Announcement

Collapse
No announcement yet.

Homeseer WS100 Switch Orientation

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Homeseer WS100 Switch Orientation

    First switch install, and I didn't test out switch orientation. I installed the wires and in the same orientation as the old switch Hot and Neutral on top. Well now you have to hit ge bottom pad to turn on. Why are they backwards, and is it possible to basically configure the orientation in the software? The little led is on top by the way. If I take it all out and spin the orientation, the hot and neutral will be on the bottom, and traveler in the top.
    Tags: None
    #2
    You've got it installed upside down...

    undue the faceplate screws and flip 180 degrees... You don't need to change any wiring.
    HS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.

    Comment

      #3
      I know it's upside down, but the diagram in the documentation clearly shows the Common and Hot on top, and every switch I've ever seen had the Hot and Common on top. Did the factory make it wrong?

      Comment

        #4
        I believe there's a setting in the parameters so you can reverse this (although the LED would still be on top of course).

        Comment

          #5
          Yes, you are correct. 'Top paddle turns on load' or 'Bottom paddle turns on load' in the settings...

          Robert
          HS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.

          Comment

            #6
            Originally posted by tome10 View Post
            I know it's upside down, but the diagram in the documentation clearly shows the Common and Hot on top, and every switch I've ever seen had the Hot and Common on top. Did the factory make it wrong?
            The location of the hot and neutral terminals should not be used as an indication of the switches proper mounting orientation. Different manufacturers do it different ways. You should follow the directions or markings on the device to indicate proper orientation.

            Sent from my Pixel XL using Tapatalk

            Comment

            Previous template Next
            Working...
            X