I'm running HS3 on Linux and Insteon Plugin version 3.0.6.23. 3.0.6.23 is the beta version but this was occurring on the non-beta also.
I have several KPLs in the installation, the KPL buttons are used to control nearby lights at various dim levels and ramp rates.
For Example:
Button C on the Kitchen KPL turns off the kitchen and island lights while it turns on the sink light at 5%.
Button D on the Kitchen KPL turns on the kitchen, island, and sink lights at 50%.
I have 'Sync linked responder devices' enabled.
The problem:
When I physically press the KPL button it does what I expect, diming or turning off the various lights.
When I turn on the KPL button from HomeSeer web or HSTouch, all of the lights the keypad controls, even if not controlled by that button, turn on to 100% in .1 seconds. This holds true even if the default ramp rates and brightness for the loads are different (80% .5 seconds)
It doesn't seem to matter if controlled by individual links or by the group.
Besides using events, is there anyway to get the HomeSeer Web/HSTouch KPL buttons to work properly? I don't really want to program the KPLs twice (once in HS once in the plugin).
Controlling the groups instead of the KPL give me trouble too, because if I change one of the lights brightness manually I have the KPL button turn off but the group doesn't update it's status. Using an even to update the group status then turns off the lights.
HomeSeer Version: HS3 Standard Edition 3.0.0.357
Linux version: Linux HomeSeer 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) x86_64 GNU/Linux System Uptime: 0 Days 19 Hours 48 Minutes 31 Seconds
IP Address: 10.10.100.249
Number of Devices: 86
Number of Events: 27
Available Threads: 399
Enabled Plug-Ins
2.0.38.0: BLLAN
2.0.22.0: BLOccupied
2.0.26.0: BLRing
3.0.0.6: HSZigBee
3.0.6.23: Insteon
3.0.0.76: weatherXML
I have several KPLs in the installation, the KPL buttons are used to control nearby lights at various dim levels and ramp rates.
For Example:
Button C on the Kitchen KPL turns off the kitchen and island lights while it turns on the sink light at 5%.
Button D on the Kitchen KPL turns on the kitchen, island, and sink lights at 50%.
I have 'Sync linked responder devices' enabled.
The problem:
When I physically press the KPL button it does what I expect, diming or turning off the various lights.
When I turn on the KPL button from HomeSeer web or HSTouch, all of the lights the keypad controls, even if not controlled by that button, turn on to 100% in .1 seconds. This holds true even if the default ramp rates and brightness for the loads are different (80% .5 seconds)
It doesn't seem to matter if controlled by individual links or by the group.
Besides using events, is there anyway to get the HomeSeer Web/HSTouch KPL buttons to work properly? I don't really want to program the KPLs twice (once in HS once in the plugin).
Controlling the groups instead of the KPL give me trouble too, because if I change one of the lights brightness manually I have the KPL button turn off but the group doesn't update it's status. Using an even to update the group status then turns off the lights.
HomeSeer Version: HS3 Standard Edition 3.0.0.357
Linux version: Linux HomeSeer 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) x86_64 GNU/Linux System Uptime: 0 Days 19 Hours 48 Minutes 31 Seconds
IP Address: 10.10.100.249
Number of Devices: 86
Number of Events: 27
Available Threads: 399
Enabled Plug-Ins
2.0.38.0: BLLAN
2.0.22.0: BLOccupied
2.0.26.0: BLRing
3.0.0.6: HSZigBee
3.0.6.23: Insteon
3.0.0.76: weatherXML
Comment