Hi, I noticed recently that HS was no longer responding to commands from devices. Today, I did a "Test Comms" with all devices on the network, and every device failed after 4 tries.
It looks like the plugin is connected to the PLM just fine, and sending commands works fine. It seems like the PLM is not receiving a response from any of the devices. Is there more testing I can do to determine if this is an issue with the plugin or with the PLM itself?
Here's a log example from the tests:
If I try to turn a device on or off this is what the plugin outputs:
Here's my system specs:
HomeSeer Version: HS3 Pro Edition 3.0.0.368 (Windows)
Insteon Plugin Version: 3.0.5.37
PLM: 2413U V2.1 1517 (Firmware Version 9E)
You have 33 internal Insteon device(s) registered in the system, 0 external device(s), and 9 group(s).
These devices and groups currently consume 128 link database entries in your interface.*
You have 227 unused outbound link addresses out of 254 total available.
It looks like the plugin is connected to the PLM just fine, and sending commands works fine. It seems like the PLM is not receiving a response from any of the devices. Is there more testing I can do to determine if this is an issue with the plugin or with the PLM itself?
Here's a log example from the tests:
Code:
Dec-15 4:29:06 PM Insteon Pinging Insteon device 1A.4B.65 Dec-15 4:29:06 PM Insteon Did not get a ping response from Insteon device Outside Flood Lights (1A.4B.65) Dec-15 4:29:01 PM Insteon Pinging Insteon device 1A.4B.65 Dec-15 4:29:01 PM Insteon Did not get a ping response from Insteon device Outside Flood Lights (1A.4B.65) Dec-15 4:28:55 PM Insteon Pinging Insteon device 1A.4B.65 Dec-15 4:28:55 PM Insteon Did not get a ping response from Insteon device Master Bedroom Tabletop Keypad (19.31.C7) Dec-15 4:28:50 PM Insteon Pinging Insteon device 19.31.C7 Dec-15 4:28:50 PM Insteon Did not get a ping response from Insteon device Master Bedroom Tabletop Keypad (19.31.C7)
Code:
Dec-15 5:10:23 PM Insteon Setting value for 1B.27.A3:1 Dec-15 5:10:23 PM Insteon Did not receive a response from Kitchen Overheads (1B.27.A3). Try #5 failed. Dec-15 5:10:17 PM Insteon ..Got RF PLM Response 02 62 1B 27 A3 0F 13 00 06 Dec-15 5:10:17 PM Insteon Did not receive a response from Kitchen Overheads (1B.27.A3). Try #4 failed. Dec-15 5:10:17 PM Insteon Sending command 02 62 1B 27 A3 0F 13 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False Dec-15 5:10:12 PM Insteon ..Got RF PLM Response 02 62 1B 27 A3 0F 13 00 06 Dec-15 5:10:12 PM Insteon Did not receive a response from Kitchen Overheads (1B.27.A3). Try #3 failed. Dec-15 5:10:12 PM Insteon Sending command 02 62 1B 27 A3 0F 13 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False Dec-15 5:10:06 PM Insteon ..Got RF PLM Response 02 62 1B 27 A3 0F 13 00 06 Dec-15 5:10:06 PM Insteon Did not receive a response from Kitchen Overheads (1B.27.A3). Try #2 failed. Dec-15 5:10:06 PM Insteon Sending command 02 62 1B 27 A3 0F 13 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False Dec-15 5:10:01 PM Insteon ..Got RF PLM Response 02 62 1B 27 A3 0F 13 00 06 Dec-15 5:10:01 PM Insteon Did not receive a response from Kitchen Overheads (1B.27.A3). Try #1 failed. Dec-15 5:10:01 PM Insteon Sending command 02 62 1B 27 A3 0F 13 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False Dec-15 5:09:55 PM Insteon ..Got RF PLM Response 02 62 1B 27 A3 0F 13 00 06 Dec-15 5:09:55 PM Insteon Sending command 02 62 1B 27 A3 0F 13 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False Dec-15 5:09:55 PM Insteon Setting status and value for device 1B.27.A3:1. Old status:100 Old Value:100, New Status:3 New Value:0 Dec-15 5:09:55 PM Insteon CAPIControl: Label=Off, Value=0, ControlType=Button
HomeSeer Version: HS3 Pro Edition 3.0.0.368 (Windows)
Insteon Plugin Version: 3.0.5.37
PLM: 2413U V2.1 1517 (Firmware Version 9E)
You have 33 internal Insteon device(s) registered in the system, 0 external device(s), and 9 group(s).
These devices and groups currently consume 128 link database entries in your interface.*
You have 227 unused outbound link addresses out of 254 total available.
Comment