This thread will be used specifically for Release notes for the MeiHarmonyHub monitor and control plug-in.
Versions
3.1.0.18 (Beta)
This is a stop gap fix. From now on pressing "Disconnect" should ensure the client object is completely removed, even if it thinks it's already disconnected.
This is a stop gap fix. From now on Pressing "Connect" should disconnect (ensuring the client object is completely removed) and then a connection is re-attempted. This will occur even if the hub is already connected.
The above are stop gap fixes while I continue on the rewrite of the communication logic.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.17 (Beta)
Fixed issue with device management config screens not working properly.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.16 (Beta)
Fixed issue with config screens not showing.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1292671-meiharmonyhub-version-3-1-0-16-beta-is-now-available
3.1.0.15 (Beta)
More refactor of some parts of the code for reuseability.
Fixed HSEvent Errors.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1292496-meiharmonyhub-version-3-1-0-15-beta-is-now-available
3.1.0.14 (Beta)
Refactor of some parts of the code for reuseability.
Attempt to fix some IOException disconnects from not automatically trying a reconnect.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1291475-meiharmonyhub-version-3-1-0-14-beta-is-now-available
3.1.0.12 (Beta)
Fix for a bug introduced in 3.1.0.11 that when it adjusts the Hub ID in your settings, it no longer matches the devices addresses. The hub will check each device on each plugin start up and ensure each devices Address matches the unique ID in the settings for that hub.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286192-meiharmonyhub-version-3-1-0-12-beta-is-now-available
3.1.0.11 (Beta)
Runs discover on plugin start up to find hubs
If a hub with the .250 firmware is installed (and therefore has a new unique id), the plugin will update the existing hub settings with the new unique id.
If a hub is added via the "By Ip" method and another hub exists with the same IP address, but the new hub as the new style unique and Id and the old one has the old one, there will be a button on the old one called "Fix UID" which will merge the two devices keeping the old hub and it's settings and just changing it's unique id.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286161-meiharmonyhub-version-3-1-0-11-beta-is-now-available
3.1.0.10 (Beta)
Fixed installing 3.1.0.9 made the plugin disappear from the plugin management screen (doh!)
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286042-meiharmonyhub-version-3-1-0-10-beta-is-now-available
3.1.0.9 (Beta)
Code Cleanup
Fixed issue with Logitech's newest update to XMPP in firmware .250
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286015-meiharmonyhub-version-3-1-0-9-beta-is-now-available
3.1.0.8 (Beta)
Fixed bug where deleting the device for a virtual remote would prevent you from accessing any virtual remote configs in the UI.
Changed Logging to serilog and removed log4net. Logs still roll daily, but only 10 files will be kept (oldest dropping off).
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1284761-meiharmonyhub-version-3-1-0-8-beta-is-now-available
3.1.0.7 (Beta)
Added Network Discovery.
Fixed Typos
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1272599-meiharmonyhub-version-3-1-0-7-beta-is-now-available
3.1.0.6
Fixed issue with some invalid characters coming from Sonos in the Config.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1264626-meiharmonyhub-version-3-1-0-6-beta-is-now-available
3.1.0.5
Attempt to fix uncaught forceful disconnects and instability of plugin.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.4
No Changes. Version increased so that HS updater would accept the correct zip.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249718-meiharmonyhub-version-3-1-0-4-beta-is-now-available
3.1.0.3
Fixed issue with timeouts when getting the config from the hub on reconnects.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249614-meiharmonyhub-version-3-1-0-3-beta-is-now-available
3.1.0.2
Attempted to fix reconnect issue when having to do multiple subequent reconnects.
Fixed error when changing Activities
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249598-meiharmonyhub-version-3-1-0-2-beta-is-now-available
3.1.0.1
Added fix for a failed connect not completely severing the connection before trying again.
Added potential fix for reconnects failing when other messages are coming in.
General Refactoring to improve maintainability
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1245594-meiharmonyhub-version-3-1-0-1-beta-is-now-available
3.1.0.0
This release includes all the changes in Betas 3.0.3.1 through 3.0.3.18 (see release notes here: https://forums.homeseer.com/forum/3r...or-and-control)
Added the ability for the Plugin's Activity Voice Control devices to track the state of the activity (on/off) (See here: https://forums.homeseer.com/forum/3r...or-and-control)
Discussion here: https://forums.homeseer.com/forum/3r...-now-available
3.0.3.18 (Beta)
This fixed a bug in 3.0.3.17 where you were unable to add more than 1 command to a virtual remote device via the config screens.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373584
3.0.3.17 (Beta)
This fixed a bug in 3.0.3.16 where stopping and starting the plugin would release the virutal remote config settings
This fixed a bug in 3.0.3.16 where you couldn't add a new activity based command to a virtual remote.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373581
3.0.3.16 (Beta)
Added More Debugging around the adding of a hub and it's test connection (to show errors that might occur).
Added ability to create and manage "Virtual Remotes" (BETA!)(see here: https://forums.homeseer.com/showthread.php?p=1373578 and request thread here: https://forums.homeseer.com/showthread.php?t=196472)
Split apart configuration screens into their own pages to clean up the code and make it more manageable.
Added link to Plug-in forum subsection from the menu.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373579
3.0.3.15 (Beta)
Added Debugging around the adding of a hub and it's test connection (to show errors that might occur).
Removed some extraneous debugging messages.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1372199
3.0.3.14 (Beta)
Fixed issue on config screen when there is a device created but not enabled.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1370814
3.0.3.13 (Beta)
Added MORE debug code around connection code to try and prevent plugin crashes.
Fixed a bug around connecting where a failed connection would trigger as a forceful disconnect
Changed default for inter-device commands to 500ms instead of 1ms (all existing installs will not be changed)
Fixed bug where setting "Update Activity Device:" to anything other than "When Hub Updates Activity" meant the power off events from the hub weren't caught properly.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1370119
3.0.3.12 (Beta)
Added debug code around connection code to try and prevent plugin crashes.
Fixed a bug where trying to reconnect too fast can cause a connection failure reconnect loop. The plugin will now wait 10 seconds if it detects this scenario (this time span may change in the future).
Fixed a potential bug when the plugin attempts to sync the activities and devices and the plugin is not connected.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1365662
*This was released as 3.0.3.11, but I forgot to update the plugin's version in the exe file so it was reporting as 3.0.3.10. .12's only update over .11 was the changing of the version to .12 from .10.
3.0.3.10 (Beta)
Added feature that allows you to create a device for an activity for starting an activity via Google Home or Alexa. See: https://forums.homeseer.com/showthread.php?t=195326 and https://forums.homeseer.com/showthre...45#post1363545
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1363546
3.0.3.9 (Beta)
Fixed "Send Command" and "Send Device String of Commands" actions. They were still depending on settings stored in devices. They now correctly use the settings stored in the JSON settings files.
Added a new action called "Send String of Commands (Multiple Devices). This allows you to send commands to more than 1 device on a hub in the same command string. See: https://forums.homeseer.com/showthre...95#post1362095
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1362097
3.0.3.8 (Beta)
Changed so that Settings are stored in files instead of in the devices themselves
Upon first run of the plugin after update, it will attempt to copy over settings into the files.
Adjusted the layout of the settings page as recommended here: https://forums.homeseer.com/showpost...0&postcount=14
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1360651
3.0.3.7 (Beta)
Recalled because it didn't work in production.
3.0.3.6 (Beta)
Recalled because it didn't work in production.
3.0.3.5 (Beta)
Fixed styling on config page to match HomeSeer style recommendations
Added debugging to config page to try and track down issue (See: https://forums.homeseer.com/showthread.php?t=195005)
Known issues still existing in this version:
It appears sometimes that hub settings are lost which means the activity device no longer updates and the "Use Activity?" checkbox for the hubs is reset to unchecked.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1359528
3.0.3.4 (Beta)
Refactored Connection/Reconnection code to improve reliability
Fixed issue where a hub would disconnect, but pressing "connect" on the device management screen wouldn't attempt a connect.
Fixed "Send a command string" action.
Known issues still existing in this version:
It appears sometimes that hub settings are lost which means the activity device no longer updates and the "Use Activity?" checkbox for the hubs is reset to unchecked.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358977
3.0.3.3 (Beta)
Fixed issue where checking "Use Sleep?" didn't create the sleep device immediate like the other options for a hub (Use Activity? and Use Devices?)
Added Status value of 0 (Not Set; Status only) to Sleep timer device creation. Users with sleep timers already set can just add a new Status with Value 0 (zero) and status "Not Set" and set it to "Status".
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358167
3.0.3.2 (Beta)
Added more debugging centered around changing a hub's IP Address.
Added confirmation popup when clicking "Remove Hub from HS"
Added some help sections in the config screens.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358163
3.0.3.1 (Beta)
Added ability to set and track the sleep timer on a hub.
Fixed reconnect bug
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1357870
3.0.0.0
Initial Release
Discussion here: Coming Soon!
Versions
3.1.0.18 (Beta)
This is a stop gap fix. From now on pressing "Disconnect" should ensure the client object is completely removed, even if it thinks it's already disconnected.
This is a stop gap fix. From now on Pressing "Connect" should disconnect (ensuring the client object is completely removed) and then a connection is re-attempted. This will occur even if the hub is already connected.
The above are stop gap fixes while I continue on the rewrite of the communication logic.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.17 (Beta)
Fixed issue with device management config screens not working properly.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.16 (Beta)
Fixed issue with config screens not showing.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1292671-meiharmonyhub-version-3-1-0-16-beta-is-now-available
3.1.0.15 (Beta)
More refactor of some parts of the code for reuseability.
Fixed HSEvent Errors.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1292496-meiharmonyhub-version-3-1-0-15-beta-is-now-available
3.1.0.14 (Beta)
Refactor of some parts of the code for reuseability.
Attempt to fix some IOException disconnects from not automatically trying a reconnect.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1291475-meiharmonyhub-version-3-1-0-14-beta-is-now-available
3.1.0.12 (Beta)
Fix for a bug introduced in 3.1.0.11 that when it adjusts the Hub ID in your settings, it no longer matches the devices addresses. The hub will check each device on each plugin start up and ensure each devices Address matches the unique ID in the settings for that hub.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286192-meiharmonyhub-version-3-1-0-12-beta-is-now-available
3.1.0.11 (Beta)
Runs discover on plugin start up to find hubs
If a hub with the .250 firmware is installed (and therefore has a new unique id), the plugin will update the existing hub settings with the new unique id.
If a hub is added via the "By Ip" method and another hub exists with the same IP address, but the new hub as the new style unique and Id and the old one has the old one, there will be a button on the old one called "Fix UID" which will merge the two devices keeping the old hub and it's settings and just changing it's unique id.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286161-meiharmonyhub-version-3-1-0-11-beta-is-now-available
3.1.0.10 (Beta)
Fixed installing 3.1.0.9 made the plugin disappear from the plugin management screen (doh!)
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286042-meiharmonyhub-version-3-1-0-10-beta-is-now-available
3.1.0.9 (Beta)
Code Cleanup
Fixed issue with Logitech's newest update to XMPP in firmware .250
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1286015-meiharmonyhub-version-3-1-0-9-beta-is-now-available
3.1.0.8 (Beta)
Fixed bug where deleting the device for a virtual remote would prevent you from accessing any virtual remote configs in the UI.
Changed Logging to serilog and removed log4net. Logs still roll daily, but only 10 files will be kept (oldest dropping off).
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1284761-meiharmonyhub-version-3-1-0-8-beta-is-now-available
3.1.0.7 (Beta)
Added Network Discovery.
Fixed Typos
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1272599-meiharmonyhub-version-3-1-0-7-beta-is-now-available
3.1.0.6
Fixed issue with some invalid characters coming from Sonos in the Config.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1264626-meiharmonyhub-version-3-1-0-6-beta-is-now-available
3.1.0.5
Attempt to fix uncaught forceful disconnects and instability of plugin.
Discussion here: https://forums.homeseer.com/forum/au...-now-available
3.1.0.4
No Changes. Version increased so that HS updater would accept the correct zip.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249718-meiharmonyhub-version-3-1-0-4-beta-is-now-available
3.1.0.3
Fixed issue with timeouts when getting the config from the hub on reconnects.
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249614-meiharmonyhub-version-3-1-0-3-beta-is-now-available
3.1.0.2
Attempted to fix reconnect issue when having to do multiple subequent reconnects.
Fixed error when changing Activities
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1249598-meiharmonyhub-version-3-1-0-2-beta-is-now-available
3.1.0.1
Added fix for a failed connect not completely severing the connection before trying again.
Added potential fix for reconnects failing when other messages are coming in.
General Refactoring to improve maintainability
Discussion here: https://forums.homeseer.com/forum/audio-video-and-infra-red-ir-plug-ins/audio-video-and-infra-red-ir-discussion/meiharmonyhub-sirmeili/1245594-meiharmonyhub-version-3-1-0-1-beta-is-now-available
3.1.0.0
This release includes all the changes in Betas 3.0.3.1 through 3.0.3.18 (see release notes here: https://forums.homeseer.com/forum/3r...or-and-control)
Added the ability for the Plugin's Activity Voice Control devices to track the state of the activity (on/off) (See here: https://forums.homeseer.com/forum/3r...or-and-control)
Discussion here: https://forums.homeseer.com/forum/3r...-now-available
3.0.3.18 (Beta)
This fixed a bug in 3.0.3.17 where you were unable to add more than 1 command to a virtual remote device via the config screens.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373584
3.0.3.17 (Beta)
This fixed a bug in 3.0.3.16 where stopping and starting the plugin would release the virutal remote config settings
This fixed a bug in 3.0.3.16 where you couldn't add a new activity based command to a virtual remote.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373581
3.0.3.16 (Beta)
Added More Debugging around the adding of a hub and it's test connection (to show errors that might occur).
Added ability to create and manage "Virtual Remotes" (BETA!)(see here: https://forums.homeseer.com/showthread.php?p=1373578 and request thread here: https://forums.homeseer.com/showthread.php?t=196472)
Split apart configuration screens into their own pages to clean up the code and make it more manageable.
Added link to Plug-in forum subsection from the menu.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1373579
3.0.3.15 (Beta)
Added Debugging around the adding of a hub and it's test connection (to show errors that might occur).
Removed some extraneous debugging messages.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1372199
3.0.3.14 (Beta)
Fixed issue on config screen when there is a device created but not enabled.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1370814
3.0.3.13 (Beta)
Added MORE debug code around connection code to try and prevent plugin crashes.
Fixed a bug around connecting where a failed connection would trigger as a forceful disconnect
Changed default for inter-device commands to 500ms instead of 1ms (all existing installs will not be changed)
Fixed bug where setting "Update Activity Device:" to anything other than "When Hub Updates Activity" meant the power off events from the hub weren't caught properly.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1370119
3.0.3.12 (Beta)
Added debug code around connection code to try and prevent plugin crashes.
Fixed a bug where trying to reconnect too fast can cause a connection failure reconnect loop. The plugin will now wait 10 seconds if it detects this scenario (this time span may change in the future).
Fixed a potential bug when the plugin attempts to sync the activities and devices and the plugin is not connected.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1365662
*This was released as 3.0.3.11, but I forgot to update the plugin's version in the exe file so it was reporting as 3.0.3.10. .12's only update over .11 was the changing of the version to .12 from .10.
3.0.3.10 (Beta)
Added feature that allows you to create a device for an activity for starting an activity via Google Home or Alexa. See: https://forums.homeseer.com/showthread.php?t=195326 and https://forums.homeseer.com/showthre...45#post1363545
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1363546
3.0.3.9 (Beta)
Fixed "Send Command" and "Send Device String of Commands" actions. They were still depending on settings stored in devices. They now correctly use the settings stored in the JSON settings files.
Added a new action called "Send String of Commands (Multiple Devices). This allows you to send commands to more than 1 device on a hub in the same command string. See: https://forums.homeseer.com/showthre...95#post1362095
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1362097
3.0.3.8 (Beta)
Changed so that Settings are stored in files instead of in the devices themselves
Upon first run of the plugin after update, it will attempt to copy over settings into the files.
Adjusted the layout of the settings page as recommended here: https://forums.homeseer.com/showpost...0&postcount=14
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1360651
3.0.3.7 (Beta)
Recalled because it didn't work in production.
3.0.3.6 (Beta)
Recalled because it didn't work in production.
3.0.3.5 (Beta)
Fixed styling on config page to match HomeSeer style recommendations
Added debugging to config page to try and track down issue (See: https://forums.homeseer.com/showthread.php?t=195005)
Known issues still existing in this version:
It appears sometimes that hub settings are lost which means the activity device no longer updates and the "Use Activity?" checkbox for the hubs is reset to unchecked.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1359528
3.0.3.4 (Beta)
Refactored Connection/Reconnection code to improve reliability
Fixed issue where a hub would disconnect, but pressing "connect" on the device management screen wouldn't attempt a connect.
Fixed "Send a command string" action.
Known issues still existing in this version:
It appears sometimes that hub settings are lost which means the activity device no longer updates and the "Use Activity?" checkbox for the hubs is reset to unchecked.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358977
3.0.3.3 (Beta)
Fixed issue where checking "Use Sleep?" didn't create the sleep device immediate like the other options for a hub (Use Activity? and Use Devices?)
Added Status value of 0 (Not Set; Status only) to Sleep timer device creation. Users with sleep timers already set can just add a new Status with Value 0 (zero) and status "Not Set" and set it to "Status".
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358167
3.0.3.2 (Beta)
Added more debugging centered around changing a hub's IP Address.
Added confirmation popup when clicking "Remove Hub from HS"
Added some help sections in the config screens.
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1358163
3.0.3.1 (Beta)
Added ability to set and track the sleep timer on a hub.
Fixed reconnect bug
This version is only in the Beta section of the Updater
Discussion here: https://forums.homeseer.com/showthread.php?p=1357870
3.0.0.0
Initial Release
Discussion here: Coming Soon!