Has anyone been able to successfully join a FortrezZ MIMO2+ device to HS3? I bought a couple and they arrived in the mail today. When I joined them to the network they both did the following:
Neither of the two inputs showed up or work. There's a 'General Purpose' device that doesn't seem to do anything. The screenshot attached shows what showed up. The log file below shows the joining process. You'll notice there's a point in there where it says 4 out of 5 child devices were created successfully. The last things in the log are when I shorted the inputs to trigger them. They both failed.
Are these devices not fully supported by HS3? Anything I can do to make them work?
Eric
Jan-02 3:53:11 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:53:08 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:29 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:22 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:19 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:16 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:08 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:51:39 PM Z-Wave Device: Upstairs Back Door Home Security Set to NOTIFICATION for type Home Security, Event: No Event
Jan-02 3:50:54 PM Z-Wave 4 out of 5 Child devices of node 11 were created successfully.
Jan-02 3:50:52 PM Z-Wave Getting association information for Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:52 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:51 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 3, Endpoint 3) to HomeSeer
Jan-02 3:50:50 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:49 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 2, Endpoint 2) to HomeSeer
Jan-02 3:50:48 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:48 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 1, Endpoint 1) to HomeSeer
Jan-02 3:50:48 PM Z-Wave Root Node Device Node 11 Z-Wave FortrezZ Multilevel Sensor was created for node 11 on network CA949194
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 4
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 3
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SENSOR_MULTILEVEL_V2, Endpoint 2
Jan-02 3:50:46 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SENSOR_MULTILEVEL_V2, Endpoint 1
Jan-02 3:49:44 PM Z-Wave Z-Wave Plus Association Root Group Information For Group 3 retrieved successfully from Node 11 Group Name=SIG2 Trigger, Profile Is General:Not Specific And the group hosts 1 Event commands.
Jan-02 3:49:43 PM Z-Wave Getting Z-Wave Plus Association Group Information (3 groups) from Node 11...
Jan-02 3:49:42 PM Z-Wave All associations for node 11 have been retrieved successfully, it supports associations on these groups: 1, 2, 3.
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 3 can have 2 associations, and currently has 0
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 2 can have 2 associations, and currently has 0
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 1 can have 2 associations, and currently has 0
Jan-02 3:49:41 PM Z-Wave Getting association information for node 11
Jan-02 3:49:41 PM Z-Wave Node 11 is a Z-Wave Plus node. Retrieving ZWPlus Info...
Jan-02 3:49:41 PM Z-Wave Node 11 is Z-Wave version: Lib: 4.34 App: 2.7
Jan-02 3:49:41 PM Z-Wave Node: 11 Supports Secure Class(es): ASSOCIATION, MULTI_INSTANCE_ASSOCIATION, POWERLEVEL, BASIC, NOTIFICATION_V3, SWITCH_BINARY, SENSOR_MULTILEVEL_V2, CONFIGURATION, MULTI_CHANNEL_V3, FIRMWARE_UPDATE_MD_V3
Jan-02 3:49:41 PM Z-Wave Node: 11 Supports Class(es): ZWAVEPLUS_INFO_V2, VERSION_V2, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, ASSOCIATION_GRP_INFO, NOTIFICATION_V3, ASSOCIATION, MULTI_INSTANCE_ASSOCIATION, POWERLEVEL, SWITCH_BINARY, SENSOR_MULTILEVEL_V2, CONFIGURATION, MULTI_CHANNEL_V3, SECURITY, FIRMWARE_UPDATE_MD_V3
Jan-02 3:49:41 PM Z-Wave Received information on 10 secure command classes from node 11
Jan-02 3:49:40 PM Z-Wave Getting SECURITY class information for node 11
Jan-02 3:49:40 PM Z-Wave Z-Wave Security Scheme and Key Exchange was successful for node 11, now waiting for the device to finish storing information before proceeding...
Jan-02 3:49:40 PM Z-Wave Security device (Node 11) is verified as operating securely in this network.
Jan-02 3:49:40 PM Z-Wave Negotiating or Verifying SECURITY SCHEME for node 11
Jan-02 3:49:40 PM Z-Wave Z-Wave manufacturer information for node 11, ID: 132=84H (FortrezZ), Type: 1123=463H, ID: 519=207H
Jan-02 3:49:40 PM Z-Wave Synchronize nodes finished. Number of device nodes to be created/added = 1
Jan-02 3:49:39 PM Z-Wave Done. Node 11 Added.
Neither of the two inputs showed up or work. There's a 'General Purpose' device that doesn't seem to do anything. The screenshot attached shows what showed up. The log file below shows the joining process. You'll notice there's a point in there where it says 4 out of 5 child devices were created successfully. The last things in the log are when I shorted the inputs to trigger them. They both failed.
Are these devices not fully supported by HS3? Anything I can do to make them work?
Eric
Jan-02 3:53:11 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:53:08 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:29 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:22 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:19 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:16 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:52:08 PM Z-Wave Error Set New Level for CC BASIC error - failed test for (No Parent) / Node 11 Z-Wave FortrezZ Multilevel Sensor, CCType=COMMAND_CLASS_BASIC
Jan-02 3:51:39 PM Z-Wave Device: Upstairs Back Door Home Security Set to NOTIFICATION for type Home Security, Event: No Event
Jan-02 3:50:54 PM Z-Wave 4 out of 5 Child devices of node 11 were created successfully.
Jan-02 3:50:52 PM Z-Wave Getting association information for Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:52 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:51 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 3, Endpoint 3) to HomeSeer
Jan-02 3:50:50 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:49 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 2, Endpoint 2) to HomeSeer
Jan-02 3:50:48 PM Z-Wave Assigning return route from node 1 to Node 11 Z-Wave FortrezZ Multilevel Sensor
Jan-02 3:50:48 PM Z-Wave Z-Wave: Adding association for Z-Wave device Node 11 Z-Wave FortrezZ Multilevel Sensor (Node 11, Group 1, Endpoint 1) to HomeSeer
Jan-02 3:50:48 PM Z-Wave Root Node Device Node 11 Z-Wave FortrezZ Multilevel Sensor was created for node 11 on network CA949194
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 4
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 3
Jan-02 3:50:47 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SENSOR_MULTILEVEL_V2, Endpoint 2
Jan-02 3:50:46 PM Z-Wave Processing Information for Node 11 Multi-CHANNEL Command Class of SENSOR_MULTILEVEL_V2, Endpoint 1
Jan-02 3:49:44 PM Z-Wave Z-Wave Plus Association Root Group Information For Group 3 retrieved successfully from Node 11 Group Name=SIG2 Trigger, Profile Is General:Not Specific And the group hosts 1 Event commands.
Jan-02 3:49:43 PM Z-Wave Getting Z-Wave Plus Association Group Information (3 groups) from Node 11...
Jan-02 3:49:42 PM Z-Wave All associations for node 11 have been retrieved successfully, it supports associations on these groups: 1, 2, 3.
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 3 can have 2 associations, and currently has 0
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 2 can have 2 associations, and currently has 0
Jan-02 3:49:42 PM Z-Wave Node 11 Association Group 1 can have 2 associations, and currently has 0
Jan-02 3:49:41 PM Z-Wave Getting association information for node 11
Jan-02 3:49:41 PM Z-Wave Node 11 is a Z-Wave Plus node. Retrieving ZWPlus Info...
Jan-02 3:49:41 PM Z-Wave Node 11 is Z-Wave version: Lib: 4.34 App: 2.7
Jan-02 3:49:41 PM Z-Wave Node: 11 Supports Secure Class(es): ASSOCIATION, MULTI_INSTANCE_ASSOCIATION, POWERLEVEL, BASIC, NOTIFICATION_V3, SWITCH_BINARY, SENSOR_MULTILEVEL_V2, CONFIGURATION, MULTI_CHANNEL_V3, FIRMWARE_UPDATE_MD_V3
Jan-02 3:49:41 PM Z-Wave Node: 11 Supports Class(es): ZWAVEPLUS_INFO_V2, VERSION_V2, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, ASSOCIATION_GRP_INFO, NOTIFICATION_V3, ASSOCIATION, MULTI_INSTANCE_ASSOCIATION, POWERLEVEL, SWITCH_BINARY, SENSOR_MULTILEVEL_V2, CONFIGURATION, MULTI_CHANNEL_V3, SECURITY, FIRMWARE_UPDATE_MD_V3
Jan-02 3:49:41 PM Z-Wave Received information on 10 secure command classes from node 11
Jan-02 3:49:40 PM Z-Wave Getting SECURITY class information for node 11
Jan-02 3:49:40 PM Z-Wave Z-Wave Security Scheme and Key Exchange was successful for node 11, now waiting for the device to finish storing information before proceeding...
Jan-02 3:49:40 PM Z-Wave Security device (Node 11) is verified as operating securely in this network.
Jan-02 3:49:40 PM Z-Wave Negotiating or Verifying SECURITY SCHEME for node 11
Jan-02 3:49:40 PM Z-Wave Z-Wave manufacturer information for node 11, ID: 132=84H (FortrezZ), Type: 1123=463H, ID: 519=207H
Jan-02 3:49:40 PM Z-Wave Synchronize nodes finished. Number of device nodes to be created/added = 1
Jan-02 3:49:39 PM Z-Wave Done. Node 11 Added.
Comment