New Problem

[russj58]

Hi, I recently added an EZFlora Irrigation controller and an I/O link device.
I have seen in recent posts the EZFlora is not supported. I deleted the ezy Flora but now get an error everytime an event is exicuted or I manually change status via the status page. There are no errors when the plugin is simply tracking manual device changes, ie, manually turning on or off a light switch.

Included is a snapshot from the log file and corresponding sections from the Insteon log file.

Log file entries:
4/17/2011 6:19:00 AM - Event - Event Trigger "Oscars on"
4/17/2011 6:19:00 AM - Device Control - Device: Front Entry Oscar Tank (\10) ON
4/17/2011 6:19:00 AM - Insteon - ** An error occurred in this plug-in. The details have been written to the log file - D:\Program Files\HomeSeer HSPRO\Config\Insteon Error Report.Log
4/17/2011 6:19:00 AM - Insteon - ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
4/17/2011 2:12:19 PM - Device Control - Device: Front Entry Poarch Light (\18) ON
4/17/2011 2:12:19 PM - Insteon - ** An error occurred in this plug-in. The details have been written to the log file - D:\Program Files\HomeSeer HSPRO\Config\Insteon Error Report.Log
4/17/2011 2:12:19 PM - Insteon - ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
Error file:

4/17/2011 6:19:00 AM - Processing SetIOEx for device - \10 Cmd: 2 Bright: 0 Data1: 0 Data2: 0
4/17/2011 6:19:00 AM - Setting status and value for device \10. Old status:3 Old Value:0, New Status:2 New Value:100
4/17/2011 6:19:00 AM - ResourceManager::RequestExclusive for Resource 1
4/17/2011 6:19:00 AM - ResourceManager::RequestExclusive acquired for Resource 1
4/17/2011 6:19:00 AM - Sending command 02 62 06 86 62 0A 11 FF to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/17/2011 6:19:00 AM - ..Got RF PLM Response 02 62 06 86 62 0A 11 FF 06
4/17/2011 6:19:00 AM - ResourceManager::ReleaseExclusive for Resource 1
4/17/2011 6:19:00 AM - ***:Error in TransmitDeviceMsg: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'. -- Details System.MissingMethodException: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'.
at InsteonModule.WaitForInsteonRaw(String[] Cmd, Int32& MatchOn)
at InsteonModule.SendandWaitForCmd(Int16 DevIndex, String Cmd, String[] RspCmd, String& Result, Int32& MatchOn)
at InsteonModule.TransmitDeviceMsg(TransmitMsgType Msg)
4/17/2011 6:19:00 AM - Received STX 0x50 (Raw Insteon Rec):01 06 86 62 13 21 36 26 11 FF - Event: New msg for RF PLM, Src[06.86.62] Dst[13.21.36] {Ack/Dir} Cmd1: 11 Cmd2: FF
4/17/2011 6:19:00 AM - Received a Direct ACK from 06.86.62
4/17/2011 2:12:19 PM - Processing SetIOEx for device - \18 Cmd: 2 Bright: 0 Data1: 0 Data2: 0
4/17/2011 2:12:19 PM - Setting status and value for device \18. Old status:3 Old Value:0, New Status:2 New Value:100
4/17/2011 2:12:19 PM - ResourceManager::RequestExclusive for Resource 1
4/17/2011 2:12:19 PM - ResourceManager::RequestExclusive acquired for Resource 1
4/17/2011 2:12:19 PM - Sending command 02 62 14 C2 B1 0A 11 FF to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/17/2011 2:12:19 PM - ..Got RF PLM Response 02 62 14 C2 B1 0A 11 FF 06
4/17/2011 2:12:19 PM - ResourceManager::ReleaseExclusive for Resource 1
4/17/2011 2:12:19 PM - ***:Error in TransmitDeviceMsg: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'. -- Details System.MissingMethodException: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'.
at InsteonModule.WaitForInsteonRaw(String[] Cmd, Int32& MatchOn)
at InsteonModule.SendandWaitForCmd(Int16 DevIndex, String Cmd, String[] RspCmd, String& Result, Int32& MatchOn)
at InsteonModule.TransmitDeviceMsg(TransmitMsgType Msg)
--------*End Pre-Error Log*--------------
--------*Start D:\Program Files\HomeSeer HSPRO\Config\Insteon.ini*--------------
[Config]
GroupBaseCode=[
LastInterfaceAddress=13.21.36
NumDevices=15
DeviceBaseCode=\
[Device 1]
DeviceID=14.C8.30
DeviceName=Ceiling Light
DeviceLocation=Front Entry
PollingInterval=0
DeviceType=011B
FirmwareVer=36
DatabaseDelta=42
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=136,DefaultOnLevel=254 ,OnLEDMask1=0,OnLEDMask2=0,OnLEDMask3=0,OnLEDMask4=0,OnLEDMa sk5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLEDMask1=0,O ffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask5=0,OffLE DMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButtons=0,OpFl ags1=0
GroupLinkAddress 1=1
GroupLinkAddress 2=2
GroupLinkAddress 3=3
GroupLinkAddress 4=4
GroupLinkAddress 5=5
GroupLinkAddress 6=6
LastContact=4/12/2011 7:05:22 PM
ChannelName1=
ChannelName2=
ChannelName3=
ChannelName4=
ChannelName5=
ChannelName6=
NoChannelSync=0
NumLinks=13
Link 1=A2 01 13 21 36 FF 1F 01 15
Link 2=E2 01 13 21 36 FF 1F 01 16
Link 3=E2 03 13 21 36 FF 1F 03 17
Link 4=E2 04 13 21 36 FF 1F 04 18
Link 5=E2 05 13 21 36 FF 1F 05 19
Link 6=E2 06 13 21 36 FF 1F 06 20
Link 7=E2 08 13 21 36 FF 1F 08 21
Link 8=A2 FE 13 21 36 FF 1F 01 22
Link 9=A2 02 13 21 36 FF 1F 03 23
Link 10=A2 03 13 21 36 FF 1F 04 24
Link 11=A2 04 13 21 36 FF 1F 05 25
Link 12=A2 05 13 21 36 FF 1F 06 26
Link 13=A2 06 13 21 36 FF 1F 08 27
RecentDatabaseDelta=43
TotalInteractions=11
FailedInteractions=0
SyncLinkedDevices=0
[Device 2]
DeviceID=14.E7.DC
DeviceName=Ceiling Lights
DeviceLocation=Kitchen
PollingInterval=0
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=41
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 5
Link 2=E2 01 13 21 36 FF 1F 01 6
Link 3=A2 FE 13 21 36 FF 1F 01 7
RecentDatabaseDelta=41
TotalInteractions=4
FailedInteractions=0
[Device 3]
DeviceID=14.EB.62
DeviceName=Sink Light
DeviceLocation=Kitchen
PollingInterval=0
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=9
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 5
Link 2=E2 01 13 21 36 FF 1F 01 6
Link 3=A2 FE 13 21 36 FF 1F 01 7
RecentDatabaseDelta=9
TotalInteractions=51
FailedInteractions=0
[Device 4]
DeviceID=14.EA.68
DeviceName=Patio Lights
DeviceLocation=Living Room
PollingInterval=0
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=14
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 4
Link 2=E2 01 13 21 36 FF 1F 01 5
Link 3=A2 FE 13 21 36 FF 1F 01 6
RecentDatabaseDelta=14
TotalInteractions=1
FailedInteractions=0
[Device 5]
DeviceID=06.86.62
DeviceName=Oscar Tank
DeviceLocation=Front Entry
PollingInterval=0
DeviceType=0209
FirmwareVer=28
DatabaseDelta=10
LinksDownloaded=1
Protocol=1
EEValues=
LastContact=4/12/2011 7:26:52 PM
NumLinks=2
Link 1=A2 01 13 21 36 FE FF 00 3
Link 2=A2 FE 13 21 36 FF 1F 01 4
RecentDatabaseDelta=10
TotalInteractions=135
FailedInteractions=0
SyncLinkedDevices=0
[Device 6]
DeviceID=14.E7.D5
DeviceName=Ceiling Fan
DeviceLocation=Dining Room
PollingInterval=0
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=10
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
RecentDatabaseDelta=10
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 5
Link 2=E2 01 13 21 36 FF 1F 01 6
Link 3=A2 FE 13 21 36 FF 1F 01 7
TotalInteractions=5
FailedInteractions=0
[Device 7]
DeviceID=13.8C.AC
DeviceName=Ceiling Lights - Master
DeviceLocation=Living Room
PollingInterval=0
DeviceType=0119
FirmwareVer=38
DatabaseDelta=11
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=128,DefaultOnLevel=254 ,OpFlags1=32
LastContact=4/9/2011 7:42:05 PM
NumLinks=5
Link 1=E2 01 16 0F FF FE 1C 00 2
Link 2=A2 01 16 0F FF FE 1C 00 3
Link 3=A2 01 13 21 36 FE 1C 00 8
Link 4=E2 01 13 21 36 FF 1F 01 9
Link 5=A2 FE 13 21 36 FF 1F 01 10
RecentDatabaseDelta=0
TotalInteractions=42
FailedInteractions=10
[Device 8]
DeviceID=16.0F.FF
DeviceName=Ceiling Lights - Slave
DeviceLocation=Living Room
PollingInterval=0
DeviceType=0119
FirmwareVer=38
DatabaseDelta=57
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=128,DefaultOnLevel=254 ,OpFlags1=32
LastContact=4/9/2011 7:42:06 PM
RecentDatabaseDelta=58
NumLinks=5
Link 1=A2 01 13 8C AC FE 1C 00 1
Link 2=E2 01 13 8C AC FE 1C 00 2
Link 3=A2 01 13 21 36 FE 1C 00 7
Link 4=E2 01 13 21 36 FF 1F 01 8
Link 5=A2 FE 13 21 36 FF 1F 01 9
TotalInteractions=28
FailedInteractions=0
[Device 9]
DeviceID=13.8C.B9
DeviceName=Ceiling Light - Master
DeviceLocation=Dining Room
PollingInterval=0
DeviceType=0119
FirmwareVer=38
DatabaseDelta=100
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=136,DefaultOnLevel=255 ,OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=4
Link 1=A2 01 13 8B E6 FF 1C 00 2
Link 2=A2 01 13 21 36 FF 1C 00 6
Link 3=E2 01 13 21 36 FF 1F 01 7
Link 4=A2 FE 13 21 36 FF 1F 01 8
RecentDatabaseDelta=100
TotalInteractions=69
FailedInteractions=0
[Device 10]
DeviceID=13.8B.E6
DeviceName=Celing Lights - Slave
DeviceLocation=Dining Room
PollingInterval=0
DeviceType=0119
FirmwareVer=38
DatabaseDelta=3
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=136,DefaultOnLevel=247 ,OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=5
Link 1=A2 01 13 8C B9 F7 1C 00 1
Link 2=E2 01 13 8C B9 F7 1C 00 2
Link 3=A2 01 13 21 36 F7 1C 00 3
RecentDatabaseDelta=4
Link 4=E2 01 13 21 36 FF 1F 01 4
Link 5=A2 FE 13 21 36 FF 1F 01 5
TotalInteractions=11
FailedInteractions=0
[Device 11]
DeviceID=13.BC.23
DeviceName=Lights - Master
DeviceLocation=Hall
PollingInterval=0
DeviceType=011E
FirmwareVer=39
DatabaseDelta=5
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=128,DefaultOnLevel=254 ,OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=5
Link 1=E2 01 13 BF 49 FE 1C 00 1
Link 2=A2 01 13 BF 49 FE 1C 00 2
Link 3=A2 01 13 21 36 FE 1C 00 3
RecentDatabaseDelta=5
Link 4=E2 01 13 21 36 FF 1F 01 4
Link 5=A2 FE 13 21 36 FF 1F 01 5
TotalInteractions=83
FailedInteractions=1
[Device 12]
DeviceID=13.BF.49
DeviceName=Lights - Slave
DeviceLocation=Hall
PollingInterval=0
DeviceType=011E
FirmwareVer=39
DatabaseDelta=8
LinksDownloaded=1
Protocol=2
EEValues=DefaultRampRate=28,ResumeDim=128,DefaultOnLevel=254 ,OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=5
Link 1=A2 01 13 BC 23 FE 1C 00 1
Link 2=E2 01 13 BC 23 FE 1C 00 2
Link 3=A2 01 13 21 36 FE 1C 00 3
RecentDatabaseDelta=8
Link 4=E2 01 13 21 36 FF 1F 01 4
Link 5=A2 FE 13 21 36 FF 1F 01 5
TotalInteractions=19
FailedInteractions=0
[Device 13]
DeviceID=14.C2.B1
DeviceName=Poarch Light
DeviceLocation=Front Entry
PollingInterval=0
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=3
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 1
RecentDatabaseDelta=3
Link 2=E2 01 13 21 36 FF 1F 01 2
Link 3=A2 FE 13 21 36 FF 1F 01 3
TotalInteractions=1
FailedInteractions=0
[Device 14]
DeviceID=17.85.5D
DeviceName=Driveway Lights
DeviceLocation=Outside
PollingInterval=0
DeviceType=0214
FirmwareVer=38
DatabaseDelta=3
LinksDownloaded=1
Protocol=2
EEValues=OpFlags1=32
LastContact=4/9/2011 2:52:27 PM
NumLinks=3
Link 1=A2 01 13 21 36 FF 00 00 1
RecentDatabaseDelta=3
Link 2=E2 01 13 21 36 FF 1F 01 2
Link 3=A2 FE 13 21 36 FF 1F 01 3
TotalInteractions=13
FailedInteractions=0
[0400]
DeviceDescription=Device Type 0400
CanRespond=1
CanDim=0
HasLocalControl=1
NumGroups=1
GroupName1=Load
[Device 15]
DeviceID=17.71.01
DeviceName=Opener
DeviceLocation=Garage
DeviceType=0700
FirmwareVer=36
EEValues=
DatabaseDelta=-1
RecentDatabaseDelta=
PollingInterval=0
LastContact=4/11/2011 7:01:21 PM
LinksDownloaded=0
NumLinks=0
Protocol=0
TotalInteractions=2667
FailedInteractions=0
NoChannelSync=0
AutoShutoff=0
--------*End D:\Program Files\HomeSeer HSPRO\Config\Insteon.ini*--------------
I am using the current 1.5.5.0 version of the plug-in.

Thanks,
Russ

[mnsandler]

you need to install SP2 (service pack 2) for .net framework 2.0

[russj58]

XP Embedde

I am running XP Embedded on a Pro 100 controller from Homeseer, XP Embedded V 2002, SP 2.
None of the Net Frameworks SP 2 will load on that machine.
Any Ideas?

[mnsandler]

I am running XP Embedded on a Pro 100 controller from Homeseer, XP Embedded V 2002, SP 2.
None of the Net Frameworks SP 2 will load on that machine.
Any Ideas?

what you are trying to load?

[mnsandler]

how about installing
The .NET 3.5 SP1. it includes .net 2.0 sp2

[russj58]

I have tried all 3 versions from this web site:

http://www.microsoft.com/downloads/e...displaylang=en

Non of them will work on my operating system (Windows XP Embeded, 2002, service Pack 2)

It is on the Pro 100 Controller from Homeseer. I have disabled the write protect for Drive C: (HSPotect)

[russj58]

Tried 3.5 as well, they all say "an eror occured during installation, removing all files" and wont install

[mnsandler]

i'll have to refer you to the Pro 100 forum for additional help with this installation. I'm not familar with the Pro 100

http://board.homeseer.com/forumdisplay.php?f=894

[russj58]

I have upgraded my pro-100 to the latest version which includes .net framework 3.0. What is strange is that when looking at installed software it shows both V 2.0 SP1 and V 3.0 SP1.

I was able to add a device but get an error every time I try to control it.

Here is the error log:

Insteon Plug-in Error Log Generated 4/25/2011 8:49:37 PM
-----------*Error Message*----------------
Error: Error in TransmitDeviceMsg: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'. -- Details System.MissingMethodException: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'.
at InsteonModule.WaitForInsteonRaw(String[] Cmd, Int32& MatchOn)
at InsteonModule.SendandWaitForCmd(Int16 DevIndex, String Cmd, String[] RspCmd, String& Result, Int32& MatchOn)
at InsteonModule.TransmitDeviceMsg(TransmitMsgType Msg) -- 4/25/2011 8:49:37 PM
--------*Initialization Log*--------------
4/25/2011 8:43:25 PM - Host System: HomeSeer 2.5.0.20
4/25/2011 8:43:25 PM - Plugin: HSPI_Insteon.DLL - Hybrid Plug-In v1.5.5.0 In PLM Mode
4/25/2011 8:43:25 PM - RegisterCallback Completed
4/25/2011 8:43:25 PM - Enter InitIO
4/25/2011 8:43:25 PM - Enter InitPlugin
4/25/2011 8:43:25 PM - Global initialization of plug-in required, starting up.
4/25/2011 8:43:25 PM - Initializing Insteon hardware interface...
4/25/2011 8:43:25 PM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/25/2011 8:43:25 PM - ..Got Interface Response 02 60 13 21 36 03 11 92 06
4/25/2011 8:43:25 PM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/25/2011 8:43:25 PM - ..Got Interface Response 02 60 13 21 36 03 11 92 06
4/25/2011 8:43:25 PM - RF PLM contacted on COM1 with an Insteon address of 13.21.36 and firmware version 92
4/25/2011 8:43:25 PM - Sending command 02 6B 48 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/25/2011 8:43:25 PM - ..Got RF PLM Response 02 6B 48 06
4/25/2011 8:43:25 PM - Insteon hardware interface initialized.
4/25/2011 8:43:25 PM - In TransmitMessageThread
4/25/2011 8:43:25 PM - In ProcessInBufferThread
4/25/2011 8:43:25 PM - I/O(Insteon Protocol) Interface Initializing...
4/25/2011 8:43:25 PM - In CreateDevices
4/25/2011 8:43:25 PM - Reloading 1 Insteon device information tables...
4/25/2011 8:43:25 PM - [HCM] There are existing 'DeviceBaseCode' class HomeSeer devices currently using the previously allocated base house code of: '\'.
4/25/2011 8:43:25 PM - 1 Matching HS device records were found and updated for the Insteon device database.
4/25/2011 8:43:25 PM - [HCM] There are existing 'GroupBaseCode' class HomeSeer devices currently using the previously allocated base house code of: '['.
4/25/2011 8:43:25 PM - 0 Matching HS device records were found and updated for the Insteon group database.
4/25/2011 8:43:25 PM - Exit CreateDevices
4/25/2011 8:43:25 PM - Waiting to initialize External Devices...
4/25/2011 8:43:25 PM - I/O(Insteon Protocol) Interface Initialized.
4/25/2011 8:43:25 PM - Exit InitPlugin
-----------*Pre-Error Log*----------------
4/25/2011 8:43:25 PM - Exit InitIO
4/25/2011 8:43:25 PM - Enter InitX10
4/25/2011 8:43:25 PM - Enter InitPlugin
4/25/2011 8:43:25 PM - Global initialization already completed.
4/25/2011 8:43:25 PM - X10 Protocol Interface Initializing...
4/25/2011 8:43:25 PM - Exit InitPlugin
4/25/2011 8:43:25 PM - Exit InitX10
4/25/2011 8:43:27 PM - Note: External device support script does not exist in the HomeSeer scripts directory.
4/25/2011 8:43:27 PM - External Device Registration complete.
4/25/2011 8:43:27 PM - Generic Event Raised: Ready for Registration
4/25/2011 8:46:03 PM - Launching new BackgroundUpdate Thread with job type 13...
4/25/2011 8:46:03 PM - In BackgroundUpdate Thread...
4/25/2011 8:46:03 PM - Refreshing Interface database with records for 1 Insteon devices
4/25/2011 8:46:03 PM - ResourceManager::RequestExclusive for Resource 1
4/25/2011 8:46:03 PM - ResourceManager::RequestExclusive acquired for Resource 1
4/25/2011 8:46:03 PM - Calling PLM_AddID for 14.E7.DC 1 True
4/25/2011 8:46:03 PM - Sending command 02 6F 41 A2 01 14 E7 DC 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
4/25/2011 8:46:03 PM - ..Got RF PLM Response 02 6F 41 A2 01 14 E7 DC 00 00 00 15
4/25/2011 8:46:03 PM - ResourceManager::ReleaseExclusive for Resource 1
4/25/2011 8:46:03 PM - ResourceManager::RequestExclusive for Resource 1
4/25/2011 8:46:03 PM - ResourceManager::RequestExclusive acquired for Resource 1
4/25/2011 8:46:03 PM - Calling PLM_AddID for 14.E7.DC 254 False
4/25/2011 8:46:03 PM - Sending command 02 6F 40 F2 FE 14 E7 DC 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
4/25/2011 8:46:03 PM - ..Got RF PLM Response 02 6F 40 F2 FE 14 E7 DC 00 00 00 15
4/25/2011 8:46:03 PM - ResourceManager::ReleaseExclusive for Resource 1
4/25/2011 8:46:03 PM - 2 Links programmed...
4/25/2011 8:46:03 PM - A total of 2 records were programmed into the RF PLM Interface.
4/25/2011 8:46:03 PM - BackgroundUpdate Thread Complete...
4/25/2011 8:49:37 PM - Processing SetIOEx for device - \1 Cmd: 2 Bright: 0 Data1: 0 Data2: 0
4/25/2011 8:49:37 PM - Setting status and value for device \1. Old status:2 Old Value:100, New Status:2 New Value:100
4/25/2011 8:49:37 PM - ResourceManager::RequestExclusive for Resource 1
4/25/2011 8:49:37 PM - ResourceManager::RequestExclusive acquired for Resource 1
4/25/2011 8:49:37 PM - Sending command 02 62 14 E7 DC 0A 11 FF to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
4/25/2011 8:49:37 PM - ..Got RF PLM Response 02 62 14 E7 DC 0A 11 FF 06
4/25/2011 8:49:37 PM - ResourceManager::ReleaseExclusive for Resource 1
4/25/2011 8:49:37 PM - ***:Error in TransmitDeviceMsg: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'. -- Details System.MissingMethodException: Method not found: 'Boolean System.Threading.WaitHandle.WaitOne(Int32)'.
at InsteonModule.WaitForInsteonRaw(String[] Cmd, Int32& MatchOn)
at InsteonModule.SendandWaitForCmd(Int16 DevIndex, String Cmd, String[] RspCmd, String& Result, Int32& MatchOn)
at InsteonModule.TransmitDeviceMsg(TransmitMsgType Msg)
--------*End Pre-Error Log*--------------
--------*Start D:\Program Files\HomeSeer HS2\Config\Insteon.ini*--------------
[Config]
GroupBaseCode=[
NumDevices=1
LastInterfaceAddress=13.21.36
DeviceBaseCode=\
[Device 1]
DeviceID=14.E7.DC
DeviceName=Lights
DeviceLocation=Kitchen
DeviceType=021C
FirmwareVer=3A
DatabaseDelta=-1
LinksDownloaded=0
PollingInterval=0
EEValues=
SyncLinkedDevices=0
TotalInteractions=30
FailedInteractions=0
--------*End D:\Program Files\HomeSeer HS2\Config\Insteon.ini*--------------

Is it still using V 2.0?

Thanks,
Russ

[mnsandler]

i'll send HST an email and see if i can get some help with this. stay tuned

[mnsandler]

can you try loading .net 3.5 sp1 and report back.

[russj58]

OK, I will try that next.

[mnsandler]

OK, I will try that next.

if you haven't loaded 3.5 yet, please give this build a try. I picked a different waitone call that should exist in .net 2.0

please note: I have changed how motion sensors are programmed, etc. If you have any, please check this out within the plugin

[billorav]

Crashing HomeTroller Pro 3 with plugin

Mr. Sandler,

I'm brand new to HomeSeer. Migrating over from JDS Stargate (4,000+ of event lines). I have been trying to configure my PLM 2413U with your previous version 1.5.5.3 plugin and it crashes HS Pro v 2.5.0.21 on Windows XP Embeded EVERY TIME on startup. The built in Insteon PI from HS works fine but has limitations as you know. I just installed your PI 1.5.5.4 and it works fine with HomeTroller Pro 3 without crashing.

I was just getting ready to call Support and talk about the problem, but you must have fixed a bug in your non official release. I'm in the trial period but plan to go ahead with the license as long as you think things are worked out. If not I could still use the built in Insteon PLM plugin from HS, but it does not have the added features that your Plugin has.

Thanks for your quick updates. And I'm sure I will have more questions as time goes by, as I start converting the old JDS code over to HS and update more and more X10 to Insteon.

Bill

HomeTroller PRO 3 v 2.5.0.21: HSPI_Insteon_1.5.5.4, HSPI_RCS, HSPI_JDS Stargate - more to add through time.

[mnsandler]

Mr. Sandler,

I'm brand new to HomeSeer. Migrating over from JDS Stargate (4,000+ of event lines). I have been trying to configure my PLM 2413U with your previous version 1.5.5.3 plugin and it crashes HS Pro v 2.5.0.21 on Windows XP Embeded EVERY TIME on startup. The built in Insteon PI from HS works fine but has limitations as you know. I just installed your PI 1.5.5.4 and it works fine with HomeTroller Pro 3 without crashing.

I was just getting ready to call Support and talk about the problem, but you must have fixed a bug in your non official release. I'm in the trial period but plan to go ahead with the license as long as you think things are worked out. If not I could still use the built in Insteon PLM plugin from HS, but it does not have the added features that your Plugin has.

Thanks for your quick updates. And I'm sure I will have more questions as time goes by, as I start converting the old JDS code over to HS and update more and more X10 to Insteon.

Bill

HomeTroller PRO 3 v 2.5.0.21: HSPI_Insteon_1.5.5.4, HSPI_RCS, HSPI_JDS Stargate - more to add through time.

Bill,
Welcome to Homeseer and the Insteon Forums.

the prev plugin versions (1.5 - 1.5.5) required .net 3.5 sp1. So this is still an option for you. But I revised 1.5.5.4 to make it compatible with .net 2.0 which is think is more common. I don't foresee any issues going forward. Please post any issues related to 1.5.5.4 on this thread.

Good luck with the transition.

Oh, and please call me Mark