Have my first arduino on HS3 to read a set of momentary switches for lighting scene controls. Works great -- thanks for this PI.
One issue -- after HS3 reboots, the arduino plug-in doesn't reconnect, despite auto connect being checked. To connect it, i must manually:
a) uncheck auto-connect, b) recheck-auto-connect, c) press the "connect" button. Then it reliably connects....
For clarity, it does NOT connect if I just press connect, or if I uncheck autoconnect and press connect. ONLY the sequence above seems to work.
Log shows it connecting after startup, then about 15 secs later the PI reports "New Com Port Found". Not sure if that's the issue or not. But when I look at the Config page it shows disconnected.
Any thoughts? I see no one else having such issues so i'm sure i'm doing something really stupid. thanks
Current Date/Time: 6/27/2017 12:39:30 PM
HomeSeer Version: HS3 Pro Edition 3.0.0.318
Operating System: Microsoft Windows 10 Home - Work Station
System Uptime: 0 Days 2 Hours 10 Minutes 43 Seconds
IP Address: 192.168.1.64
Number of Devices: 1035
Number of Events: 175
Available Threads: 800
Enabled Plug-Ins
1.0.0.131: Arduino Plugin
2.0.5.0: BLTouchString
3.0.22.30668: Blue-Iris
0.0.0.26: drhsIpPlugIn
3.0.0.32: EasyTrigger
3.0.0.18: Ecobee
3.0.0.68: HSTouch Server
3.0.0.83: LutronCaseta
1.0.17155.370: MyQ
2.1.6.0: OpenSprinkler
1.0.0.5: Restart
1.2.2.0: SceneMaster
3.0.6132.16975: UltraGCIR3
3.0.6260.19461: UltraMon3
3.0.6265.20586: UltraWeatherWU3
3.0.1.130: Z-Wave
One issue -- after HS3 reboots, the arduino plug-in doesn't reconnect, despite auto connect being checked. To connect it, i must manually:
a) uncheck auto-connect, b) recheck-auto-connect, c) press the "connect" button. Then it reliably connects....
For clarity, it does NOT connect if I just press connect, or if I uncheck autoconnect and press connect. ONLY the sequence above seems to work.
Log shows it connecting after startup, then about 15 secs later the PI reports "New Com Port Found". Not sure if that's the issue or not. But when I look at the Config page it shows disconnected.
Any thoughts? I see no one else having such issues so i'm sure i'm doing something really stupid. thanks
Current Date/Time: 6/27/2017 12:39:30 PM
HomeSeer Version: HS3 Pro Edition 3.0.0.318
Operating System: Microsoft Windows 10 Home - Work Station
System Uptime: 0 Days 2 Hours 10 Minutes 43 Seconds
IP Address: 192.168.1.64
Number of Devices: 1035
Number of Events: 175
Available Threads: 800
Enabled Plug-Ins
1.0.0.131: Arduino Plugin
2.0.5.0: BLTouchString
3.0.22.30668: Blue-Iris
0.0.0.26: drhsIpPlugIn
3.0.0.32: EasyTrigger
3.0.0.18: Ecobee
3.0.0.68: HSTouch Server
3.0.0.83: LutronCaseta
1.0.17155.370: MyQ
2.1.6.0: OpenSprinkler
1.0.0.5: Restart
1.2.2.0: SceneMaster
3.0.6132.16975: UltraGCIR3
3.0.6260.19461: UltraMon3
3.0.6265.20586: UltraWeatherWU3
3.0.1.130: Z-Wave
Comment