Announcement
Collapse
No announcement yet.
Introducing Z-Tool+
Collapse
X
-
Zwave = Z-Stick, 3xHSM100� 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts = Various
-
Originally posted by VirtualPanther View PostNot available for iOS. Can't find anything in iTunes app storeHS4 Pro, 4.2.19.16 Windows 10 pro, Supermicro LP Xeon
Comment
-
Optimize and Full Optimize?
I have to wait for Apple to see what it really does.
But it would be nice if in addition to Add and Exclude, it would Optimize and Full Optimize a device since with battery powered devices you often need to be at the device doing something to Wake It Up to get Opt and Full Opt to work.
Comment
-
Originally posted by VirtualPanther View PostNot available for iOS. Can't find anything in iTunes app store
Originally posted by clay2young View PostI have to wait for Apple to see what it really does.
But it would be nice if in addition to Add and Exclude, it would Optimize and Full Optimize a device since with battery powered devices you often need to be at the device doing something to Wake It Up to get Opt and Full Opt to work.
Comment
-
Android and Windows Phone Apps Approved
The Android app is already in the Google Play store and the Windows Phone app will be in their store within the next 24 hours. FYI
https://play.google.com/store/apps/d...er.ztool&hl=en
Comment
-
Might be worth mentioning here that JSON control needs to be enabled for the app to work. I got a rather uninformative message from the app with JSON disabled.
I agree with Raptor. It really isn't good that anyone with the app installed and connected to my WiFi can play with my Z-wave network.
Paul..
Comment
-
Originally posted by sooty View PostMight be worth mentioning here that JSON control needs to be enabled for the app to work. I got a rather uninformative message from the app with JSON disabled.
I agree with Raptor. It really isn't good that anyone with the app installed and connected to my WiFi can play with my Z-wave network.
Paul..HS4Pro on a Raspberry Pi4
54 Z-Wave Nodes / 21 Zigbee Devices / 108 Events / 767 Devices
Plugins: Z-Wave / Zigbee Plus / EasyTrigger / AK Weather / OMNI
HSTouch Clients: 1 Android
Comment
-
I have tried to connect an Android phone and a tablet and neither seems to do anything. When I pick 'Select System' it is blank, should it have found Homeseer automatically?
I also have HS3 on port 8080, could that be the problem with the app? I tried turning off the Windows firewall on the Windows 7 computer but it did not help. Thanks.
Comment
-
Got everything updated, both the z-wave plugin to 3.0.1.23 and the hs3pro version to 3.0.0.194. I still run into errors when loading the app.
First Error
"Error GetInterfacesList
Response status codes does not indicate success: 401 ()."
Second Error:
"This application requires Homeseer version 3.0.0.192 or later. Error: Response status code does not indicate success: 401 ()."
It does see my Homeseer server though after hitting ok on the errors. I don't see my zwave unit though which is a z-net controller. Any ideas why this isn't working? I tried restarting the plugin, the whole pc, and my phone, also tried on another android device, but still a no go.
Comment
-
Originally posted by dilbert1 View PostI have tried to connect an Android phone and a tablet and neither seems to do anything. When I pick 'Select System' it is blank, should it have found Homeseer automatically?
I also have HS3 on port 8080, could that be the problem with the app? I tried turning off the Windows firewall on the Windows 7 computer but it did not help. Thanks.
Comment
Comment