No problems on my end.
Announcement
Collapse
No announcement yet.
HS3 Insteon Plug-In Version 3.0.6.49 Beta (Win & Linux)..In Beta section of Updater7
Collapse
This topic is closed.
X
X
-
Originally posted by mnsandler View PostPossibly. give it a go and let me know
For comparison, I NEVER had this occur prior to installing the Beta (and I've been using the Insteon plugin since the end of February).
The issue with the Beta where an incorrect Unknown value = 0 was being reported on loss of comm. (causing the system to think that the garage door had been opened) occurred 3-4 times per day until it was fixed (thanks, for that).
Sep-27 11:01:28 PM Event Event Trigger "Notifications Unsecure System Status"
Sep-27 11:01:28 PM Insteon Setting status and value for device 1F.C3.AA:1. Old status:100 Old Value:100, New Status:3 New Value:0
Sep-27 11:01:28 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:01:28 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:01:28 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:01:28 PM Insteon Received STX 0x50 (Raw Insteon Rec):1F C3 AA 2A 01 80 26 00 00
Sep-27 11:01:28 PM Insteon ..Got RF PLM Response 02 62 1F C3 AA 0A 19 01 06
Sep-27 11:01:28 PM Insteon Saved ini file. msecs=14
Sep-27 11:01:28 PM Insteon Sending command 02 62 1F C3 AA 0A 19 01 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
Sep-27 11:01:28 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-27 11:01:28 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Input Sensor: Garage Door Status (1F.C3.AA)
Sep-27 11:01:25 PM Insteon Setting status and value for device 1F.C3.AA:2. Old status:0 Old Value:0, New Status:3 New Value:0
Sep-27 11:01:25 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:01:25 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 27 00 00
Sep-27 11:01:25 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:01:25 PM Insteon Received STX 0x50 (Raw Insteon Rec):1F C3 AA 2A 01 80 27 00 00
Sep-27 11:01:24 PM Insteon ..Got RF PLM Response 02 62 1F C3 AA 0A 19 00 06
Sep-27 11:01:24 PM Insteon Sending command 02 62 1F C3 AA 0A 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
Sep-27 11:01:24 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Comment
-
Have you tried the latest beta. I changed the unknown value to -1Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View PostHave you tried the latest beta. I changed the unknown value to -1
This hadn't happened with 3.0.6.0 since February. I only started to experience these false sensor readings when I switched to the beta.
Comment
-
Originally posted by vball61 View PostI'm still having an issue with the Beta where my IOLinc sensor is incorrectly being reported as changing state. It's only happening once every 2-3 days, and I've attached a log of one incident, below.
For comparison, I NEVER had this occur prior to installing the Beta (and I've been using the Insteon plugin since the end of February).
The issue with the Beta where an incorrect Unknown value = 0 was being reported on loss of comm. (causing the system to think that the garage door had been opened) occurred 3-4 times per day until it was fixed (thanks, for that).Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View Postdo you have a detailed log snippet that shows the input sensor changing status back and forth after a second polling
I was hoping to catch a new event, but ran into an issue with polling of the device becoming disabled. I'll put that in a new post.
Sep-27 11:02:44 PM Insteon Setting status and value for device 1F.C3.AA:1. Old status:0 Old Value:0, New Status:2 New Value:100
Sep-27 11:02:44 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 11:02:44 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:02:44 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:02:42 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-27 11:02:42 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Input Sensor: Garage Door Status (1F.C3.AA)
Sep-27 11:02:39 PM Insteon Setting status and value for device 1F.C3.AA:2. Old status:0 Old Value:0, New Status:3 New Value:0
Sep-27 11:02:39 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:02:39 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:02:39 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:02:39 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-27 11:02:39 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Output Relay: Garage Door Control (1F.C3.AA)
Sep-27 11:02:39 PM Insteon Timed poll for Insteon device Access Garage Door (1F.C3.AA), Last contact 9/27/2017 11:01:28 PM. Polling interval of 1 min. reached, polling...
Sep-27 11:01:28 PM Insteon Setting status and value for device 1F.C3.AA:1. Old status:100 Old Value:100, New Status:3 New Value:0
Sep-27 11:01:28 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:01:28 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:01:28 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:01:28 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-27 11:01:28 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Input Sensor: Garage Door Status (1F.C3.AA)
Sep-27 11:01:25 PM Insteon Setting status and value for device 1F.C3.AA:2. Old status:0 Old Value:0, New Status:3 New Value:0
Sep-27 11:01:25 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-27 11:01:25 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 27 00 00
Sep-27 11:01:25 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-27 11:01:24 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-27 11:01:24 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Output Relay: Garage Door Control (1F.C3.AA)
Sep-27 11:01:24 PM Insteon Timed poll for Insteon device Access Garage Door (1F.C3.AA), Last contact 9/27/2017 11:00:14 PM. Polling interval of 1 min. reached, polling...
Comment
-
I encountered another issue, where after a second unsuccessful polling attempt of my garage door I/O Linc, the value for the sensor (1F.C3.AA:1) was changed from 'Unknown' (-1) to 'Open' (0), and polling became disabled for that I/O Linc (polling interval set to 0). Is that intended behavior? I didn't realize that polling had been disabled until I reviewed the log last night.
Thanks.
Sep-29 1:59:42 PM Insteon Warning! Polling failed twice for device: Access Garage Door (1F.C3.AA)
Sep-29 1:59:42 PM Insteon Setting status and value for device 1F.C3.AA:1. Old status:-1 Old Value:-1, New Status:3 New Value:0
Sep-29 1:59:42 PM Insteon Did not get any status response from 1F.C3.AA after 5 tries. No change to database delta value.
Sep-29 1:59:42 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #5 failed.
Sep-29 1:59:39 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #4 failed.
Sep-29 1:59:35 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #3 failed.
Sep-29 1:59:31 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #2 failed.
Sep-29 1:59:28 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #1 failed.
Sep-29 1:59:24 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-29 1:59:24 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Input Sensor: Garage Door Status (1F.C3.AA)
Sep-29 1:59:21 PM Insteon Setting status and value for device 1F.C3.AA:2. Old status:0 Old Value:0, New Status:3 New Value:0
Sep-29 1:59:21 PM Insteon Database delta value of 0 for device 1F.C3.AA is current. No changes since last database update.
Sep-29 1:59:21 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-29 1:59:21 PM Insteon Database recently heard delta value for device 1F.C3.AA is current.
Sep-29 1:59:21 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #1 failed.
Sep-29 1:59:18 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Sep-29 1:59:18 PM Insteon Requesting Insteon status (Polling) for device Access Garage Door Output Relay: Garage Door Control (1F.C3.AA)
Sep-29 1:59:18 PM Insteon Timed poll for Insteon device Access Garage Door (1F.C3.AA), Last contact 9/29/2017 1:58:12 PM. Polling interval of 1 min. reached, polling...
Sep-29 1:58:12 PM Insteon Setting status and value for device 1F.C3.AA:1. Old status:0 Old Value:0, New Status: Unknown New Value: -1
Sep-29 1:58:12 PM Insteon Did not get any status response from 1F.C3.AA after 5 tries. No change to database delta value.
Sep-29 1:58:12 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #5 failed.
Sep-29 1:58:09 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #4 failed.
Sep-29 1:58:05 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #3 failed.
Sep-29 1:58:02 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #2 failed.
Sep-29 1:57:58 PM Insteon Did not receive a response from Access Garage Door (1F.C3.AA). Try #1 failed.
Sep-29 1:57:55 PM Insteon Attempting to update the status for Access Garage Door (1F.C3.AA)
Comment
-
This is not going to be easy.
The first poll of the sensor produced the following:
Sep-27 11:02:39 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:02:44 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by vball61 View PostI encountered another issue, where after a second unsuccessful polling attempt of my garage door I/O Linc, the value for the sensor (1F.C3.AA:1) was changed from 'Unknown' (-1) to 'Open' (0), and polling became disabled for that I/O Linc (polling interval set to 0). Is that intended behavior? I didn't realize that polling had been disabled until I reviewed the log last night.
Thanks.
[Config]
FailedPollThreshold=2Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View PostI did add a feature that disables polling after two unsuccessful attempts. you can override the default below. Add the key/value to your ini and set to 0 to completely disable. Otherwise increase 2 to 5 for instance.
[Config]
FailedPollThreshold=2
It appears that there is still an issue with the device value being changed from -1 to 0 on the second unsuccessful polling attempt.
Comment
-
Originally posted by mrceolla View PostHi Mark,
I've received my replacement Siren and there was no change the behavior I described above. Have you had a chance to look into that at all?Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View PostThis is not going to be easy.
I've filtered my log to show only the ACKs around the false sensor setting (below). It looks like the I/O Linc sensor is being polled 3-5 seconds after the relay contact.
The incorrect ACK received at 'Sep-27 11:01:28 PM' also has a different 'Hops Left/Max Hops' value ($6) than the previous ACKs, so it doesn't appear that the plugin is using stale data.
Sep-27 11:05:18 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 11:05:14 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 00
Sep-27 11:03:58 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 11:03:54 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:02:44 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 11:02:39 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:01:28 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Sep-27 11:01:25 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 27 00 00
Sep-27 11:00:14 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 11:00:10 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 00
Sep-27 10:59:02 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 27 00 01
Sep-27 10:58:58 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 00
Sep-27 10:57:44 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 2B 00 01
Sep-27 10:57:39 PM Insteon Received a Direct ACK from Access Garage Door (1F.C3.AA): 1F C3 AA 2A 01 80 26 00 00
Comment
-
Originally posted by vball61 View PostI agree. This appears to be the same issue reported by Burrington in another thread.
I've filtered my log to show only the ACKs around the false sensor setting (below). It looks like the I/O Linc sensor is being polled 3-5 seconds after the relay contact.
The incorrect ACK received at 'Sep-27 11:01:28 PM' also has a different 'Hops Left/Max Hops' value ($6) than the previous ACKs, so it doesn't appear that the plugin is using stale data.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by mnsandler View PostI did add a feature that disables polling after two unsuccessful attempts. you can override the default below. Add the key/value to your ini and set to 0 to completely disable. Otherwise increase 2 to 5 for instance.
[Config]
FailedPollThreshold=2
Comment
-
Shutdown plugin. Added key. Restart pluginMark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
Comment