford
10/4/2005 11:39:05 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:05 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:05 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:05 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:39:05 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 1)
10/4/2005 11:39:05 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:05 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:06 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:06 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 2)
10/4/2005 11:39:06 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:06 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:06 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:06 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 3)
10/4/2005 11:39:06 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:06 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:07 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:07 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 4)
10/4/2005 11:39:07 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:07 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:07 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:07 PM - UPB - PIM<--Sending 0710AA04FF300C00 to PIM (Try # 5)
10/4/2005 11:39:07 PM - Info - Speaker client connected from: 127.0.0.1
10/4/2005 11:39:07 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:07 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:08 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:08 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:39:08 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 1)
10/4/2005 11:39:08 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:08 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:08 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:08 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 2)
10/4/2005 11:39:08 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:08 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:09 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:09 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 3)
10/4/2005 11:39:09 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:09 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:09 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:09 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 4)
10/4/2005 11:39:09 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:09 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:10 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:10 PM - UPB - PIM<--Sending 0710AA05FF300B00 to PIM (Try # 5)
10/4/2005 11:39:10 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:10 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:10 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:10 PM - UPB - ** Retry count exceeded, Can't send Msg
10/4/2005 11:39:10 PM - UPB - PIM<--Sending 0710AA01FF300F00 to PIM (Try # 1)
10/4/2005 11:39:10 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:10 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:11 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:11 PM - UPB - PIM<--Sending 0710AA01FF300F00 to PIM (Try # 2)
10/4/2005 11:39:11 PM - UPB - PIM-->Received UPB Message 0800AAFF01866464
10/4/2005 11:39:11 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 1 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:39:11 PM - UPB - Processing Direct Message
10/4/2005 11:39:11 PM - UPB - * Controlling device 4 Chnl 0 ID 1 Code $1 Because of State Report
10/4/2005 11:39:11 PM - UPB - Setting status and value for $1
10/4/2005 11:39:11 PM - UPB - Ignoring SetIO for $1 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:39:11 PM - UPB - Ignoring SetIO for $1 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:39:11 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:11 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:11 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:12 PM - UPB - PIM-->Received UPB Message 0800AAFF01866464
10/4/2005 11:39:12 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 1 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:39:12 PM - UPB - Processing Direct Message
10/4/2005 11:39:12 PM - UPB - * Controlling device 4 Chnl 0 ID 1 Code $1 Because of State Report
10/4/2005 11:39:12 PM - UPB - Setting status and value for $1
10/4/2005 11:39:12 PM - UPB - Ignoring SetIO for $1 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:39:12 PM - UPB - Ignoring SetIO for $1 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:39:12 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:14 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:17 PM - UPB - PIM<--Sending 0710AA02FF300E00 to PIM (Try # 1)
10/4/2005 11:39:17 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:17 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:18 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:18 PM - UPB - PIM<--Sending 0710AA02FF300E00 to PIM (Try # 2)
10/4/2005 11:39:18 PM - UPB - PIM-->Received UPB Message 0800AAFF02866463
10/4/2005 11:39:18 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 2 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:39:18 PM - UPB - Processing Direct Message
10/4/2005 11:39:18 PM - UPB - * Controlling device 5 Chnl 0 ID 2 Code $2 Because of State Report
10/4/2005 11:39:18 PM - UPB - Setting status and value for $2
10/4/2005 11:39:18 PM - UPB - Ignoring SetIO for $2 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:39:18 PM - UPB - Ignoring SetIO for $2 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:39:18 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:19 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:19 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:19 PM - UPB - PIM-->Received UPB Message 0800AAFF02866463
10/4/2005 11:39:19 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 2 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 100
10/4/2005 11:39:19 PM - UPB - Processing Direct Message
10/4/2005 11:39:19 PM - UPB - * Controlling device 5 Chnl 0 ID 2 Code $2 Because of State Report
10/4/2005 11:39:19 PM - UPB - Setting status and value for $2
10/4/2005 11:39:19 PM - UPB - Ignoring SetIO for $2 Cmd: 19 Bright: 100 because it was generated internally
10/4/2005 11:39:19 PM - UPB - Ignoring SetIO for $2 Cmd: 2 Bright: 0 because it was generated internally
10/4/2005 11:39:19 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:21 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:24 PM - UPB - PIM<--Sending 0710AA03FF300D00 to PIM (Try # 1)
10/4/2005 11:39:24 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:24 PM - UPB - Waiting for ACK/NAK from PIM
10/4/2005 11:39:25 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:25 PM - UPB - PIM<--Sending 0710AA03FF300D00 to PIM (Try # 2)
10/4/2005 11:39:25 PM - UPB - PIM-->Received UPB Message 0800AAFF038600C6
10/4/2005 11:39:25 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 3 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 0
10/4/2005 11:39:25 PM - UPB - Processing Direct Message
10/4/2005 11:39:25 PM - UPB - * Controlling device 6 Chnl 0 ID 3 Code $5 Because of State Report
10/4/2005 11:39:25 PM - UPB - Setting status and value for $5
10/4/2005 11:39:25 PM - UPB - Ignoring SetIO for $5 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:39:25 PM - UPB - Ignoring SetIO for $5 Cmd: 3 Bright: 0 because it was generated internally
10/4/2005 11:39:25 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:26 PM - UPB - PIM-->Received PIM Accept
10/4/2005 11:39:26 PM - UPB - PIM-->Received PIM NoAck
10/4/2005 11:39:26 PM - UPB - PIM-->Received UPB Message 0800AAFF038600C6
10/4/2005 11:39:26 PM - UPB - Direct Pkt Rep Req: 0 (None) D Len: 8 Ack Req: 0 (None) Trns Cnt: 0 Seq Num: 0 Net ID: 170 Src ID: 3 Dest ID: 255 D Bytes: 1 Msg: !( 4)Core Reports-( 6)Device State! V 0
10/4/2005 11:39:26 PM - UPB - Processing Direct Message
10/4/2005 11:39:26 PM - UPB - * Controlling device 6 Chnl 0 ID 3 Code $5 Because of State Report
10/4/2005 11:39:26 PM - UPB - Setting status and value for $5
10/4/2005 11:39:26 PM - UPB - Ignoring SetIO for $5 Cmd: 19 Bright: 0 because it was generated internally
10/4/2005 11:39:26 PM - UPB - Ignoring SetIO for $5 Cmd: 3 Bright: 0 because it was generated internally
10/4/2005 11:39:26 PM - UPB - Done Processing Direct Message
10/4/2005 11:39:28 PM - UPB - Waiting for ACK/NAK from PIM

[Oman]

I'll look at the code tomorrow and see if I can figure out what is happening. It is finding the matching device just fine, and then it should update the database fields. When I run here I get additional database messages that you are not getting. Also your PIM is not getting ACKs from your devices so you should turn off the retry option in the plugin. Hopefully there will be a softare fix for this as soon as PCS figures out what is happening.