Announcement

Collapse
No announcement yet.

Z-Net can't find HomeID and node

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Z-Net can't find HomeID and node

    Hooked a friend up with Homeseer last week. Had a spare Z-net that I passed along to him. Having all sorts of trouble getting past where the Z-wave plug-in asks for HomeID and node. Can ping it, find.homeseer finds it. Have connected in all sorts of ways and it responds correctly to a ping. It is an older one with 1.0.10 firmware.

    Anyone help point us in a direction?

    Chris and HS new guy Jason
    Attached Files

    #2
    Try this: disable the zwave plugin, then reboot the znet. Wait 5-10 seconds, then enable the plugin. If it works better, you might try updating the firmware to the latest revision. If it has 1.0.10 this must be a znet v1, and the latest revision 1.0.22 has some improvements to prevent a communication deadlock that could explain what you are seeing.

    If that doesn't help, you may have a hardware failure in the zwave controller.

    Comment


      #3
      Thank you for your response. I tried the above with no luck. Based on other threads and your advice it looks like a hardware failure :-(

      Comment


        #4
        Originally posted by jbarr1108 View Post
        Thank you for your response. I tried the above with no luck. Based on other threads and your advice it looks like a hardware failure :-(
        I ordered a new z-net from the store.... We will re-group after it arrives.

        The one you have has been on the shelf for about 18 months. Perhaps we can re-image the SD after we get the new one to work.

        Chris

        Comment

        Working...
        X