Originally posted by whippersnapper
View Post
Announcement
Collapse
No announcement yet.
EnvisaLink DSC Plug-in - HS3 Beta Testing
Collapse
This is a sticky topic.
X
X
-
This plugin rocks thank you!
Only thing i struggle with is received messages from envisalink like 'invalid user code' it will not allow me to trigger a tts saying 'please try the correct code' etc...
I am convinced its something disabled on the pc1864 i have? can anyone elaborate if i am right and which section to setting to change?
Comment
-
Originally posted by spud View Postif you set the log level to Debug from the config page, do you see the InvalidAccessCode message in the logs?
If fact eyezon and connect2go fail to mention it in events aswell! so obviously not your plugin
Comment
-
Bypass v3.0.0.32 update
How does the functionality of this work? I played around with it and I can get my zones to bypass but I am not seeing anything in the log or otherwise that I can use to see if a zone is bypassed?
Changes to v3.0.0.32
- Added possibility to create additional "Zone Bypassed"devices that show if a zone is Bypassed or Active.
- Added possibility to rename and set the type of zones from the config page.
- The "User Access" string is now set to "Armed by System" when the system is armed from HomeSeer.
Comment
-
Originally posted by jterfehr2000 View PostHow does the functionality of this work? I played around with it and I can get my zones to bypass but I am not seeing anything in the log or otherwise that I can use to see if a zone is bypassed?
Changes to v3.0.0.32
- Added possibility to create additional "Zone Bypassed"devices that show if a zone is Bypassed or Active.
- Added possibility to rename and set the type of zones from the config page.
- The "User Access" string is now set to "Armed by System" when the system is armed from HomeSeer.
For EVL3 it is only supported if you have firmware 1.12.182 or later installed)
Then you need to go to the config page, and make sure the "Create additional devices for zone bypass status" and then click the "Update zone devices" button or restart the plug-in
see here for some screenshots: https://forums.homeseer.com/showthre...06#post1294406
Comment
-
Can't gain access
Hello Spud,
Now trying another of your PIs, but can't get it to work.
EVL4, Firmware Version: 01.02.130
Currently connected w/o problems with VeraPlus and a DSC plugin. Considering migration to HomeSeer
Problems:
- "EnvisaLink ERROR An attempt was made to access a socket in a way forbidden by its access permissions 192.168.xx.yy:4025"
Questions:
1) Do you know if the EVL accepts several TPI connections? I have tried to shut down my Vera and try HomeSeer, but do not get contact.
2) Is the mastercode used for anything else than disarming? Do things work without the master code (I do not feel comfortabel hardcoding it)
Thx,
Bob
Comment
-
Originally posted by Bobone View PostHello Spud,
Now trying another of your PIs, but can't get it to work.
EVL4, Firmware Version: 01.02.130
Currently connected w/o problems with VeraPlus and a DSC plugin. Considering migration to HomeSeer
Problems:
- "EnvisaLink ERROR An attempt was made to access a socket in a way forbidden by its access permissions 192.168.xx.yy:4025"
Questions:
1) Do you know if the EVL accepts several TPI connections? I have tried to shut down my Vera and try HomeSeer, but do not get contact.
2) Is the mastercode used for anything else than disarming? Do things work without the master code (I do not feel comfortabel hardcoding it)
Thx,
Bob
2) IIRC it's only used for disarming and some special arming mode, so yes most of the features should work without the code.
What system are running HS3 on?
Comment
-
If you require to maintain more than one connection you will need to use a proxy server. There are a few out there and here is a link to DSC Server
https://sites.google.com/site/mppsui...ds/dscserver-2
Comment
Comment