Keypad LINC not logging a,b,c,d keys

[Rob2791]

Hey All,

I noticed Homeseer is not logging my KeypadLinc "a,b,c,d" keys
But i believe it is correctly executing a event if programed when i press a key.
I reset the KeypadLinc and reprogramed the links.

I have Homeseer PRO 2.4.0.11 and HSPI_Insteon.dll version 1.4.2.1.

Here is my Device Link Table:

Link #16 Button Off controls Kitchen SwitchLinc Dimmer 1 (12.6B.18)
Link #14 Button On/Load controls Kitchen SwitchLinc Dimmer 1 (12.6B.18)
Link #2 Button A has local control reporting to HomeSeer
Link #3 Button B has local control reporting to HomeSeer
Link #4 Button C has local control reporting to HomeSeer
Link #5 Button D has local control reporting to HomeSeer
Link #6 Button Off has local control reporting to HomeSeer
Link #1 Button On/Load has local control reporting to HomeSeer
Link #9 Button A is controlled by HomeSeer using Insteon Link #3 (Button Control Group) - Command: On
Link #10 Button B is controlled by HomeSeer using Insteon Link #4 (Button Control Group) - Command: On
Link #11 Button C is controlled by HomeSeer using Insteon Link #5 (Button Control Group) - Command: On
Link #12 Button D is controlled by HomeSeer using Insteon Link #6 (Button Control Group) - Command: On
Link #13 Button Off is controlled by HomeSeer using Insteon Link #7 (Button Control Group) - Command: On
Link #17 Button Off is controlled by Kitchen SwitchLinc Dimmer 1 Switch/Load (12.6B.18) using Insteon Link #1 - Command: Off
Link #8 Button On/Load is controlled by HomeSeer using Insteon Link #2 (Button Control Group) - On Level 100%, Ramp Rate .1 Sec.
Link #7 Button On/Load is controlled by HomeSeer using Insteon Link #254 HomeSeer 'All Devices Group' - On Level 100%, Ramp Rate .1 Sec.
Link #15 Button On/Load is controlled by Kitchen SwitchLinc Dimmer 1 Switch/Load (12.6B.18) using Insteon Link #1 - On Level 100%, Ramp Rate .1 Sec.

*Any reason they are not in number order?

Thanks,
Rob

[mnsandler]

when you say "not logging my KeypadLinc "a,b,c,d" keys" are you referring to log entries in the hs log or updates to the status page?

the links are in a logical order based on their function so when people need help i can see things more easily.

[Rob2791]

When i press the a,b,c or d buttons it does not update the status or log an entry into hs log. But it works for the On/Load button and the Off button.

[mnsandler]

When i press the a,b,c or d buttons it does not update the status or log an entry into hs log. But it works for the On/Load button and the Off button.

that's strange since your links look correct.

turn on detailed debug logging and post a log snippet that captures a msg from the kpl when you manually press a btn (a,b,c, or d)

[Rob2791]

8/26/2010 6:13:34 PM Insteon PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec):01 12 BB 92 13 27 1F 41 11 03 - Event: New msg for PLC , Src[12.BB.92] Dst[13.27.1F] {Grp Cln} Cmd:Go ON Ex: 03

That is what happens when i push the "a" button on.

[Rob2791]

I think this will also help..
This is the log of when i tried to poll all insteon devices. I only have 5 devices i believe right now so its not to long.


**Log Attached

[mnsandler]

8/26/2010 6:13:34 PM Insteon PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec):01 12 BB 92 13 27 1F 41 11 03 - Event: New msg for PLC , Src[12.BB.92] Dst[13.27.1F] {Grp Cln} Cmd:Go ON Ex: 03

That is what happens when i push the "a" button on.

i need several more lines that occur after this msg.

please post your insteon.ini as well