Announcement
Collapse
No announcement yet.
HS3 Serial RS232 Direct Control
Collapse
X
-
Originally posted by cyf4746 View PostHi James,
Thanks for your help. I appreciate it.
Chin
- Create a virtual device for your Marantz Main Volume control
- In the Status Graphics tab of this device, delete the default values and add a New Range Value with start value of 0 and end value of 98. In the detail for this new range, set the values like this:
Prefix: MV
Suffix: \r
Dec Places: 0
Include Values: Checked
Has Additional Data: Unchecked
Has Scale: checked
Value Offset: 0
Control Type: Slider
Control Use: Not spec
- On the far right side, set the Status-Control to Both, then click Done at the bottom
Now Create an Event, say "Marantz Main Volume"
Use the new device and test whether it had it's "Value Set or Changed" as the event trigger
Then for the action, choose: "drhsIpPlugIn: Send Status/Value", then choose your Marantz connection and then select the new virtual device and then select Value.
Now, when you change the volume on the virtual device, it should send out the appropriate volume command to the receiver over the IP connection e.g. MV48\r
Now (and this is NOT my area of expertise), link the slider in your HSTouch project to the virtual device.
Hopefully this will allow control, then we may need to look at getting feedback to keep HS and HSTouch in sync, when the volume is controlled locally on the receiver.cheeryfool
Comment
-
Originally posted by cheeryfool View PostAnd here are a couple of screenshots:
Just got myself some time to continue to test on the Marantz Volume control.
After did as per your guides, still no luck. The " Send Status / Value action" seem not sending the volume setting command to the Marantz.
Here are the screen shoot from the log:
Comment
-
Originally posted by cheeryfool View PostAnd here are a couple of screenshots:
Just got myself some time to continue to test on the Marantz Volume control.
After did as per your guides, still no luck. The " Send Status / Value action" seem not sending the volume setting command to the Marantz.
Chin
Comment
Comment