OMNI Locks Hard Wired
I still don't have locks working. They appear in the plug-in config and I can add them to HS3, but lock/unlock doesn't feedback to HS3.
Plug-in Log
14/07/2018 14:03:13 [2] [-->LOCK: 0 / LOCKED]
14/07/2018 14:03:13 [2] [-->LOCK: 0 0 0/-]
14/07/2018 14:03:13 [2] [-->LOCK:]
14/07/2018 14:03:13 [2] [---->AccessControlLock]
14/07/2018 14:03:13 [2] [UNSOLICITED: ExtendedStatus]
14/07/2018 14:03:09 [2] [-->LOCK: 1 / UNLOCKED]
14/07/2018 14:03:09 [2] [-->LOCK: 0 0 0/-]
14/07/2018 14:03:09 [2] [-->LOCK:]
14/07/2018 14:03:09 [2] [---->AccessControlLock]
14/07/2018 14:03:09 [2] [UNSOLICITED: ExtendedStatus]
The HS3 device attached to this lock shows value 0 regardless.
If I select LOCK/UNLOCK from HS3 device then the locks do indeed lock and unlock but again HS3 device doesn't update and always shows
Status 0 = OFF
Value 0 = "Unlocked"
I've removed the HS3 devices and re-added them via the plug-in, no change.
Any idea's?
I still don't have locks working. They appear in the plug-in config and I can add them to HS3, but lock/unlock doesn't feedback to HS3.
Plug-in Log
14/07/2018 14:03:13 [2] [-->LOCK: 0 / LOCKED]
14/07/2018 14:03:13 [2] [-->LOCK: 0 0 0/-]
14/07/2018 14:03:13 [2] [-->LOCK:]
14/07/2018 14:03:13 [2] [---->AccessControlLock]
14/07/2018 14:03:13 [2] [UNSOLICITED: ExtendedStatus]
14/07/2018 14:03:09 [2] [-->LOCK: 1 / UNLOCKED]
14/07/2018 14:03:09 [2] [-->LOCK: 0 0 0/-]
14/07/2018 14:03:09 [2] [-->LOCK:]
14/07/2018 14:03:09 [2] [---->AccessControlLock]
14/07/2018 14:03:09 [2] [UNSOLICITED: ExtendedStatus]
The HS3 device attached to this lock shows value 0 regardless.
If I select LOCK/UNLOCK from HS3 device then the locks do indeed lock and unlock but again HS3 device doesn't update and always shows
Status 0 = OFF
Value 0 = "Unlocked"
I've removed the HS3 devices and re-added them via the plug-in, no change.
Any idea's?
Comment