802.11 thermostat support Missing posts
Any one know what happened to the thread I can not seem to find it?
802.11 thermostat support </pre>
802.11 thermostat support </pre>
-
HS4 Environment
Proxmox win11 / HS4
Netiom-Xap board
Plug-In's
rnbWeather 4.4.2.0
mcsMQTT V6.15.1.0
mcsXap V3.0.0.72
Zigbee Plus V1.0.0.0
Zigbee V4.0.11.0
There is no place Like 127.0.0.1 -
No idea. I was involved in it too, and it seems to have disappeared. -
Guys I must have accidentally delete the entire thread. Hopefully the final script can get reposted otherwise the original is still here:
http://board.homeseer.com/showthread.php?t=150850Comment
-
Rupp should I start a new thread? I did update the original script so it now controls the 3M50 wifi thermostat. I wanted to share it with everyone. also were would be the best place for me to post it?HS4 Environment
Proxmox win11 / HS4
Netiom-Xap board
Plug-In's
rnbWeather 4.4.2.0
mcsMQTT V6.15.1.0
mcsXap V3.0.0.72
Zigbee Plus V1.0.0.0
Zigbee V4.0.11.0
There is no place Like 127.0.0.1Comment
-
I would recommend posting the finished script in the scripts library and link to this post (as long as I don't delete it again
)
Comment
-
I'd suggest starting a new thread. I'm in the process of writing a plugin for the 3M50, as well as the other WiFi enabled RadioThermostat models. I'm hoping to have something ready to test in the next week to two weeks. I'm going to start a new thread for discussion of the plugin, since I don't want to hijack the discussion you previously had going about scripting the thermostat.HS Pro 3.0 | Linux Ubuntu 16.04 x64 virtualized under Proxmox (KVM)
Hardware: Z-NET - W800 Serial - Digi PortServer TS/8 and TS/16 serial to Ethernet - Insteon PLM - RFXCOM - X10 Wireless
Plugins: HSTouch iOS and Android, RFXCOM, BlueIris, BLLock, BLDSC, BLRF, Insteon PLM (MNSandler), Device History, Ecobee, BLRing, Kodi, UltraWeatherWU3
Second home: Zee S2 with Z-Wave, CT101 Z-Wave Thermostat, Aeotec Z-Wave microswitches, HSM200 occupancy sensor, Ecolink Z-Wave door sensors, STI Driveway Monitor interfaced to Zee S2 GPIO pins.Comment
-
Ok, hopefully the script will get reposted for those wanting that.Originally posted by reidfo View PostComment
-
I did what you suggested Rupp. its in the scripts directory. and pointed it here for the discussion.
Script thread is located here: http://forums.homeseer.com/showthread.php?t=151612HS4 Environment
Proxmox win11 / HS4
Netiom-Xap board
Plug-In's
rnbWeather 4.4.2.0
mcsMQTT V6.15.1.0
mcsXap V3.0.0.72
Zigbee Plus V1.0.0.0
Zigbee V4.0.11.0
There is no place Like 127.0.0.1Comment
-
-
Using the RM-50 script
Sorry for posting this here - the original post is not accepting additional posts.
Is it absolutely necessary to create the new variable type and to run the .thm script? I've modified the script to run when I call it, and by setting the IP address to correspond to the RM-50 thermostat, I am able to poll the thermostat and set its setpoint while simply referring to a virtual device of any type.
Just want to make sure I'm not screwing up the system in some unknown fashion...Comment
-
Plugin
When you get ready I would be willing to test your plugin. I just bought a 3M-50 and am installing it now.Originally posted by reidfo View PostComment
-
Poll rate?
I installed and configured the 2M50 poll script but it appears that it is not polling. I can set the setpoint, turn on the fan, etc and when I do the temp updates but it does not automatically poll per the poll interval am I doing something wrong?Comment
-
hs3
Any change this script will get update to hs3 ?
Im new to Homeseer, I have hs3 installed and controlling lots of things. I bought the 3m50 last year, and don't want to have to get another type.
I tried to run the script by changing the directory names, but still get errors.
thanks
~KenComment
Comment