HomeSeer Message Board

HomeSeer Message Board (http://board.homeseer.com/index.php)
-   UltraPioneerAVR HSPI (http://board.homeseer.com/forumdisplay.php?f=1083)
-   -   UltraPioneerAVR HSPI - Support for 22 New 2012 and 2013 Pioneer Receivers (http://board.homeseer.com/showthread.php?t=159479)

Ultrajones April 18th, 2013 03:51 PM

UltraPioneerAVR HSPI - Support for 22 New 2012 and 2013 Pioneer Receivers
 
I just added support for the following 22 new Pioneer Receivers:

Pioneer Elite Receiver SC-1222
Pioneer Elite Receiver SC-1227
Pioneer Elite Receiver SC-1522
Pioneer Elite Receiver SC-1527
Pioneer Elite Receiver SC-1527
Pioneer Elite Receiver SC-61
Pioneer Elite Receiver SC-63
Pioneer Elite Receiver SC-65
Pioneer Elite Receiver SC-67
Pioneer Elite Receiver SC-68
Pioneer Receiver SC-LX56
Pioneer Receiver SC-LX76
Pioneer Receiver SC-LX86
Pioneer Receiver VSA-922
Pioneer Receiver VSX-1027
Pioneer Receiver VSX-1122
Pioneer Receiver VSX-1127
Pioneer Receiver VSX-60
Pioneer Receiver VSX-922
Pioneer Elite VSX-43
Pioneer Elite VSX-70
Pioneer Receiver VSX-1123

Regards,
Ultrajones

bdrake60 October 14th, 2013 11:07 AM

VSX-822
 
Does it support VSX-822

Ultrajones October 14th, 2013 10:11 PM

No, sorry. The VSX-822 receiver is not listed in the Pioneer RS232 protocol documentation.

Willm November 2nd, 2013 05:22 AM

SC-LX86 and VSC-LX55
 
Thanks for the update, it has cleared up issues with my SC-LX86. However, my homeseer is now unable to connect to my VSX-LX55 (2011 model), this seemed to be working well with the previous version. Can you please check into this?

Willm

Willm November 8th, 2013 08:55 AM

Solved
 
After fiddling for a while, I realised the receiver network connection had stopped, turning on and off made no difference, so I unplugged the receiver for a few minutes and reconnected it. That brought it back onto the network, I then needed to re-start homeseer and now it's back on-line.

Willm

Stef November 30th, 2013 09:27 PM

Hi Ultra,

I've just bought a Pioneer VSX-1023-K. I'd like to know:

1) Does your plugin support this receiver?

2) If I'm buying your plugin for HS2, will I need to buy it again for HS3?

I will switch to HS3 really soon.

Ultrajones December 1st, 2013 12:11 PM

Quote:

Originally Posted by Stef (Post 1090763)
Hi Ultra,

I've just bought a Pioneer VSX-1023-K. I'd like to know:

1) Does your plugin support this receiver?

2) If I'm buying your plugin for HS2, will I need to buy it again for HS3?

I will switch to HS3 really soon.

Hello Stef. The Pioneer VSX-1023-K is not officially supported, however, it may work using the TCP port for the iPhone.

If your switching to HS3, then don't buy the HS2 plug-in. I should have the HS3 plug-in done by the end of December. You should be able to confirm the plug-in works with your receiver by using the HS2 plug-in for testing. You'll have 30 days to try it out to confirm it works as expected.

Regards,
Ultrajones

Stef December 1st, 2013 01:02 PM

Hi Ultra,

Couldn't wait for your anwser. I decided to buy the hs2 version this morning. I'll just buy it again for HS3 when it will be available.

Now that you have my money :p, Could you support my receiver model?

I added it manually. I can turn it on/off. Toggle mute and select some input but not the most use one "SAT/CBL"...

I can't do anything with the Zone 2. That's very important for me to be able to turn on/off the zone 2 and select it's input source.

Thank you,

Stéphane.

Stef December 2nd, 2013 10:58 PM

I'll try to exchange my VSX-1023-K for something better. Probably the VSX-1123.

With the VSX-1023-K, you can control the main zone from IP but not the zone 2!!! So stupid. There isn't any button on the remote to control zone 2. In the manual there is only a little information about the 2nd zone.:mad:

Should I go for the Pioneer VSX-1123 and enjoy your plugin or go for something else like a Denon AVR-2313CI and use the other plug-in... The Denon TV interface look better.

Ultrajones December 3rd, 2013 07:53 PM

I *really* like my Pioneer VSX-1123 and I know the plug-in has a lot of feature. I cannot comment on the Denon AVR-2313CI or the "other plug-in" because I have never used them.

Regards,
Ultrajones

seerd January 5th, 2014 12:17 PM

Quote:

Originally Posted by Ultrajones (Post 1090886)
If your switching to HS3, then don't buy the HS2 plug-in. I should have the HS3 plug-in done by the end of December.

Hi, I'm running HS3 only at this time. Just picked up a SC-1328-K which I understand is the same as the SC-72 Elite.

1) Is a HS3 version of this plugin likely to be available for purchase soon?

2) My receiver has both RS232 and Ethernet connectivity. Is it likely to be supported? If not can I add support for it or is it likely the same functions as other units?

thanks again

Nate

Priknr1 January 7th, 2014 01:27 PM

Any plans to make it compatible for the xw series?
Network audio players, espacially the xw-sma3-k

Would be great!

Ultrajones January 11th, 2014 10:55 AM

I just picked up the A3 at Best Buy for $69. I'll see what it can do...

sparkysar April 6th, 2014 12:33 AM

VSX-823
 
Does it fully support the VSX 823 - I was able to get connection but only a few controllable items were available

:)

Ultrajones April 6th, 2014 10:35 AM

No, the Pioneer VSX-823 is not supported because it does not fully implement the Pioneer RS232 control protocol. Only a small subset of features are available on the VSX-823.

Regards,
Ultrajones

sparkysar April 6th, 2014 10:42 PM

Quote:

Originally Posted by Ultrajones (Post 1114895)
No, the Pioneer VSX-823 is not supported because it does not fully implement the Pioneer RS232 control protocol. Only a small subset of features are available on the VSX-823.

Regards,
Ultrajones

Tats too bad , its quite amazing what control is offered via the Android app across the LAN port. Is Pioneer RS232 still a widely used protocol with Pioneer in times when Ethernet control apps are becoming more common?

sparkysar April 6th, 2014 10:58 PM

Quote:

Originally Posted by Ultrajones (Post 1114895)
No, the Pioneer VSX-823 is not supported because it does not fully implement the Pioneer RS232 control protocol. Only a small subset of features are available on the VSX-823.

Regards,
Ultrajones

I may have a chance to return the VSX 823 and pick up a VSX 1028 that includes AV Navigator A PC control program does the plugin support the VSX 1028 ?

Ultrajones April 7th, 2014 08:47 AM

Yes, it looks like the VSX-1028 is supported. The plug-in works with the following receivers supported by the Pioneer iControlAV2013:

* Set the network standby --> "ON" beforehand, you can turn ON your AV receiver with iControlAV2013.

USA/Canada : SC-79, SC-77, SC-75, SC-1523, SC-1528, SC-72, SC-1323,
SC-1328, SC-71, SC-1223, SC-1228, VSX-70, VSX-1123, VSX-1128, VSX-1028
South-America : SC-LX87, SC-LX77, SC-LX57, VSX-1123, VSX-923
Europe : SC-LX87, SC-LX77, SC-LX57, SC-2023, SC-1223, VSX-1123, VSX-923
Asean : SC-LX87, SC-LX77, SC-LX57, SC-2023, SC-1223, VSX-1123, VSX-923
Osceania : SC-LX87, SC-LX77, SC-LX57, SC-2023, SC-1223, VSX-1123, VSX-923
Middle-East : SC-LX87, SC-LX77, SC-LX57, SC-2023, SC-1223, VSX-1123,
VSX-923
East-Asia : SC-LX87, SC-LX77, SC-LX57, SC-1223, VSX-1123, VSX-923

Regards,
Ultrajones

Ultrajones April 7th, 2014 08:54 AM

Any here is the 2012 lineup:

USA/Canada : SC-68, SC-67, SC-65, SC-1522-K, SC-1527-K, SC-63, SC-61,
SC-1222-K, SC-1227-K,VSX-60, VSX-1122-K, VSX-1127-K, VSX-1027-K
South-America : SC-68, SC-67, SC-65, SC-63, SC-61, VSX-60, VSX-1122-K,
SC-LX56, VSX-922-K
Europe : SC-LX86, SC-LX76, SC-LX56, SC-2022-K, VSX-1122-K, VSX-922-K
Asean : SC-LX86, SC-LX76, SC-LX56, SC-2022-K, VSX-1122-K, VSX-922-K
Oceania : SC-LX86, SC-LX76, SC-LX56, SC-2022-K, VSX-1122-K, VSX-922-K
Middle-East : SC-LX86, SC-LX76, SC-LX56, SC-2022-K, VSX-1122-K, VSX-922-K
East-Asia : SC-LX86, SC-LX76, SC-LX56, VSX-1122-K, VSX-922-K

Ultrajones April 7th, 2014 09:01 AM

Quote:

Originally Posted by sparkysar (Post 1114975)
Tats too bad , its quite amazing what control is offered via the Android app across the LAN port. Is Pioneer RS232 still a widely used protocol with Pioneer in times when Ethernet control apps are becoming more common?

Sorry, for clarification the RS232 protocol is what is used via the Ethernet connection. If the Android application can turn the receiver on/off, then so can the UltraPioneerAVR plug-in. I would just need to add the receiver to the supported list. Can you confirm?


All times are GMT -4. The time now is 01:42 AM.


Copyright HomeSeer Technologies, LLC